Abstract:The idea of reusing municipal incinerator bottom ash (MIBA), the residue from incinerating municipal solid wastes, fits nicely in a circular economy scheme, which leads to an avoided impact of landfill disposal, and at the same time reduces the demand of natural resources. Past studies have attempted to add 20 to 60% MIBA for ceramic production, and resulted in some inspiring success. Focused on delivering quality interior and exterior floor tiles meeting industrial standards, this study investigated the operative conditions and the optimum amount of MIBA in the mix. In this study, only the kaolinite clay and MIBA were used. Before making specimens, raw materials of clay and MIBA underwent SEM, EDS, and TCLP tests to determine their chemical contents. Six sets of specimens with different replacement levels of MIBA (0%, 5%, 10%, 15%, 20%, and 30%) were then prepared. These specimens were fired at 1000°C, 1050°C,1100°C, and 1150°C and the products underwent a series of mechanical tests to verify their performance. NMR (nuclear magnetic resonance spectroscopy) were also used to determining the organic compound structure after each specimens' crystallization. Research results showed that proper mix of MIBA up to 20% could result in quality tiles complying with specifications for interior and exterior flooring applications at certain kiln temperatures, while the specimens with 30% MIBA failed to meet either bending strength or size shrinkage requirement at all four kiln temperatures, and could not deliver a satisfactory result.

Preparation of Gold Tailing Ceramic Tile Containing Bamboo Charcoal

Effect of Bamboo Charcoal on Microstructure and Performance of Fly Ash Ceramic Tile

Diopside-Based Glass-Ceramics from Chrysotile Asbestos Tailing

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Preparation and Performance of Ceramic Tiles with Steel Slag and Waste Clay Bricks

Study on Preparation Technology and Properties of Tiutai Porous Ceramics

Preparation and characterization of ceramic foams mainly containing extracted titanium residues and silica tailings

Recycling of extracted titanium slag and gold tailings for preparation of self-glazed ceramic foams

Preparation of permeable ceramic bricks with tungsten tailings by two-stage calcination technology

Preparation and characterization of glass-ceramics with granite tailings and titanium-bearing blast furnace slags

Preparation of lightweight high-strength thermal insulation and decoration integration porous ceramics using red mud

Study of the operative conditions and the optimum amount of municipal incinerator bottom ash for the obtainment of ceramic floor tiles

Effect of TiO2 on crystallization kinetics, microstructure and properties of building glass-ceramics based on granite tailings

Effective utilization of extracted titanium tailing to prepare high performance glass-ceramic and their formation mechanism

Preparation of Diatomite-Based Porous Ceramics Containing Carbon and Its Adsorption to Methylene Blue

Synthesis of a ceramic tile base based on high-alumina fly ash

Preparation of high porosity bricks by utilizing red mud and mine tailing

Preparation of Ca–Si–Al–Mg porous ceramics by Co-operation of Ca&Mg-contained soda residue and altered rock gold tailings

Effects of sintering parameters on the preparation and properties of foamed ceramics from cyanide tailings

Blending electric arc furnace slag and municipal incineration bottom ash to make ceramic tiles

Study on comprehensive properties of mullite porous ceramics prepared from gangue based on sintering temperature