Self-Networking Of Carbon Nanotubes

Zj Zhang,Bq Wei,Pm Ajayan

DOI: https://doi.org/10.1039/b201009g

2002-01-01

Abstract:Carbon nanotube self-assembly into honeycomb-networks via controlling the ratio of the catalyst over hydrocarbon in the vapor phase using a tunable chemical vapor deposition process.

What problem does this paper attempt to address?

Carbon Nanotubes Facilitate Silk Hierarchical Assembly by Dry Drawing

Quan Wan,Nicholas T. H. Farr,Peng Li,Darren Batey,Christoph Rau,John Rodenburg,Leihao Lu,Peter R. Laity,Zongpu Xu,Chris Holland,Cornelia Rodenburg,Mingying Yang

DOI: https://doi.org/10.1002/sstr.202300435

IF: 15.9

2024-01-01

Small Structures

Abstract:Biologically derived hierarchical structural materials not only boast energy‐efficient processing but also exhibit impressive mechanical performance. Silk stands as the gold standard in hierarchical fiber production, leveraging a unique combination of advantages. Nevertheless, the artificial replication of silk poses technical challenges related to precision processing and comprehensive molecular control. To address such issues, this study investigates the hierarchical assembly of solid regenerated silk in an air atmosphere, facilitated by the incorporation of carbon nanotube (CNT) seeding. Results obtained highlight that this CNT seeding facilitates multiscale structure development in response to post‐spin tensile stress. Such CNT bridged structure assembly bypasses some natural processing control variables (pH, ions) and the necessary solvent immersed state for conventional silk post‐drawing. Combining secondary electron hyperspectral imaging and 3D synchrotron X‐ray ptychotomography, this study reports silk protein conversion from a disordered as‐spun state to a longitudinal orientated semi‐crystalline nano structure during drawing. The development of microscale structure during the drawing process is attributed to the presence of CNTs, yielding mechanical properties comparable to, and frequently surpassing, those exhibited by native fibers. These findings collectively propose a framework for exploring novel processing routes and offer a practical means controlling self‐assembly in silk materials.
Preparation of Nanochain and Nanosphere by Self-Assembly of Gold Nanoparticles

C. Fang,Y. Fan,J. M. Kong,Z. Q. Gao,N. Balasubramanian

DOI: https://doi.org/10.1063/1.2955504

IF: 4

2008-01-01

Applied Physics Letters

Abstract:A self-assembly method is demonstrated to link nanoparticles into nanostructure of nanochain or nanosphere. Gold nanoparticles were covered with capping molecules by forming Au–S bonds with thiol group at one terminate. Another terminating group, carboxylic acid, showed strong complex interaction with inorganic linker Zr4+ to form covalent complex bond. The different nanostructures were obtained by moving a balance between two opposite interactions, the linking interaction of Zr4+ and the electrostatic repulsive interaction of net surface charge. When the capping molecule with different chain length was used, the linked nanochain feature exhibited a tunable interdistance between the neighboring nanoparticles.
Tunable Self‐Assembly of Carbon Nanotubes on Silica Surface

ZJ Zhang,BQ Wei,PM Ajayan

DOI: https://doi.org/10.1002/9781118788325.ch11

2002-01-01

Abstract:We report here self-assembly behaviors of carbon nanotubes on planar silica substrates, tunable with a catalytic chemical vapor deposition (CVD) approach. In this CVD process, different from several approaches reported, the catalyst (from ferrocene) and carbon (from xylene) are introduced simultaneously via the vapor phase; thus the ratio of catalyst/carbon in the vapor phase can be adjusted, which tunes the assembly behavior and growth pathways of nanotubes. Depending on this ratio, carbon nanotubes organize themselves into growth units of crystal-like, spherulite-like and honeycomb networks, at the early growth stages. Prolonged deposition leads to the nanotubes films of different morphologies, developed from these units. Our study provides the first ever glimpse of early stages of nanotubes growth and possible pathways through which nanotubes assemble and grow into continuous films.
A programmable multiscale assembly strategy of carbon nanotubes for honeycomb-like networks

