Abstract:The fatigue behavior of as-cast Mg–12%Zn–1.2%Y–0.4%Zr alloy has been investigated. The S–N curve showed that the fatigue strength at 107 cycles was 45MPa. Scanning electron microscopy observations on the surfaces of the failed and unfailed specimens (after up to 1×107 cycles) suggested that the slip bands could act as preferential sites for non-propagating fatigue crack initiation, and the I-phase could effectively retard fatigue crack propagation (FCP). The macro fracture morphology clearly indicated that the overall fracture surface was composed of three regions, i.e. a fatigue crack initiation region (Region 1), a steady crack propagation region (Region 2) and a tearing region (Region 3). High-magnification fractographs showed that only porosities can act as the crack initiation sites for all specimens. Moreover, for specimens with fatigue lifetimes lower than 2×105 cycles, the cracks mostly initiated at the subsurface or surface of the specimen. However, when the fatigue lifetime was equal to or higher than 2×105 cycles, the fatigue crack initiation sites transferred to the interior of the specimen. The maximum stress intensity factors corresponding to the transition sites between Regions 1, 2 and 3 were 2 and 4.2MPam1/2, respectively. When the maximum stress intensity factor Kmax was lower than 4.2MPam1/2, in the steady crack propagation region, due to the retarding effect of I-phase/α-Mg matrix interfaces, the fatigue cracks tended to pass the I-phase/α-Mg matrix eutectic pockets directly and propagated through the grain cells, resulting in the formation of many flat facets on the fracture surface. However, when the maximum stress intensity factor was higher than 4.2MPam1/2, in the sudden failure region, the rigid bonding of I-phase/α-Mg matrix interfaces was destroyed and the cracks preferentially propagated along the interfaces, which resulted in the fracture surface being almost completely composed of cracked I-phase/α-Mg matrix eutectic pockets. Based on microstructural observation and the fracture characteristics of the two regions, it is suggested that with an increase in crack tip driving force, the FCP mode changes from transgranular propagation to intergranular propagation.

Fatigue behavior of Zr–Ti–Ni–Cu–Be bulk-metallic glasses

Fatigue Behavior of a High-Toughness Zr 61 Ti 2 Cu 25 Al 12 Bulk Metallic Glass

Fatigue Endurance Limit and Crack Growth Behavior of a High-Toughness Zr 61 Ti 2 Cu 25 Al 12 Bulk Metallic Glass

Tension-Tension Fatigue Behavior of High-Toughness Zr61Ti2Cu25Al12 Bulk Metallic Glass

Improving fatigue property of Zr–Ni–Al metallic glass by tailoring chemical composition with high structure stability

Compression-compression Fatigue Behavior of CuZr-based Bulk Metallic Glass Composite Containing B2 Phase

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Stress-life fatigue behavior and fracture-surface morphology of a Cu-based bulk-metallic glass

Fatigue and fracture behavior of bulk metallic glass

Ultrasonic Fatigue of Ti&lt;sub&gt;40&lt;/sub&gt;Zr&lt;sub&gt;10&lt;/sub&gt;Cu&lt;sub&gt;34&lt;/sub&gt;Pd&lt;sub&gt;14&lt;/sub&gt;Sn&lt;sub&gt;2&lt;/sub&gt; Glassy Alloy

Fracture and fatigue behaviour of a laser additive manufactured Zr-based bulk metallic glass

High-temperature wear behavior of a Zr-based metallic glass

Superplasticity and Superplastic Forming Ability of a Zr–Ti–Ni–Cu–Be Bulk Metallic Glass in the Supercooled Liquid Region

Study on high cycle fatigue behavior of gravity cast Mg-3Nd-0.2Zn-Zr magnesium alloy

Glass-Forming Ability, Mechanical Properties, and Energetic Characteristics of ZrCuNiAlNbHfY Bulk Metallic Glasses

Mechanical Properties for a Series of Zr-based Bulk Metallic Glasses

Locating bulk metallic glasses with high fracture toughness: Chemical effects and composition optimization

Wear Behaviors of a Ti-Based Bulk Metallic Glass at Elevated Temperatures

The Fatigue Behavior of I-phase Containing As-Cast Mg–Zn–Y–Zr Alloy

High Cycle Fatigue Behavior and Mechanical Performance of a Novel Sand-Cast Mg-Nd-Gd Alloy: Effect of Heat Treatment

Damage-Tolerant Zr-Cu-Al-Based Bulk Metallic Glasses with Record-Breaking Fracture Toughness