Abstract:The vertical and horizontal bending of micro-beams subjected to axial compressive and transverse concentrated loadings is a common lateral deformation in micro-/nano-engineering that plays a significant role in the design and optimization of micro-/nano-devices. The present study aims to investigate it using the nonlocal theory. For this purpose, the simplified mathematical model is developed, and the nonlocal differential constitutive equation is applied. Since the mechanical properties of micro-beams are different from those of macro-beams, the non-classical nonlocal bending moment is introduced to improve the classical bending formulation in order to adapt to the vertical and horizontal bending of micro-beams. The effects of the external load, external size, structural stiffness, and internal characteristic scale on the vertical and horizontal bending deformation including the midpoint deflection and critical compression are presented. The present analytical model and results are validated by the finite element method. It is shown that the critical compression decreases with increasing the internal characteristic scale. Moreover, the midpoint deflection varies remarkably with respect to the axial and transverse loadings, structural stiffness, internal characteristic scale, and external size. An obvious nonlocal scale effect is found, in which the internal characteristic scale cannot be neglected compared with the external size. Besides, a threshold value of the structural stiffness is determined, and the connotation of the nonlocal interaction requires that the structural stiffness shall not be lower than that threshold. A mutual restriction between structural stiffness and external loadings is observed in the vertical and horizontal bending. In particular, it is further proved that the classical continuum mechanics can not be used in micro-/nano-scaled mechanics through a strange phenomenon that is contrary to mechanical common sense in the calculation example. The study is expected to be beneficial to the design and application of micro-beams subjected to the vertical and horizontal bending.

On nonlocal mechanics of curved elastic beams

Modelling issues and advances in nonlocal beams mechanics

Nonlocal strain gradient exact solutions for functionally graded inflected nano-beams

Variationally consistent dynamics of nonlocal gradient elastic beams

Nonlocal strain gradient torsion of elastic beams: variational formulation and constitutive boundary conditions

Comments on Nonlocal Effects in Nano-Cantilever Beams

Dynamic behavior of nanobeams under axial loads: Integral elasticity modeling and size-dependent eigenfrequencies assessment

Nonlocal strain gradient theory for bending, buckling, and vibration of viscoelastic functionally graded curved nanobeam embedded in an elastic medium

Nonlocal nonlinear higher-order finite element model for static bending of curved nanobeams including graphene platelets reinforcement

Exact Solutions of Bending Deflections for Nano-Beams and Nano-Plates Based on Nonlocal Elasticity Theory

On Nonlocal Vertical and Horizontal Bending of a Micro-Beam

Stress-driven two-phase integral elasticity for torsion of nano-beams

Deep Postbuckling and Nonlinear Bending Behaviors of Nanobeams with Nonlocal and Strain Gradient Effects

On the mechanics of FG nanobeams: A review with numerical analysis

On wave propagation in nanobeams

Vibrational Responses of Micro/Nanoscale Beams: Size-Dependent Nonlocal Model Analysis and Comparisons

NONLOCAL ELASTICITY THEORIES

On the Role of Nonlocal Strain Gradient Elasticity in Nonlinear Buckling of FG Porous Reinforced Curved Nanobeams Having Different Degrees of Curvature

Vibration Analysis of Axially Compressed Nanobeams and Its Critical Pressure Using A New Non Local Stress Theory

On torsion of nonlocal Lam strain gradient FG elastic beams

Stability analysis of arbitrary restrained nanobeam embedded in an elastic medium via nonlocal strain gradient theory