Abstract:For a gas-solid-liquid coupling model of coal seams, previous permeability models basically supposed uniaxial strains as the boundary condition for coal reservoirs without considering the deformation caused by changes in humidity. The permeability model varies under different boundary conditions. According to the true triaxial stress state of coal reservoirs, a permeability model considering the effective stress, sorption and desorption, and wet strain was established. Based on the permeability model, the continuity equation of gas and water and the stress field equation were coupled. Then, the model was incorporated in the COMSOL suite to simulate gas drainage from boreholes in floor roadways passing through seams in a coal mine. By comparing with the measured gas flow on site, the model was verified as being reliable. Moreover, the spacing and layout shape of boreholes in floor roadways were simulated. To achieve the aim of eliminating regional outburst within 180 days and decreasing the number of boreholes so as to reduce the cost, the spacing and shape of boreholes were optimized. When the superimposed effect of the boreholes was not considered, the optimal spacing of boreholes was root 3r; if the superimposed effect was taken into account, the spacing could be set to within root 3r <= L <= R, where r and R represent the effective gas drainage radius and the influence radius of gas drainage, respectively. The borehole spacing could be appropriately increased when the boreholes were arranged in rhomboidal form. To achieve the same range of outburst elimination, the rhomboidal layout can decrease the number of boreholes to reduce cost, thus realizing the objective of this optimization process.

Mathematical Modeling for Coupled Solid Elastic-Deformation and Gas Leak Flow in Multi-Coal-seams

Computer Modeling Of Coupled Gas Flow In Rock Failure Process

Coupling model of stress-damage-flow and its application to the investigation of instantaneous seepage mechanism for gas during unloading in coal seam with depth

Multi-scale Fractured Coal Gas–Solid Coupling Model and Its Applications in Engineering Projects

Solid-Gas Coupling Model and Numerical Simulation of Coal Containing Gas Based on Comsol Multiphysic

A gas-mechanical-damage coupling model based on the TLF-SPH method and its application to gas seepage in fractured coal

Mathematical Model of One-Dimensional Penetration Stability Failure for Gaseous Coal

A fluid–solid coupling model for hydraulic fracture of deep coal seam based on finite element method

Numerical Simulation of Pressure Gradient of Coalbed Gas Outburst and Migration Considering Moving Boundary

Solid-gas Coupling Dynamic Model and Numerical Simulation of Coal Containing Gas

Stress–damage–flow Coupling Model and Its Application to Pressure Relief Coal Bed Methane in Deep Coal Seam

Numerical simulation of a coupled gas flow and geomechanics process in fractured coalbed methane reservoirs

Multi-Scale Modelling of Multi-Physics Flow in Coal Seams

Multi-physics Coupling Model of Coal and Coal-bed Methane Extraction in Mining Area and Its Application

Research on a dynamically coupled deformation and gas flow model applied to low-permeability coal

Coupling among Seepage-Damage-stress in Deep Mining

Numerical solution for borehole methane flow in coal seam based on a new dual-porosity model

Fluid-Solid Coupling Characteristics of Methane-Containing Coal during Borehole Extraction of Coalbed: Numerical Modeling and Experimental Research

NUMERICAL TESTS ON COUPLED GAS FLOW IN COAL AND ROCK FAILURE PROCESS

A Gas-Solid-Liquid Coupling Model Of Coal Seams And The Optimization Of Gas Drainage Boreholes

Coupled fluid-flow and geomechanics for triple-porosity/dual-permeability modeling of coalbed methane recovery