Abstract:Ti65 alloy (Ti-5.8Al-4.0Sn-3.5Zr-0.5Mo-0.4Si-0.3Nb-1.0Ta-0.8W-0.05C) is the newly developed high temperature titanium alloy optimized from Ti60 alloys. The long-term service temperature of the alloy is as high as 650 °C, which is unattainable with the previous high temperature titanium alloy. It has excellent strength and excellent creep resistance, and has great application prospects in the aerospace industry. In the current study, the evolution of microstructure and texture of Ti65 alloy sheets developed by unidirectional rolling (UDR) and cross rolling (CR) followed by solution and aging treatment was investigated. The microstructure of the UDR sample consists of equiaxed α p , lamellar α s and few elongated α p , and the texture is the combination of minor B-type and major T-type texture, with the main component of basal {0001} fiber texture and { 01 1 ̄ 0 } , respectively. Due to more active slip system resulted by transformed direction, the microstructure of the CR sample consists of more elongated α p , and the { 01 1 ̄ 0 } texture characterized as R-type texture forms in addition to B/T-type texture. With aging temperature increasing, the microstructures for both transform to duplex microstructure, and the thicknesses of lamellar α s increase. B-type texture becomes stronger, while T/R-type texture are weakened, which is caused by the combination of recrystallization, spheroidization, and variant selection. An abnormal increasing of T/R-type texture but constant B-type texture happens in the CR-600 sample, which is related to high recrystallization fraction. It is expected that the research results can provide useful references for the rolling of high temperature titanium alloy sheets and the precise control of microstructure/texture.

Crystal Orientation Dependence of Young’s Modulus in Ti-Nb-based Β-Titanium Alloy

Mechanism of Crystallographic Orientation and Texture Evolution of Ti60 Alloy during Plane Strain Compression

The effect of crystallographic orientation on globularization and texture evolution during the annealing of a near α titanium alloy tube

Static Recrystallization Behavior and Texture Evolution during Annealing in a Cold Rolling Beta Titanium Alloy Sheet

Microstructure and Texture Evolution in a Post-dynamic Recrystallized Titanium During Annealing, Monotonic and Cyclic Loading

Texture evolution during multi-pass cold rolling and annealing of Ti-2Al-1.5Mn alloy

Texture Evolution and the Recrystallization Behavior in a Near Β Titanium Alloy Ti-7333 During the Hot-Rolling Process

The characterization of shape memory effect for low elastic modulus biomedical β-type titanium alloy

The Analysis of Changes in the Crystal Structure of Near-Beta Titanium Alloy in the Solution-Treated and Aged Conditions after Static Tensile Testing

Transverse texture weakening and anisotropy improvement of Ti-6Al-4V alloy sheet via asymmetric rolling and static recrystallization annealing

Microstructure Evolution of TB18 Alloy after Thermal Treatment and the Effect of Recrystallization Texture on Mechanical Properties

Effect of texture on shape memory property of Ti–16Nb high temperature shape memory alloy

Influence of Hot-Rolling Deformation on Microstructure, Crystalline Orientation, and Texture Evolution of the Ti6Al4V-5Cu Alloy

Texture and superelastic behavior of cold-rolled TiNbTaZr alloy

Enhancement of {110} Texture by Controlling α‐phase and Achievement of Low Young's Modulus and High Strength in Metastable β‐type Ti–Zr‐Based Alloys

Suppression of texture and enhancement of high-temperature tensile property in heavily deformed gradient Ti 2 AlNb alloy

Dependence of Mechanical Properties on the Microstructure Characteristics of a Near Β Titanium Alloy Ti-7333

The Influences of Process Annealing Temperature on Microstructure and Mechanical Properties of Near Β High Strength Titanium Alloy Sheet.

On Structural Sensitivity of Young’s Modulus of Ni-Rich Ti-Ni Alloy

Texture Evolution of Hot-Rolled, Near- α -Based Titanium Matrix Composites

Microstructure and Texture Variations in High Temperature Titanium Alloy Ti65 Sheets with Different Rolling Modes and Heat Treatments