Abstract:As an environmentally friendly non-mercury catalyst for the hydrochlorination of acetylene, Cu-based catalysts have always attracted attention. In this study, a series of phosphorus-doped Cu-based catalysts supported on activated carbon were prepared by the wet impregnation method, the difference of them is that the calcination temperature of phosphorus-doped carrier is 200 ℃, 400 ℃, 600 ℃ and 800 ℃ respectively. In the test conditions of T = 150℃, GHSV(C2H2) = 90 h− 1 and V(HCl): V(C2H2) = 1.2, the highest acetylene conversion was 83.1%. The type of phosphorus configuration and the distribution on the surface of the carrier can be adjusted by changing the calcination temperature. Among the different phosphorus species formed by the phosphorus doping treatment at different temperatures, the P-C bond formed after the phosphorus element is incorporated into the carbon lattice also accounts for an increasing proportion with the increase of the calcination temperature,which is accompanied by a higher and higher acetylene conversion. It can be seen that the P-C bond plays a key role in the acetylene hydrochlorination reaction in this system. Meanwhile, Cu2+ was identified as the main active component in the catalyst by XPS. The representative HAADF-STEM image shows isolated copper species, confirming that the single-center copper species supported on the carbon support is the active center of the acetylene hydrochlorination reaction. The coordination structure formed by the interaction between the P-C bond and the atomically dispersed Cu2+ species is an effective and stable active site in the reaction. Density functional theory calculations indicate that the reaction is proposed to proceed according to the Langmuir-Hinshelwood (L-H) mechanism. This work is the first to identify which phosphorus species plays a role in the hydrochlorination of acetylene, which may provide some ideas for the design and optimization of phosphorus doping catalysts in the future.

Deactivation of PdCl2/C catalyst in hydrochlorination of acetylene

Properties of Pt/C Catalysts for Hydrochlorination of Acetylene to Vinyl Chloride

Palladium-Based Catalysts for the Hydrochlorination of Acetylene: Reasons for Deactivation and Its Regeneration

Study on Deactivation by Sulfur and Regeneration of Pd/C Catalyst in Hydrogenation of N-(3-nitro-4-methoxyphenyl) Acetamide

The Activity and Stability of PdCl 2 /C-N Catalyst for Acetylene Hydrochlorination

Enhanced performance of Pd-[DBU][Cl]/AC mercury-free catalysts in acetylene hydrochlorination

Catalytic Activity of Au-K/C Catalyst for Acetylene Hydrochlorination

Study On The Cause Of Deactivation Of Pd/C In The Hydrodechlorination Reaction

Deactivation of a Pd/Al2O3 catalyst used in hydrodechlorination reactions: Influence of the nature of organochlorinated compound and hydrogen chloride

Deactivation of Au-Cu-K mercury-free catalyst in hydrochlorination of acetylene

Deactivation mechanisms for Pd/Al{sub 2}O{sub 3} acetylene hydrogenation catalysts

Deactivation Mechanism and Regeneration of Carbon Nanocomposite Catalyst for Acetylene Hydrochlorination

Bimetallic Pd-K/Y-zeolite catalyst in acetylene hydrochlorination for PVC production

DEACTIVATION AND REGENERATION OF NON﹣MERCURY CATALYST AuCl3﹣CuCl2/γ﹣Al2 O3

Isolated Single-Atomic Cu Catalyst Supported on P-doped Carbon for Hydrochlorination of Acetylene

Deactivation and Regeneration of Nitrogen Doped Carbon Catalyst for Acetylene Hydrochlorination

Thermodynamic analysis of acetylene hydrochlorination reaction system

Reaction and regeneration process of a novel Bi-Cu/SiO 2 catalyst for hydrochlorination of acetylene to produce vinyl-chloride monomers

Effect of the Transforming Ag into an Active Species (Silver Chloride) for the Acetylene Hydrochlorination

Catalyst Deactivation Process in 1,1,2-TCE Catalytic Dehydrochlorination Reaction

Gas-Phase Catalytic Hydrochlorination of Acetylene in A Two-Stage Fluidized-Bed Reactor