The Existing State of Enhanced Oil Recovery by Utilizing Carbon Dioxide

GU Li-bing,LI Zhi-ping,OU Jin

DOI: https://doi.org/10.3969/j.issn.1004-4051.2007.10.020

2007-01-01

Abstract:Enhanced oil recovery by utilizing carbon dioxide has been one of the three methods of developing oil(heating flooding,polymer flooding,CO2 flooding).This article analysed mechanism,development mode and problems of CO2 flooding,and proposed development tendency.

What problem does this paper attempt to address?

Research on Evaluation Methodologies of Carbon Dioxide Flooding Technology and Current Applications

陈健,彭春洋,湛祥惠,原晓珠

DOI: https://doi.org/10.3969/j.issn.1673-5285.2011.08.001

2011-01-01

Abstract:Carbon dioxide flooding is an effective way of EOR,and it＇s playing a more and more important role in recovering oil and gas.This paper states the mechanism of carbon dioxide flooding,gives a presentation of its driving methods correspondingly,highlights in summing up the ways that test and evaluate parameters of carbon dioxide flooding inside laboratory currently surveys the carbon dioxide flooding technology application situation domestic and abroad suggests oilfield to cooperate with surrounding factories to get enough gas resources,makes a rational use of industrial waste gas and studies on CO_2 capturing and pilot tests of buried flooding.
Carbon Dioxide Flooding Technology for Ultra-Low Permeability Reservoirs to Greatly Enhance oil Recovery

Yinlong Gu

DOI: https://doi.org/10.1088/1755-1315/859/1/012066

2021-09-01

IOP Conference Series: Earth and Environmental Science

Abstract:Low-permeability reservoir pressure is difficult to maintain, CO2 miscible flooding is difficult to achieve for low-permeability reservoirs, and near-miscible flooding is a promising technology for enhancing oil recovery for low-permeability reservoirs. Aiming at the complex geological and development characteristics of China's continental low-permeability reservoirs, the system elaborated Sinopec's CO2 flooding theory, reservoir engineering optimization design, injection and production engineering and anti-corrosion technology, production CO2 recovery and utilization, and other technical developments and field tests. Happening. Based on the research of CO2 flooding mechanism, this paper takes a well-known oil field H 28 reservoir as the target, and conducts an indoor evaluation of CO2 flooding methods through core physical simulation experiments. The pilot test of CO2 flooding field shows that CO2 flooding can significantly increase the productivity of ultra-low permeability oil wells, improve the development effect of oil wells, and meet the needs of ultra-low permeability reservoir development, and has broad application prospects.
Laboratory Evaluation of CO2 Flooding: A Strategic Technology for Sustainable Development of Oil Companies

Hao Kang,Jian Gao,Gang Hui

DOI: https://doi.org/10.13052/spee1048-5236.4212

2022-12-28

Strategic Planning for Energy and the Environment

Abstract:With the development of humankind, energy demand and climate change have both faced with serious situations now. In order to find new technologies for solving these problems, long core displacement experiment concerning CO2 flooding is conducted with 11 different core samples from N formation in M oilfield. Results show that oil production rate will be greatly improved and the oil recovery can reach nearly 25% by the CO2 huff and puff process using 3 rounds which is much higher than the real recovery factor in M oilfield. Considering the enhanced oil recovery and carbon storage effects generated by this technique at the same time, CO2 flooding is definitely a promising technique with great potential both for sustainable development of oil companies and humankind. For large scale field application, it is suggested that oil companies and governments should provide corresponding support policy concerning further study of this technology. Particularly, further studies should focus on the application of CO2 flooding with other EOR technologies, optimal CO2 injection mode, optimal CO2 injection rate, optimal CO2 injection pressure and so on.
Experimental investigation of carbon dioxide flooding in heavy oil reservoirs for enhanced oil recovery

Lan Wang,Qianhui Zhao,Zhiping Li

DOI: https://doi.org/10.1016/j.egyr.2022.08.008

IF: 5.2

2022-11-01

Energy Reports

Abstract:With the attention paid to greenhouse gas emission reduction all over the world, CO2 capture, utilization and storage technology has developed rapidly. Predecessors have done a lot of work on the effect of CO2 on properties of the oil, the changes of parameters after CO2 injection are different. Through PVT, slim tube test and phase state simulation, this work studied the influence law of CO2 injection on the properties of heavy oil in offshore reservoirs in eastern China. It defines the adaptability and oil displacement mechanism of CO2 flooding in the reservoirs. In this work, 12 oil displacement experiments were carried out to quantify the effect of injection sequence, slug size, gas injection rate, and soaking time on oil recovery in the hydrogen carbon reservoir. These experimental results have indicated the influence of different factors on oil displacement effect. It provides strong evidence for the efficient development and enhanced oil recovery of the oilfield. The results indicate that the gas–water alternative injection is better than continuous water flooding or continuous CO2 flooding by improving the ultimate recovery at 8.9% and 12.7% respectively. A larger CO2 slug is beneficial to improve the ultimate oil recovery and the injection rate of CO2 slightly affects the ultimate oil recovery factor. Longer soaking time can improve the ultimate recovery either. The ultimate recovery increases rapidly with the soaking time when it less than 24 h, but the ultimate oil recovery hardly increases when the soaking time is longer than 24 h.