Jianwei Zhang,Jianlei Cui,Huanhuan Mei,Fengqi Wei,Xiaoqiao He,Xuesong Mei

DOI: https://doi.org/10.1016/j.carbon.2022.07.026

IF: 10.9

2022-10-15

Carbon

Abstract:In order to meet the growing demand for high performance flexible transparent conductive electrode, starting from its hierarchical structure, a programmable multiscale assembly strategy of CNTs for honeycomb-like networks is proposed to hope to improve its performance. The analysis shows that the self-assembly method can realize the CNTs assembly of nonlinear hexagonal structure by constructing the pattern of SAMs. In this paper, a molecular dynamics model at atomic level is established for studying the self-assembly behavior to analyze its mechanism and the influencing factors of the CNTs distribution morphology. Then the process procedures are investigated to prepare multiscale honeycomb-like CNTs networks with size programmable on functionalized SiO2 substrate, while the accuracy of the molecular dynamics model is confirmed. Finally, the conductivity, transparency and transferability of the honeycomb-like CNTs networks are exploited and proved to be suitable for flexible conductive electrode with higher transparency than the CNTs film. This paper paves the way for the study of properties programmable related to the structure of CNTs assembly. Future work towards scalable and stable preparation of honeycomb-like CNTs networks will further validate them as a promising alternative to the traditional CNTs transparent conductive electrode and continue to make efforts in the field of photovoltaic and electrical sensing.

materials science, multidisciplinary,chemistry, physical
Molecular Dynamics Simulations of the Morphology Transformations in Unzipped Carbon Nanotubes

Jiafang Xu,Yingnan Zhang,Tao Wang,Xin Zheng,Wen Li,Zihan Dong,Wensen Wang

DOI: https://doi.org/10.1016/j.cplett.2016.06.029

IF: 2.719

2016-01-01

Chemical Physics Letters

Abstract:Tuning the assembly of carbon nanomaterials to obtain a kaleidoscope of carbon nanostructures is very important and challenging for the development of nanotechnology. Using molecular dynamics simulations method, we studied the morphology transformations of unzipped CNTs with different unzipping patterns. By modulating the unzipping patterns, the CNTs could self-assemble forming graphene nanoribbons and carbon nanoscrolls. From the energy analyzation, we find that the van der Waals interactions are responsible for the assembly of the unzipped CNTs. This unusual self-assembling method for CNTs could provide clues for further studies on the design of novel nanostructures.
Thermo-Driven Evaporation Self-Assembly and Dynamic Analysis of Homocentric Carbon Nanotube Rings

Hu Li,Han Ouyang,Min Yu,Nan Wu,Xinxin Wang,Wen Jiang,Zhuo Liu,Jingjing Tian,Yiming Jin,Hongqin Feng,Yubo Fan,Zhou Li

DOI: https://doi.org/10.1002/smll.201603642

IF: 13.3

2017-01-01

Small

Abstract:MWCNTs self-assemble into various homocentric rings in a thermo-driven self-assembly system. Closely packed and scatteredly packed MWCNT rings self-assemble on a Si-SiO substrate, whereas on a Au substrate smoothly packed MWCNT rings, rings with waviness, and rings with shuttle-like holes are seen to self-assemble. The dynamic self-assembly process includes convection flow and swirling flow.
Synthesis of Locally-Ordered Carbon Nanotube Arrays from Patterned Catalyst by Self-Assembly Technique

X. P. Zou,H. Abe,T. Shimizu,A. Ando,H. Tokumoto,S. M. Zhu,H. S. Zhou

DOI: https://doi.org/10.4028/www.scientific.net/ssp.121-123.483

2007-01-01

Abstract:Site-selective growth of multi-walled carbon nanotubes (MWCNTs) from an iron oxide nanoparticle catalyst patterned by drying-mediated self-assembly technique is present. The ethanol solution of the iron nitrate was employed as catalyst precursor. The catalyst precursor was mounted on silicon wafer by dip-coating. After evaporation of solvent at room temperature, the catalyst pattern formed. The catalyst pattern was employed to synthesize carbon nanotube pattern by chemical vapor deposition of ethanol vapor after oxidation of iron nitrate. The patterned array of MWCNTs was obtained with a dot size of around 5 'm and the distance of about 25 'm. The present method offers a simple and cost-effective method to grow carbon nanotubes with self-assembled patterns.
Flow-Induced Planar Assembly of Parallel Carbon Nanotubes and Crossed Nanotube Junctions

