Abstract:The vertical and horizontal bending of micro-beams subjected to axial compressive and transverse concentrated loadings is a common lateral deformation in micro-/nano-engineering that plays a significant role in the design and optimization of micro-/nano-devices. The present study aims to investigate it using the nonlocal theory. For this purpose, the simplified mathematical model is developed, and the nonlocal differential constitutive equation is applied. Since the mechanical properties of micro-beams are different from those of macro-beams, the non-classical nonlocal bending moment is introduced to improve the classical bending formulation in order to adapt to the vertical and horizontal bending of micro-beams. The effects of the external load, external size, structural stiffness, and internal characteristic scale on the vertical and horizontal bending deformation including the midpoint deflection and critical compression are presented. The present analytical model and results are validated by the finite element method. It is shown that the critical compression decreases with increasing the internal characteristic scale. Moreover, the midpoint deflection varies remarkably with respect to the axial and transverse loadings, structural stiffness, internal characteristic scale, and external size. An obvious nonlocal scale effect is found, in which the internal characteristic scale cannot be neglected compared with the external size. Besides, a threshold value of the structural stiffness is determined, and the connotation of the nonlocal interaction requires that the structural stiffness shall not be lower than that threshold. A mutual restriction between structural stiffness and external loadings is observed in the vertical and horizontal bending. In particular, it is further proved that the classical continuum mechanics can not be used in micro-/nano-scaled mechanics through a strange phenomenon that is contrary to mechanical common sense in the calculation example. The study is expected to be beneficial to the design and application of micro-beams subjected to the vertical and horizontal bending.

Atomic Simulation of the Bending Deformation of A Single-Crystal Simply Supported Nano-Beam

Modified Beam Theories for Bending Properties of Nanowires Considering Surface/Intrinsic Effects and Axial Extension Effect

Atomistic Numerical Investigation of Single-crystal Copper Nanowire with Surface Defects

Revealing the Mechanical Bending Mechanisms of Single-Crystalline Rutile TiO2 Nanowires Near Room Temperature: Implications for Nanostructured Semiconductors

Bending-induced Deformation Twinning in Body-Centered Cubic Tungsten Nanowires

In Situ Observation of High Bending Strain Recoverability in Au Nanowires

Atomistic perspective on in situ nanomechanics

Theoretical and numerical investigation of bending properties of Cu nanowires

Recent Findings on the Mechanical Responses of Nanostructures to Extreme Loading Conditions

Atomic-Scale-Deformation-Dynamics (asds) of Nanowires and Nanofilms

Orientation- and Microstructure-Dependent Deformation in Metal Nanowires under Bending

Investigation of the Bending Behavior in Silicon Nanowires: A Nanomechanical Modeling Perspective

On Nonlocal Vertical and Horizontal Bending of a Micro-Beam

Atomistic Mechanisms of Ultralarge Bending Deformation of Single-Crystalline TiO2–B Nanowires

Atomic mechanisms governing the elastic limit and the incipient plasticity of bending Si nanowires.

Comments on Nonlocal Effects in Nano-Cantilever Beams

Nonlinear deformation analysis of magneto-electro-elastic nanobeams resting on elastic foundation by using nonlocal modified couple stress theory

On nonlocal mechanics of curved elastic beams

Molecular Dynamics Simulations of Orientation Effects During Tension, Compression, and Bending Deformations of Magnesium Nanocrystals

An dynamical evaluation of size-dependent weakened nano-beam based on the nonlocal strain gradient theory