energy & fuels
Inspirations from Field-Reservoir CO2 Flooding with Different Miscible Degrees under Cross-Scale Oil Reservoir Conditions

Lijun Zhang,Xianhong Tan,Xiaofeng Tian,Yujia Jiao,Wenbo Zhang,Xiaohan Shu,Borui Li,Xiliang Liu,Hao Chen

DOI: https://doi.org/10.1021/acsomega.3c08433

IF: 4.1

2024-03-21

ACS Omega

Abstract:In recent years, CO2 flooding has become one of the main enhanced oil recovery (EOR) methods, especially for tight formations in different oilfields around the world. Most of the CO2 flooding projects carried out in the world are based on miscible flooding, however, this technique is less effective in China because of the depth of the reservoirs and the heavy components of the crude oil. Near-miscible flooding and immiscible flooding have also been gradually applied to China's domestic oil fields, and have achieved certain oil increase effects, but there are still some challenges such as gas channeling, corrosion, and solid phase deposition in the process of CO2 flooding. In this paper, through a detailed review of recent domestic and foreign cases of enhanced oil recovery, the effects of development methods of low permeability and ultralow permeability reservoirs under different miscible degrees are analyzed, and the solutions to some of the existing problems in field tests and experience are systematically summarized. According to the results of field tests, both miscible flooding and near-miscible flooding have similar effects and can achieve better recovery increment, with a long effect period and slow gas breakthrough speed. In addition, the problems of gas channeling, corrosion, and solid phase deposition occurring in the process of CO2 flooding are analyzed, and solutions such as a change in injection methods and coatings are put forward, which effectively promote the development of CO2 flooding technology. Those suggestions are of great significance for improving the oil recovery rate of unconventional oil reservoirs, ensuring the national energy supply, and low-carbon emissions reduction in China.
Study of Supercritical State Characteristics of Miscible CO2 Used in the Flooding Process

Yu Zhang,Weifeng Lyu,Ke Zhang,Dongbo He,Ao Li,Yaoze Cheng,Jiahao Gao

DOI: https://doi.org/10.3390/en16186693

IF: 3.2

2023-09-19

Energies

Abstract:Carbon dioxide flooding is a strategic replacement technology for greatly enhancing oil recovery in low-permeability oilfields, which includes social benefits resulting from carbon emission reduction and economic benefits owing to the improvement of oil recovery. Therefore, it is of great significance to develop and apply the technology of CO2 flooding and storage in the petroleum industry. In reservoir conditions, CO2 is usually under a supercritical state, presenting both low viscosity and high diffusivity of a gaseous state and high density of a liquid state. The special phase behavior of CO2 directly affects its extraction capacity, resulting in the change of miscible behavior between CO2 and crude oil. In this paper, the ultra-high-pressure–high-temperature pressure–volume–temperature (PVT) system was used to evaluate the phase characteristics of CO2 during the process of reservoir development. The phase behaviors of the CO2/CH4/N2 crude oil system were compared and analyzed. Moreover, the matching mechanism between supercritical CO2 characteristics and oil–gas system miscibility was investigated and defined. This work deepened the understanding of the phase characteristics of CO2 in the process of miscible flooding, providing both theoretical guidance for the application of CO2 injection on oilfields and the essential scientific basis for the implementation of CCUS-EOR technology.

energy & fuels
Mechanism of CO2 enhanced oil recovery in shale reservoirs

Hai-Bo Li,Zheng-Ming Yang,Rui-Shan Li,Ti-Yao Zhou,He-Kun Guo,Xue-Wei Liu,Yi-Xin Dai,Zhen-Guo Hu,Huan Meng

