Abstract:Active magnetic bearings (AMBs) have been utilized widely to support high-speed rotors. However, in the case of AMB failure, emergencies, or overload conditions, the auxiliary bearing is chosen as the backup protector to provide mechanical supports and displacement constraints for the rotor. With lack of support, the auxiliary bearing will catch the dropping rotor. Accordingly, high contact forces and corresponding thermal generation due to mechanical rub are applied on the dynamic contact area. Rapid deterioration may be brought about by excessive dynamic and thermal shocks. Therefore, the auxiliary bearing must be sufficiently robust to guarantee the safety of the AMB system. Many approaches have been put forward in the literature to estimate the rotor dynamic motion, nonetheless most of them focus on the horizontal rotor drop and few consider the inclination around the horizontal plane for the vertical rotor. The main purpose of this paper is to predict the rotor dynamic behavior accurately for the vertical rotor drop case. A detailed model for the vertical rotor drop process with consideration of the rotating inclination around x- and y-axes is proposed in this paper. Additionally, rolling and sliding friction are distinguished in the simulation scenario. This model has been applied to estimate the rotor drop process in a helium circulator system equipped with AMBs for the 10 MW high-temperature gas-cooled reactor (HTR-10). The HTR-10 has been designed and researched by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University. The auxiliary bearing is utilized to support the rotor in the helium circulator. The validity of this model is verified by the results obtained in this paper as well. This paper also provides suggestions for the further improvement of auxiliary bearing design and engineering application.

Critical Speed Analysis of Active Magnetic Bearing-Test Rotor for HTR-10GT

Characteristic analysis of rotor dynamics and experiments of active magnetic bearing for HTR-10GT

Critical speed calculation of rigid rotor supported by AMB

Study on Active Magnetic Bearing Controller for HTR-10 Helium Turbine Rotor

Numerical Analysis of Magnetically Suspended Rotor in HTR-10 Helium Circulator Being Dropped into Auxiliary Bearings

Application of Active Magnetic Bearing for Rotor System Identification in the HTR-10MW

ICONE11-36524 PRELIMINARY MODAL ANALYSIS AND STRUCTURE DESIGN OF AN HTR-10 PCU ROTOR WITH AN ACTIVE MAGNETIC BEARING

Controller Design for a Flexible Rotor Supported by Active Magnetic Bearing Passing the Critical Rotational Speed

Technical Design and Principle Test of Active Magnetic Bearings for the Turbine Compressor of Htr-10gt

Design and Function Analysis of Multiphase PM Bearingless Motor with Single Set of Windings

Experimental Investigation on Dynamic Behaviour of Active Magnetic Bearing-Rotor System Subject to Base Vibration

Vibration Control of an Active Magnetic Bearings Flexible Rotor System Based on Adaptive Recursive Least Square Algorithm

Thermal Analysis and Experimental Validation of a 30 kW 60000 r/min High-Speed Permanent Magnet Motor With Magnetic Bearings

Thermal Growth Simulations Of The Rotor And Auxiliary Bearing Contact Events

Preliminary Research of Auxiliary Bearing in HTR-10GT Project

DESIGN AND EXPERIMENTS OF THE ACTIVE MAGNETIC BEARING SYSTEM FOR THE HTR-10

Preliminary Study on Rotor Dynamics of Magnetic Bearing for 10MW High Temperature Gas-cooled Reactor

Dynamic Analysis on Rotor System Supported by Active Electromagnetic Bearings

Rotor Dynamics Analysis of TRT Based on ARMD

Dynamic Analysis for the Rotor Drop Process and Its Application to a Vertically Levitated Rotor/Active Magnetic Bearing System

Behavior of A Magnetically Suspended Rotor Dropped into Auxiliary Bearings