AY Cao,S Talapatra,R Vajtai,PM Ajayan

DOI: https://doi.org/10.1166/jnn.2005.140

2005-01-01

Journal of Nanoscience and Nanotechnology

Abstract:We report the in-situ assembly of carbon nanotubes by chemical vapor deposition of hydrocarbon precursor (a solution of ferrocene dissolved in isopropyl alcohol). We utilized the vapor stream inside the reaction chamber to comb carbon nanotubes along the same direction and obtained two-dimensional (planar) assembly of nanotubes with tunable distributions. When the carbon source was flowing at a relatively higher rate of approximately 0.2 ml/min, most of nanotubes were driven along the vapor flow direction during their growth process and formed a thin freestanding mat featured with a parallel arrangement, whereas a lower flowing rate (approximately 0.05 ml/min) only resulted in random spider-web structures consisting of crossed nanotube junctions with a variety of configurations (e.g., "+", "Y", "T" shapes and twists). The measured direction-dependent electrical resistance of these two assemblies was in agreement with respective structures, which was anisotropic for parallel nanotubes and nearly isotropic for random networks. Such large-area planar carbon nanotube arrays with controlled orientation and various junction configurations will facilitate the design and fabrication of electronic and mechanical devices.
Zigzag Assembly of Carbon Nanotubes Inside Au Microtrenches.

AY Cao,PM Ajayan

DOI: https://doi.org/10.1021/jp036635c

2004-01-01

Abstract:We report the self-assembly of zigzag patterns consisting of aligned carbon nanotubes inside Au microtrenches by chemical vapor deposition using ferrocene/xylene solution as the precursor. The zigzag nanotubes have uniform size and constant interpattern distance, which can be controlled by simply changing the width of the Au trenches. We demonstrated the tunable length and orientation of nanotubes during self-assembly, leading to a predictable motion of zigzag patterns. A growth model was proposed for the zigzag assembly of nanotubes, including the formation and subsequent splitting of an amorphous carbon layer on the pattern top. Rows of nanotube micropatterns regularly distributed along the Au trench are potential candidates as integrated arrays of thermal or mechanical detectors and actuators.
Tunable assembly of carbon nanospheres on single-walled carbon nanotubes.

Liangti Qu,Han Zhang,Jia Zhu,Liming Dai

DOI: https://doi.org/10.1088/0957-4484/21/30/305602

IF: 3.5

2010-01-01

Nanotechnology

Abstract:We have developed a process for spontaneous assembly of carbon nanospheres on aligned or nonaligned single-walled carbon nanotubes (SWNTs) by virtue of plasma-enhanced chemical vapor deposition (PECVD). The formation of carbon nanospheres with a uniform size of 30-60 nm is a catalyst-free process and strongly dependent on the applied plasma power and other factors. Both co-deposition and post-deposition approaches have been developed for effective assembly of carbon nanospheres on SWNTs. Furthermore, the method developed here also allows us to tailor the density and size of carbon nanospheres along nanotubes in a controllable way. The heterojunction structure based on different types of carbon demonstrated in this study represents a new hybrid manner for building complex systems which are promising for various applications.
Random Networks of Single-Walled Carbon Nanotubes

Zhenping Zhou,Lijie Ci,Li Song,Xiaoqin Yan,Dongfang Liu,Huajun Yuan,Yan Gao,Jianxiong Wang,Lifeng Liu,Weiya Zhou,Gang Wang,Sishen Xie

DOI: https://doi.org/10.1021/jp0363949

2004-01-01

Abstract:The self-assembled two-dimensional random networks composed of isolated SWNTs are obtained by a simple floating catalyst CVD method. A remarkable advantage of this technique is that the random networks can be formed at relatively low temperature with a wide density range, which is distinct from the previous reports. We also find that the deposited SWNTs constituting the networks are isolated rather than in bundles, and this result should be help for improving the preparation technique and exploring the formation mechanism of SWNTs.
Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

