Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Calculation Method of the Velocity Weighting Vector for a Conformal Array of Underwater Acoustic Projecting Transducers

Calculation of Baffle Effect and Mutual Interaction Between Elements for an Underwater Acoustic Conformal Array with Application to the Optimization of Projecting Beampattern

Optimization Of Transmitting Beam. Patterns Of A Conformal Transducer Array

Investigation of Low-Sidelobe Beampattern Controlling Methods for Acoustic Transmitting Array of Underwater Vehicles

Optimization of Acoustic Emitted Field of Transducer Array for Ultrasound Imaging.

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Acoustic Field Calculation for a Compact Barrel-Stave Flextensional Transducer Array

Directivity calculation with experimental verification for a conformal array of underwater acoustic transducers

Sound Field Calculation of Underwater Acoustic Projecting Transducer Array of Arbitrary Shape

Modeling and calculation of acoustic radiation for a free-flooded ring transducer array

Transmitting Beam Control Method of Underwater Acoustic Transducer Array Based on Global Optimization

Beampattern optimization for a conformal projecting array of transducers with baffle effect and mutual coupling among elements

A Numerical Method for Acoustic Hull Array Noise Field Calculation That Optimizes Detection Performance

Calculation and Optimization of Acoustic Radiation Force Produced by a Two-Dimensional Transducer Array

Matched-Phase Weighting Beamformer to Improve the Gain of a Long Linear Array in the Range-Dependent Ocean Waveguide

Experimental Research of Multi-beam Forming of an Underwater Acoustic Array

Array Radiation Sound Field Calculation and Beam-Synthesis Based on Wave Superposition Method

A Method For Obtaining Sensor Array Manifold Using Sound Field Calculation

Calculation of a vessel scattering acoustic field by using prolate spheroid model

A Beam-Space High-Resolution Bearing Estimation Method for Underwater Physical Array and Its Experimental Studies

Conformal Array Beampattern Optimization Method and Experimental Research Based on Sound Field Forecast