Abstract:FePO4 nanoparticles, acted directly as cathode materials in lithium ion rechargeable batteries, were synthesized by a microemulsion technique. The various grain-sized and crystal-structured FePO4 samples were obtained by sintering at different temperatures (380°C, 460°C, 550°C, 650°C) for 3h in air. The structure and morphology were investigated by means of X-ray diffraction (XRD) and field emission-scanning electron microscopy (FE-SEM); the electrochemical properties were characterized by electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and galvanostatic charge and discharge tests. Results show that FePO4 sintered at 380°C and 460°C for 3h are amorphous, and with fine sizes in the range of 10–20nm. Increasing the sintering temperature leads to an increase in grain size and makes the structure change from amorphous to trigonal. The EIS results show that the Rct value of FePO4 sintered at 460°C is smaller than that sintered at 650°C. The diffusion coefficients of lithium ion (DLi) of FePO4 sintered at 380°C, 460°C, 550°C and 650°C measured by EIS are 8.09×10−14, 1.06×10−13, 4.88×10−14 and 2.59×10−14cm2s−1, respectively. The difference in diffusivity is also confirmed by CV and the DLi values are 6.71×10−14, 8.28×10−14, 4.89×10−14 and 1.60×10−14cm2s−1, respectively. The correlations between the electrochemical performances of FePO4 and lithium ion diffusion are acquired. The charge and discharge tests show that the initial discharge specific capacity of FePO4 sintered at 460°C for 3h reaches 142.3mAhg−1 at 0.1°C. These results suggest that nanoparticles and amorphous FePO4 facilitates lithium ion diffusion during the charge/discharge cycles.

Hydrothermal Synthesis of Fe3o4 Nanoparticles and Its Application in Lithium Ion Battery

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

Fe3O4nanobelts: One-Pot and Template-Free Synthesis, Magnetic Property, and Application for Lithium Storage

Fe3O4 Submicron Spheroids As Anode Materials for Lithium-Ion Batteries with Stable and High Electrochemical Performance

Hydrothermal Synthesis of FeS 2 for Lithium Batteries

Microwave-hydrothermal Synthesis of Fe-based Materials for Lithium-Ion Batteries and Supercapacitors

One-Pot Hydrothermal Synthesis of Hollow Fe3o4 Microspheres Assembled with Nanoparticles for Lithium-Ion Battery Anodes

Hydrothermal Synthesis and Lithium Storage Properties of Fe_2O_3/Graphene Nanocomposites

Controlled Synthesis of Α-Fe2o3 Nanostructures and Their Size-Dependent Electrochemical Properties for Lithium-Ion Batteries

One-pot synthesis of uniform Fe3O4 nanocrystals encapsulated in interconnected carbon nanospheres for superior lithium storage capability

Preparation of α-Fe2O3 submicro-flowers by a hydrothermal approach and their electrochemical performance in lithium-ion batteries

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

One‐Pot Hydrothermal Synthesis of FeMoO4 Nanocubes as an Anode Material for Lithium‐Ion Batteries with Excellent Electrochemical Performance

Li Ion Diffusivity and Electrochemical Properties of FePO4 Nanoparticles Acted Directly As Cathode Materials in Lithium Ion Rechargeable Batteries

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material Via a Microemulsion Technique

A Facile Fabrication Of Fe3o4/Graphene Nanosheets For Lithium-Ion Battery

Nanostructured Iron Fluoride Derived from Fe-Based Metal-Organic Framework for Lithium Ion Battery Cathodes.

L-Serine-Assisted Synthesis of Superparamagnetic Fe3o4 Nanocubes for Lithuium Ion Batteries

Fe3O4C Open Hollow Sphere Assembled by Nanocrystals and Its Application in Lithium Ion Battery

Lysine-assisted hydrothermal synthesis of hierarchically porous Fe 2O3 microspheres as anode materials for lithium-ion batteries

Morphology-Controlled Synthesis of Fe3o4/Carbon Nanostructures for Lithium Ion Batteries