Abstract:Recently, constructing proton transport channels has been considered an effective method to improve proton conductivity of high-temperature proton exchange membranes (PEM) with low phosphoric acid (PA)-doping levels. To construct proton transport channels, a metal–organic framework (MOF) is introduced into a polymer matrix. However, the MOF has poor compatibility with the polymer matrix as an inorganic substance. In this study, organic triazole-grafted poly(vinylbenzyl chloride) is synthesized and introduced into a cross-linked OPBI membrane to construct proton transport channels. Scanning electron microscopy (SEM) images show a homogeneous microstructure. Furthermore, proton transport channels are constructed in the membrane by introducing numerous triazole groups. The cross-linked OPBI has twice the proton conductivity of the linear OPBI, even with a low PA-doping level. All cross-linked membranes with a triazole group outperform OPBI membranes in terms of mechanical properties. The maximum power density of a single-cell test reaches 563 mW cm–2 at 160 °C under H2/O2, and it can be maintained for 500 h under a constant load of current discharge without manifest voltage degradation. These impressive results indicate that the moderately cross-linked membrane with triazole groups is one of the potential materials for PEM applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02173.Additional information, including materials and reagents; characterization methods; synthetic route; 1H NMR spectra; and gel fraction (PDF)This article has not yet been cited by other publications.

A phosphonated phenol-formaldehyde-based high-temperature proton exchange membrane with intrinsic protonic conductors and proton transport channels

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Ethyl Phosphoric Acid Grafted Amino-Modified Polybenzimidazole with Improved Long-Term Stability for High-Temperature Proton Exchange Membrane Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Sulfonated Polyaryletherketone with Pendant Benzimidazole Groups for Proton Exchange Membranes

Sulfonated Polyphosphazene-Blended Self-Cross-Linked Polybenzimidazole-Based High-Temperature Proton Exchange Membranes: High Efficiency in Proton Transport at Low Humidity

Synthesis and characterization of phosphonated polybenzimidazole membranes with improved proton conductivity for high-temperature proton exchange membrane applications

Constructing stable continuous proton transport channels by in-situ preparation of covalent triazine-based frameworks in phosphoric acid-doped polybenzimidazole for high-temperature proton exchange membranes

Anhydrous proton conductor based on composites of PEO and ATMP

Imidazole and triazine framed porous aromatic framework with rich proton transport sites for high performance high-temperature proton exchange membranes

Constructing High-Performance Proton Transport Channels in High-Temperature Proton Exchange Membranes by Introducing Triazole Groups

Alkali-free quaternized polybenzimidazole membranes with high phosphoric acid retention ability for high temperature proton exchange membrane fuel cells

Proton transfer efficiency enhanced over wide relative humidity: Etidronic acid-modified polyphosphazenes cross-linked polybenzimidazoles membranes

Preparation of high temperature proton exchange membrane through covalent organic framework doped polyvinylidene fluoride nanofibers

High-temperature water-free proton conducting membranes based on poly(arylene ether ketone) containing pendant quaternary ammonium groups with enhanced proton transport

Novel High Temperature Proton Exchange Membranes Based on Functionalized Poly(arylene Dimethylamino Benzene) Polymers

Enhancement of comprehensive performance of high-temperature and low-humidity proton exchange membranes: Crosslinking of trifunctional proton conductor with branched polybenzimidazole

Quaternary ammonium-biphosphate ion-pair based copolymers with continuous H+ transport channels for high-temperature proton exchange membrane

High Proton-Conducting Monolithic Phosphosilicate Glass Membranes

Preparation and molecular simulation of grafted polybenzimidazoles containing benzimidazole type side pendant as high-temperature proton exchange membranes