Abstract:High temperature proton exchange membrane fuel cells (HT-PEMFCs) can operate over 100 °C without humidification, which avoids the catalyst poisoning and enhances the efficiency of the power conversion. However, the classic phosphoric acid (PA) doped polybenzimidazole (PBI) still remains the challenge in the trade-off between mechanical strength and proton conductivity. The γ-(2,3-epoxypropoxy) propyltrimethoxysilane (KH560), as a crosslinking agent, is widely used to improve the mechanical properties of membranes. Although it can enhance the mechanical strength of PBI membranes, it sacrifices the hydrogen of imidazole groups, resulting in a decrease in proton conductivity. In this present work, silane-crosslinked PBI proton exchange membranes (PEMs) were synthesized by the reaction between the pyridine-bridged PBI containing different hydroxyl (-OH) content with KH560. Through comprehensive structural characterization of the polymer and model compound, it has been determined that this crosslinking method does not compromise the N–H acidic sites on the imidazole ring. The crosslinking agent KH560 provides additional hydroxyl groups to PBI and participates in the construction of hydrogen bonding networks after the ring-opening reaction. It was found that the addition of pyridine and hydroxyl groups could promote the phosphoric acid uptake, and the appropriate degree of silane crosslinking could maintain the PBI membranes with reasonable mechanical properties. Proton conductivity and HT-PEMFCs performance of the obtained crosslinked films were further enhanced with the dimensional stability, thermal stability and mechanical properties. Among them, CPyOPBI–OH–20 presented the best overall performance, exhibiting the highest proton conductivity of 0.095 S cm−1 and the maximum power density of 767 mW cm−2 at 180 °C under the anhydrous condition, which was 4.2 times that of OPBI (182 mW cm−2).

High Proton-Conducting Monolithic Phosphosilicate Glass Membranes

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

HT-PEMs based on carbazole grafted polybenzimidazole with high proton conductivity and excellent tolerance of phosphoric acid

Preparation and properties of SiO2/PEG/PWA hybrid proton exchange membranes

A phosphonated phenol-formaldehyde-based high-temperature proton exchange membrane with intrinsic protonic conductors and proton transport channels

Phosphonic Acid Functionalized Silicas for Intermediate Temperature Proton Conduction

Sulfonated Polyphosphazene-Blended Self-Cross-Linked Polybenzimidazole-Based High-Temperature Proton Exchange Membranes: High Efficiency in Proton Transport at Low Humidity

Constructing high temperature proton exchange membranes with sandwich structure based on graphene oxide nanosheets and electrospinning polyvinyl chloride nanofibers

Fabrication of -SO3H-functionalized polyphosphazene-reinforced proton conductive matrix-mixed membranes

Porous Silica Nanospheres Functionalized with Phosphonic Acid as Intermediate-Temperature Proton Conductors

Anhydrous proton conductor based on composites of PEO and ATMP

Silane-crosslinked polybenzimidazole with different hydroxyl content for high-temperature proton exchange membrane

Proton transfer efficiency enhanced over wide relative humidity: Etidronic acid-modified polyphosphazenes cross-linked polybenzimidazoles membranes

Polyoxometalate-Cross-Linked Proton Exchange Membranes with Post-Assembled Nanostructures for High-Temperature Proton Conduction

Construction of High-Performance, High-Temperature Proton Exchange Membranes through Incorporating SiO2 Nanoparticles into Novel Cross-linked Polybenzimidazole Networks

Quaternary ammonium-biphosphate ion-pair based copolymers with continuous H+ transport channels for high-temperature proton exchange membrane

Efficient and stable proton conduction achieved by accommodation of the membrane-wide cross-linking and branching strategies