Zhengjun Zhang,Ye Zhao,Ya Zhou

2004-01-01

Abstract:Chemical vapor deposition (CVD) using ferrocene (Fe(C5H5)(2)) and xylene (C8H10) is frequently employed to fabricate, and to investigate the growth mechanism of nanotubes on planar substrates. The growth of carbon nanotubes by this approach, as we observed, showed interesting self-organization behaviors at early growth stages, which is closely related to the ratio of catalyst over carbon in the depositing vapor and to the growth kinetics of CNTs. Investigation on the very early deposition stages of this CVD method demonstrated that, the self-organization of carbon nanotubes is determined by the way that the catalyst particles adhere to the substrate surface, and the growth kinetics following. By adjusting these factors at the early deposition stages, we successfully fabricated different microstructures of carbon nanotubes and continuous films of CNTs on flat silicon substrates. This provides ways to control the growth and self-organization of carbon nanotubes.
Gas-phase synthesis of carbon nanotube-graphene heterostructures

Saeed Ahmad,Hua Jiang,Kimmo Mustonen,Qiang Zhang,Aqeel Hussain,Abu Taher Khan,Nan Wei,Mohammad Tavakkoli,Yongping Liao,Er-Xiong Ding,Jani Kotakoski,Esko I. Kauppinen

DOI: https://doi.org/10.48550/arXiv.1904.08323

2019-04-17

Abstract:Graphene and carbon nanotubes (CNTs) share the same atomic structure of hexagonal carbon lattice. Yet, their synthesis differs in many aspects, including the shape and size of the catalyst. Here, we demonstrate a floating-catalyst chemical vapor deposition (FCCVD) technique for substrate-free, single-step growth of CNT-graphene heterostructures (CNT-G-H) using ethylene as a carbon source. The formation of CNT-G-H is directly evidenced by lattice-resolved (scanning) transmission electron microscopy (STEM) and electron diffraction experiments, corroborated by atomic force microscopy (AFM). Our experiments show the relative number density of graphene-nanoflakes can be tuned by optimizing the synthesis conditions. Since in the applied process the formation of the structures take place in gas-suspension, the as-synthesized CNT-G-H films can be deposited on any surface in ambient temperature with an arbitrary thickness. Moreover, this process of CNT-G-H synthesis with strong universality has also been realized in multiple systems of ethylene-based FCCVD with various catalysts and set-ups.

Applied Physics,Materials Science
Nanopore Structure of Highly Enriched Double-Walled Carbon Nanotube Network Assemblies

Jae Hun Hwang,Dong Young Kim

DOI: https://doi.org/10.1016/j.micromeso.2024.113336

IF: 5.876

2024-09-13

Microporous and Mesoporous Materials

Abstract:An efficient catalytic chemical vapor deposition method utilizing an Fe-Mo/MgO-supported catalyst was developed, allowing the highly selective synthesis of double-walled carbon nanotubes (DWCNTs) in high yield, exceeding 89%. The carbon yield, tube diameter, and crystallinity of the synthesized DWCNTs were characterized using high-resolution transmission electron microscopy, field-emission scanning electron microscopy, thermogravimetric analysis, and Raman spectroscopy. The nanopore structure and adsorption characteristics of the DWCNTs purified by removing the support and catalyst (i.e., Fe-Mo/MgO) were analyzed via N 2 adsorption–desorption measurements at 77 K. A remarkable advantage of the highly enriched DWCNTs with small bundle network structures is that guest molecules can easily access the outer (i.e., external) surface of the DWCNTs, resulting in a large specific surface area (SSA) of > 691 m 2 g -1 and pore volume of 2.70 mL g -1 in the double-walled structures. Thus, highly enriched DWCNTs with large pore volumes and SSAs prepared via facile solution-based processes can yield CNT-based structures for applications in high-performance energy storage.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Multiple graphdiyne‐like chains self‐assemble into carbon nanotubes

Rui Wang,Houbo Yang,Danhui Zhang,Xuemei Sun,Dengbo Zhang,Jianhui Shi,Ruquan Liang,Anmin Liu

