Abstract:Coal and gas outburst have always been one of the principal gas energy disasters in coal mines. Pre-extraction of coal-bed methane (CBM) is an effective method to reduce the outburst risk. However, during coal mining and drilling for CBM extraction, coal will inevitably undergo plastic deformation or even failure. This will result in a change in gas’s migration behavior, bringing severe challenges to coal mine gas disaster prevention and effective CBM extraction. Therefore, it was considered necessary to study the evolutionary law of permeability characteristics, and the mechanical property response of coal under engineering disturbance. Based on generalized plastic theory, the plastic strain in coal is calculated by using the non-associated flow rule. The damage variable was modified with reference to the stress–strain constitutive relationship, that was introduced into a simplified permeability model to successfully construct an original coupled damage–permeability model based on the elastoplastic mechanics in coal (D–P coupling model). The proposed model has been verified by carrying out a tri-axial compression-seepage experiment (mining simulations) under different confining pressures and a tri-axial seepage experiment (extraction simulations) under different effective stresses and under different pore pressures. The results showed that during the whole stress–strain process, the new model could well reflect the seepage behavior of CBM on whether coal permeability decreased before the yield point or increased sharply after peak failure. Coal permeability decreased with an increase of effective stress and pore pressure, and the new model corresponded well with the experimental results. Finally, the relationships between plastic strain, damage variables and mechanical properties in coal were discussed. The proposed model has provided a theoretical basis for coal mine gas disaster prevention and CBM extraction.

Coupled Model Of Gas-Solid In Coal Seams Based On Dynamic Process Of Pressure Relief And Gas Drainage

Stress–damage–flow Coupling Model and Its Application to Pressure Relief Coal Bed Methane in Deep Coal Seam

Coupling model of stress-damage-flow and its application to the investigation of instantaneous seepage mechanism for gas during unloading in coal seam with depth

A Gas-Solid-Liquid Coupling Model Of Coal Seams And The Optimization Of Gas Drainage Boreholes

Solid-gas Coupling Dynamic Model and Numerical Simulation of Coal Containing Gas

3D numerical simulation of gas drainage from boreholes based on solid-gas coupling model of coal containing gas

Fluid–Solid Coupling Model and Simulation of Gas-Bearing Coal for Energy Security and Sustainability

Numerical Simulation of Pressure Gradient of Coalbed Gas Outburst and Migration Considering Moving Boundary

Analysis of Solid-Gas Coupling Model and Simulation of Coal Containing Gas

Mathematical Modeling for Coupled Solid Elastic-Deformation and Gas Leak Flow in Multi-Coal-seams

A gas-mechanical-damage coupling model based on the TLF-SPH method and its application to gas seepage in fractured coal

A fully coupled thermal-hydrological-mechanical model for gas seepage based on binary-energy-state heat theory

Numerical simulation of boreholes along coal seam for gas drainage

Solid-Gas Coupling Model and Numerical Simulation of Coal Containing Gas Based on Comsol Multiphysic

A fluid–solid coupling model for hydraulic fracture of deep coal seam based on finite element method

Fluid-Solid Coupling Characteristics of Methane-Containing Coal during Borehole Extraction of Coalbed: Numerical Modeling and Experimental Research

Research on a dynamically coupled deformation and gas flow model applied to low-permeability coal

Numerical Simulation On Effect Of Gas Drainage In Coal Seam Under Hydraulic Fracturing

An Original Coupled Damage–Permeability Model Based on the Elastoplastic Mechanics in Coal

Hydraulic-Mechanical Coupling Model with Dual-Porosity Dual-Permeability for Anisotropy Coal Seams and Its Application in Mine Gas Extraction

Numerical Modeling of Gas Flow in Coal Using a Modified Dual-Porosity Model: A Multi-Mechanistic Approach and Finite Difference Method