Abstract:Polylactide (PLA), which features desirable biodegradability and easy melt processability, has been recognized as one of the most promising environment-friendly polymer materials. However, its poor hydrophobicity and toughness limit its application in moisture-proof, barrier, and self-cleaning fields. In this work, we report a facile and efficient method capable of mass fabrication of PLA films with excellent comprehensive properties including superhydrophobicity, good stiffness-toughness balance, and self-cleaning function. Through a casting-thermal stretching process, PLA films with an oriented structure turn from inherently brittle to robust. By employing the breath figure method to assemble a relatively ordered microporous structure and treating the surface with hydrophobic silica nanoparticles, a micro-/nanostructured surface with low surface energy is constructed, which leads to superhydrophobicity. Meanwhile, a highly oriented structure provides excellent mechanical properties with a tensile strength of 92.2 MPa and an elongation at break of 112.3%, even after surface modification. The PLA film exhibits a good self-cleaning property and heat, acid, and water resistance, owing to the high crystallinity and stability of silica particles. This work could provide a facile approach with industrial potential to fabricate PLA materials with special wettability and excellent mechanical properties for self-cleaning and moisture-proof packaging applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00026?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00026</a>.DSC curves of PLA and PLA-S films (Figure S1 and Table S1), schematic illustration of the possible reaction between FAS and silica nanoparticles, and FTIR spectra and TGA curve of silica nanoparticles and FAS-modified silica nanoparticles (Figure S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_001.pdf">PDF</a>)Low adhesion of the PLA-S(BF)-12 film to the water droplet (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_002.avi">AVI</a>)Sliding angle of the PLA-S(BF)-12 film (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_003.avi">AVI</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for KMnO<sub>4</sub> (Movie S3) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_004.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for CNTs (Movie S4) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_005.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for tea (Movie S5) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_006.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for coffee (Movie S6) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_007.mp4">MP4</a>)Self-cleaning experiment of the PLA-S(BF)-12 film for milk (Movie S7) (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00026/suppl_file/sc1c00026_si_008.mp4">MP4</a>)This article has not yet been cited by other publications.

Fabrication of highly ordered nanoscale poly (lactic acid) surface based on self-assembled silica microspheres

Directed Self-Assembly of Hierarchical Supramolecular Block Copolymer Thin Films on Chemical Patterns

Poly(L-Lactic Acid)/Sio2 Nanocomposites Via in Situ Melt Polycondensation of L-Lactic Acid in the Presence of Acidic Silica Sol: Preparation and Characterization

Progress in Self-assembly Mechanism and Functionalization of Films Assembled by(Poly)siloxane

Fabrication and Characterization of Ag/polymer Nanocomposite Films Through Layer-by-layer Self-Assembly Technique

Fabrication Of Ordered Porous Polymer Film Via A One-Step Strategy And Its Formation Mechanism

Carbon Quantum Dots-Driven Surface Morphology Transformation Towards Superhydrophobic Poly(lactic Acid) Film

Facile Method for Fabrication of Nanocomposite Films with an Ordered Porous Surface

Superhydrophobic, Self-Cleaning, and Robust Properties of Oriented Polylactide Imparted by Surface Structuring

A Facile Method of Forming Nanoscale Patterns on Poly(ethylene Glycol)-Based Surfaces by Self-Assembly of Randomly Grafted Block Copolymer Brushes.

Large-Scale Fabrication of Three-Dimensional Ordered Polymer Films with Strong Structure Colors and Robust Mechanical Properties

Single-step Fabrication of Microsphere Arrays on the Surface of Flexible Materials by Direct Solidification

Polylactide Films with Superhydrophobicity and Superior Mechanical Properties Constructed by Combining Annealing Stretching and Nonsolvent-Induced Phase Separation

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

Development of Functionalized Polylactide Thin Films Using Poly(methylhydrogenosiloxane) Sol-Gel Process with Improved Antifouling Properties

A Simple, Low-Cost, and Green Method for Preparing Strong, Tough, and Ductile Poly(lactic acid) Materials with Good Transparency and Heat Resistance

Self-cleaning Poly(dimethylsiloxane) Film with Functional Micro/nano Hierarchical Structures.

Thin Film Self-Assembly of a Silicon-Containing Rod–Coil Liquid Crystalline Block Copolymer

Facile fabrication of stain‐resistant poly(lactic acid)/silicone powder fibers: Comprehensive structure characterization and performance evaluation

Preparation and Morphology Control of Highly Ordered Nanoporous Films from Block Copolymers

Valproic Acid Disposition and Protein Binding in Pregnancy