DOI: https://doi.org/10.1002/sia.7295

2024-02-18

Surface and Interface Analysis

Abstract:The formation process of core–shell structure from multiple graphdiyne‐like chains and carbon nanotube is investigated by a molecular dynamics simulation. Multiple graphdiyne‐like chains self‐curl into helical structures located inside carbon nanotubes. The entire process involves two steps: sliding and twisting. A detailed analysis is conducted on the formation mechanism. Both the van der Waals potential well and the π–π stacking interaction between carbon nanotube and graphdiyne‐like chains play a major role in the self‐assemble process. Furthermore, the influence factors such as the number of graphdiyne‐like chains, the diameter of carbon nanotube, the length of carbon nanotube, the length of graphdiyne‐like chains, and the simulation temperature is also investigated. The research results are an important theoretical basis for manufacturing high‐quality carbon nanomaterials and other novel nanostructures.

chemistry, physical
From Carbon Nanotube Crystals to Carbon Nanotube Flowers

Zhang Zhengjun,Zhao Ye,Zhou Ya

DOI: https://doi.org/10.1016/s1007-0214(05)70144-9

2005-01-01

Abstract:We have investigated the very initial deposition stages of chemical vapor deposition (CVD) with ferrocene (Fe(C5H5)2) and xylene (C8H10) for growing carbon nanotubes, and made clear that the mechanism for the self-organization behaviors of nanotubes at different growth stages by this approach. For instance, the organization of nanotubes into flower-like structures at prolonged deposition is developed from the crystal-like structures formed at early growth stages, both of which are closely related to and determined by the very initial deposition stages of this CVD approach. Based on this approach, ways have been established to build up different architectures of carbon nanotubes, by controlling the initial deposition stages of the CVD process, with which we have realized the selective growth of self-organized carbon nanotube structures. This study provides a new idea for growing carbon nanotube architectures by CVD.
Patterning of hydrophobic three-dimensional carbon nanotube architectures by a pattern transfer approach.

Jia-Qi Huang,Qiang Zhang,Meng-Qiang Zhao,Guang-Hui Xu,Fei Wei

DOI: https://doi.org/10.1039/c0nr00203h

IF: 6.7

2010-01-01

Nanoscale

Abstract:Hydrophobic three-dimensional carbon nanotube architectures with patterned morphologies have been fabricated by a pattern transfer method, in which the components of the masks served as promoters/inhibitors to increase/decrease the catalyst activity for the self-organization of carbon nanotubes into a family of patterned nanoarchitectures.
Organizing Single-Walled Carbon Nanotubes on Gold Using a Wet Chemical Self-Assembling Technique

Zhongfan Liu,Ziyong Shen,Tao Zhu,Shifeng Hou,Lizhen Ying,Zujin Shi,Zhennan Gu

DOI: https://doi.org/10.1021/la9914110

IF: 3.9

2000-01-01

Langmuir

Abstract:We provide a wet chemical approach for organizing randomly tangled single-walled carbon nanotubes (SWCNTs) on gold surfaces. The as-grown nanotubes were first chemically cut into short pipes and thiol-derivatized at the open ends. The ordered assembly of SWCNTs was made by their spontaneous chemical adsorption to gold via Au-S bonds. Tapping mode atomic force microscopy (AFM) images clearly show that the nanotubes have been organized on gold, forming a self-assembled monolayer structure with a perpendicular orientation. The adsorption kinetics of the nanotubes was very slow in comparison to conventional alkanethiols. The adsorption rate varied inversely with tube length. The nanotubes tend to form bundles as the adsorption propagates, following a "nucleation adsorption mechanism". This work demonstrates that "giant" carbon nanotubes can be assembled on Au surfaces using wet chemistry similar to that exploited for "small" organic self-assembling species. We believe that assembled nanotube arrays will provide wide possibilities for applications.
Self-organization of nitrogen-doped carbon nanotubes into double-helix structures

