Abstract:The growing population and rapid urbanization have accelerated the global generation of solid waste and increased the demand for construction materials. In this context, the utilization of solid wastes as construction materials can not only eliminate the landfilling of solid wastes, but also alleviate the demand for construction materials and reduce the burden of consuming natural aggregates. Hence, this study investigated the utilization of two solid wastes, fine incineration bottom ash (IBA) and waste marine clay (MC) as a construction material. A industry by-product, ground granulated blast-furnace slag (GGBS), was used to further increase the strength and reduce the leaching of heavy metals of IBA-MC; the traditional binder, ordinary Portland cement (OPC), was also used as comparison. The results showed that IBA and MC can complement each other's limitations, i.e. IBA largely reduced the water content of MC; MC reduced the leaching concentrations of heavy metals from IBA. The addition of GGBS and OPC significantly increased the strength of IBA-MC. For instance, the UCS of GGBS-IBA-MC with IBA/MC ratio of 7/3 and GGBS content of 7.5% (2805 kPa) was more than 10 times higher than that of IBA-MC (247 kPa). With the addition of GGBS, the leaching of heavy metals of GGBS-IBA-MC further decreased compared with IBA-MC and OPC-IBA-MC. For GGBS contents of 5% and 7.5%, leaching concentrations of all studied heavy metals in GGBS-IBA-MC with IBA/MC ratios of 5/5 and 7/3 satisfied the requirements of DNK-Category 3 for construction materials. The X-ray diffraction (XRD) and Scanning Electron Microscope with energy dispersive X-ray spectrometry (SEM-EDX) tests were also carried out and the hydration products such as ettringite and calcium silicate hydrate (CSH) were identified as the main reasons for improved strength. To sum up, GGBS-IBA-MC has the potential to be used as a construction material.

Blending electric arc furnace slag and municipal incineration bottom ash to make ceramic tiles

Study of the operative conditions and the optimum amount of municipal incinerator bottom ash for the obtainment of ceramic floor tiles

Preparation and Performance of Ceramic Tiles with Steel Slag and Waste Clay Bricks

Production of pyroxene ceramics from the fine fraction of incinerator bottom ash

The effects of fine fire clay sanitaryware wastes on ceramic wall tiles

Effect of Waste Ceramic Powder on Properties of Alkali-Activated Blast Furnace Slag Paste and Mortar

Technological behaviour and leaching tests in ceramic tile bodies obtained by recycling of copper slag and MSW fly ash wastes

Properties of ceramics prepared using dry discharged waste to energy bottom ash dust

Experimental Investigation on Feasibility of utilizing Phosphogypsum in E-Glass Fiber-incorporated Non-fired Ceramic Wall Tile

Artificial intelligence-based predictive model for utilization of industrial coal ash in the production of sustainable ceramic tiles

Valorisation Wastes from Sugar Mill Plant and Water Supply Treatment Process as Alternative Materials for Ecological Ceramic Floor Tiles

Valorization of thermally hydrolyzed sludge with clay for sintering of ceramic tiles

Integrated Utilization of Fly Ash and Waste Glass for Synthesis of Foam/dense Bi-Layered Insulation Ceramic Tile

Utilization of incineration bottom ash, waste marine clay, and ground granulated blast-furnace slag as a construction material

Recycling Of The Mixture Resulted From Sanitary Ware Waste, Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles

Recycling of bypass cement kiln dust in the production of eco-friendly roof tiles

Ceramic Tiles Production from Cullet and Agricultural Wastes Obtained from Wheat and Sugarcane Cultivation

Utilizing Industrial Sludge Ash in Brick Manufacturing and Quality Improvement

Preparation and characterization of ceramic foams mainly containing extracted titanium residues and silica tailings

Synthesis of a ceramic tile base based on high-alumina fly ash

Effect of phase evolution and pyroplastic formation behavior on glass-ceramic foam derived from silicomanganese slag and feldspar tailings