Abstract:The axial deviation of the trapped particle in the lateral trap stiffness calibration and the maximal trapping force measurement has been reported, but has not yet been extensively analyzed in the literature. Due to the importance of the trapping force calibration in the applications, the axial deviation and the influence on the trap stiffness and the maximal trapping force measurement is analyzed both experimentally and theoretically. First, the trap stiffness calibration experiment is rechecked and more attention is paid to the axial displacement of the particle. The result confirms that the equilibrium position of the particle moves upward with the increase of the lateral displacement. In order to get better understanding of the phenomenon, the relation between the axial displacement and the lateral displacement is theoretically calculated by using the ray optics model. The comparison of the calculated result with the experimental one indicates that the particle equilibriums are not in the horizontal plane passing through the trap center, but are on a curved track where the external force is balanced with the trapping force. Then the relations between the trapping efficiency and the lateral displacement are derived, which shows that the experimentally calibrated trap stiffness is a reasonable approximation so long as the particle is kept in the central part of the trap. Finally, the difference between the maximal lateral trapping force and the escape force is discussed, and it is shown that the measured escape force is not as supposed to be the maximal lateral trapping force but far less than it.

Compare for Calibration Methods to Optical Trapping Force Upon Non-spherical Biological Cells

Methods of Calibration to Optical Trapping Force Upon Non-Spherical Cells

Molecular Force Spectroscopy on Cells

Measurement for Optical Trap Force on Cells Based on Electrokinetic Phenomena

A Calibration Method for Optical Trap Force by Use of Electrokinetic Phenomena

Simulation Of Forces On Mie Micro-Particles In Laser Trap

Calibration of Optical Tweezers Using Time of Flight Method

Axial Deviation of an Optically Trapped Particle in Trapping Force Calibration Using the Drag Force Method

Optically Trapped Particle Dynamic Responses under Varying Frequency Sinusoidal Stimulus

Extending calibration-free force measurements to optically-trapped rod-shaped samples

Comparison of Different Calibration Methods for Mueller Matrix Microscopy of Cells.

Dynamics calibration of optically trapped cells with adaptive control technology

Force characterization of live cells in automated transportation with robot-tweezers manipulation system

Computation for Optical Trap Stiffness Versus Refractive Index of Biological Cell

In Situ Calibrating Optical Tweezers with Sinusoidal-Wave Drag Force Method

Theoretical Research and Comparison of Forces in Optical Tweezers Based on Ray Optics Method and T Matrix Method

Information Entropy Method for Measuring the Axial Displacement of A Bead and Its Application to Analyzing the Trapping Force of Optical Trap

3D Calibration of Microsphere Position in Optical Tweezers Using the Back-Focal-plane Interferometry Method.

Design And Optimization Of The Diamagnetic Lateral Force Calibration Method

Comparison and Analysis of Different Methods in Calibration of the Spring Constant of AFM Cantilever Probes

Experimental measurement and analysis of the optical trapping force acting on a yeast cell with a lensed optical fiber probe