guili tian,mengqiang zhao,qiang zhang,jiaqi huang,fei wei

DOI: https://doi.org/10.1016/j.carbon.2012.07.022

IF: 10.9

2012-01-01

Carbon

Abstract:Self-organization of nitrogen-doped carbon nanotube (N-CNT) double helices was achieved by chemical vapor deposition (CVD) with Fe–Mg–Al layered double hydroxides (LDHs) as the catalyst precursor. The as-obtained N-CNT double helix exhibited a closely packed nanostructure with a catalyst flake on the tip, which connected the two CNT strands on both sides of the flake. A mechanism for the self-organization of N-CNTs into double-helix structures with a moving catalyst head is proposed. Effective carbon/nitrogen sources, high-density active catalyst nanoparticles, space confinement, and the precise chiral match between the two CNT strands are found to be crucial for the N-CNT double helix formation. The morphologies of N-CNTs can be well tuned between bamboo-like and cup-stacked structures, and a CNT/N-CNT heterojunction can be constructed by changing the carbon feedstock from C2H4 to CH3CN during CVD growth. N-CNT double helices with a length of 10–36μm, a screw pitch of 1–2μm, a CNT diameter of 6–10nm, and a N-content of 2.59at.% can be synthesized on the LDH catalysts by the efficient CVD growth.
A New Understanding of Carbon Nanotube Growth: Activation and Deactivation of a Catalyst

Yueling Zhang,Qing Yu,Xidong Wang,Yajun Tian

DOI: https://doi.org/10.1016/j.apsusc.2014.01.165

IF: 6.7

2014-01-01

Applied Surface Science

Abstract:Due to the crucial role of a catalyst in growth of carbon nanotubes (CNTs) by a chemical vapor deposition, it is important to understand the activation and deactivation of a catalyst for controlling production of CNTs. Using molecular benzene as the carbon source and Fe-Co/gamma-Al2O3 as catalyst, multi-CNTs were synthesized with a thermal analyzer coupled a mass spectrometer in different atmospheres of N-2 and H-2. Very different thermogravimetry behaviors (TG-DTG) were observed during CNT growth, indicating that CNTs experienced very different activation and deactivation processes. In a N-2 atmosphere, a catalyst particle was activated jumpily, then about half of catalyst surface was covered by the produced CNTs generated on one side of a catalyst, leading to trigger deactivation immediately following activation; in a H-2 atmosphere, a catalyst was activated gradually, and deactivation developed gradually, the total CNT yield in H-2 was higher than in N-2, suggesting H-2 suppressed the deactivation development of a catalyst by cleaning the amorphous carbon over a catalyst. In combination of the mass spectral measurements, the activation and deactivation mechanism of a catalyst in an inert and reducing reaction atmospheres gas were revealed. (C) 2014 Elsevier B.V. All rights reserved.

Self-Networking Of Carbon Nanotubes

Carbon Nanotubes Facilitate Silk Hierarchical Assembly by Dry Drawing

Preparation of Nanochain and Nanosphere by Self-Assembly of Gold Nanoparticles

Tunable Self‐Assembly of Carbon Nanotubes on Silica Surface

A programmable multiscale assembly strategy of carbon nanotubes for honeycomb-like networks

Molecular Dynamics Simulations of the Morphology Transformations in Unzipped Carbon Nanotubes

Thermo-Driven Evaporation Self-Assembly and Dynamic Analysis of Homocentric Carbon Nanotube Rings

Synthesis of Locally-Ordered Carbon Nanotube Arrays from Patterned Catalyst by Self-Assembly Technique

Flow-Induced Planar Assembly of Parallel Carbon Nanotubes and Crossed Nanotube Junctions

Zigzag Assembly of Carbon Nanotubes Inside Au Microtrenches.

Tunable assembly of carbon nanospheres on single-walled carbon nanotubes.

Random Networks of Single-Walled Carbon Nanotubes

Buliding microstructures of organized carbon nanotubes by chemical vapor deposition

Gas-phase synthesis of carbon nanotube-graphene heterostructures

Nanopore Structure of Highly Enriched Double-Walled Carbon Nanotube Network Assemblies

Multiple graphdiyne‐like chains self‐assemble into carbon nanotubes

From Carbon Nanotube Crystals to Carbon Nanotube Flowers

Patterning of hydrophobic three-dimensional carbon nanotube architectures by a pattern transfer approach.

Organizing Single-Walled Carbon Nanotubes on Gold Using a Wet Chemical Self-Assembling Technique

Self-organization of nitrogen-doped carbon nanotubes into double-helix structures

A New Understanding of Carbon Nanotube Growth: Activation and Deactivation of a Catalyst