DOI: https://doi.org/10.1016/j.petsci.2021.09.040

IF: 4.757

2021-12-01

Petroleum Science

Abstract:Combined with NMR, core experiment, slim-tube tests, nano-CT and oil composition analysis, the mechanism of CO2 enhanced oil recovery had been studied. CO2 flooding under supercritical state could achieve higher oil recovery. In the process of crude oil displaced by supercritical CO2, the average oil recovery was 46.98% at low displacement pressures and 73.35% at high displacement pressures. The permeability of cores after CO2 flooding was only 28%–64% of those before flooding. As to the expelled oil, the contents of asphaltenes and non-hydrocarbons decreased, and saturated hydrocarbons of above C25 were absent in some samples, indicating that they had been retained in cores as demonstrated by CT and NMR experiments. In slim-tube tests, the heavy components of oil were expelled when the pressure increased to 30 MPa. There was a reasonable bottom hole pressure (BHP) below which the heavy components driven out from the far-well zone would deposit in the near-well zone, and when the pressure was too high, the nonhydrocarbon detention may cause block. The smaller throat and worse physical properties the porous media had, the higher displacement pressure would be required to achieve a good oil displacement efficiency. The increase in displacement pressure or time of interaction between oil and CO2 could effectively enhance oil recovery.

energy & fuels,engineering, petroleum
Experimental Study on Carbon Dioxide Flooding Technology in the Lunnan Oilfield, Tarim Basin

Zangyuan Wu,Qihong Feng,Yongliang Tang,Daiyu Zhou,Liming Lian

DOI: https://doi.org/10.3390/en17020386

IF: 3.2

2024-01-13

Energies

Abstract:The Lunnan Oilfield in the Tarim Basin is known for its abundant oil and gas resources. However, the marine clastic reservoir in this oilfield poses challenges due to its tightness and difficulty in development using conventional water drive methods. To improve the recovery rate, this study focuses on the application of carbon dioxide flooding after a water drive. Indoor experiments were conducted on the formation fluids of the Lunnan Oil Formation, specifically investigating gas injection expansion, thin tube, long core displacement, oil and gas phase permeability, and solubility. By injecting carbon dioxide under the current formation pressure, the study explores the impact of varying amounts of carbon dioxide on crude oil extraction capacity, high-pressure physical parameters of crude oil, and phase characteristics of formation fluids. Additionally, the maximum dissolution capacity of carbon dioxide in formation water is analyzed under different formation temperatures and pressures. The research findings indicate that the crude oil extracted from the Lunnan Oilfield exhibits specific characteristics such as low viscosity, low freezing point, low-medium sulfur content, high wax content, and medium colloid asphaltene. The measured density of carbon dioxide under the conditions of the oil group is 0.74 g/cm3, which closely matches the density of crude oil. Additionally, the viscosity of carbon dioxide is 0.0681 mPa·s, making it well-suited for carbon dioxide flooding. With an increase in the amount of injected carbon dioxide, the saturation pressure and gas-oil ratio of the crude oil also increase. As the pressure rises, carbon dioxide dissolves rapidly into the crude oil, resulting in a gradual increase in the gas-oil ratio, expansion coefficient, and saturation pressure. As the displacement pressure decreases, the degree of carbon dioxide displacement initially decreases slowly, followed by a rapid decrease. Moreover, an increase in the injection rate of carbon dioxide pore volume leads to a rapid initial improvement in oil-displacement efficiency, followed by a slower increase. Simultaneously, the gas-oil ratio exhibits a slow increase initially, followed by a rapid rise. Furthermore, as the displacement pressure increases, the solubility of carbon dioxide in water demonstrates a linear increase. These research findings provide valuable theoretical data to support the use of carbon dioxide flooding techniques for enhancing oil recovery.

energy & fuels
Investigation on Displacement Efficiency and Enhance Oil Recovery Performance of CO 2 and CO 2 -chemical Additive Composite System Flooding Using LBM Simulation

Lei Li,Dian Zhang,Zhengdong Lei,Xue Zhang,Qiuheng Xie,Yuliang Su,Yingying Qin,Tian Zhang

DOI: https://doi.org/10.1016/j.jiec.2023.10.063

IF: 6.76

2023-11-05

Journal of Industrial and Engineering Chemistry

Abstract:CO 2 flooding is a promising EOR method. Chemical additives reduce oil viscosity and CO 2 -oil interfacial tension. In this study, we propose a multiphase and multi-component model based on the LBM to examine the effectiveness of CO 2 flooding and identify the factors that influence its performance. Additionally, we present a novel approach for simulating CO 2 -chemical additive composite system (CCAS) flooding by modifying fluid interaction parameters and reducing oil viscosity when exposed to chemicals. A comparison was conducted between the CO 2 flooding approach and the CO 2 -chemical additive compound systems. The results show that the force between fluid molecules has a significant impact on interfacial tension and miscibility, affecting the displacement process. The viscosity and injection speed of the displaced fluid play a crucial role in determining the initial momentum and CO 2 displacement performance. Additionally, reservoir rock morphology has an impact on the velocity of fluid molecules, and affects the displacement efficiency. The CCAS flooding has the potential to increase oil recovery by 15% compared to using CO 2 flooding alone. Optimizing additive concentration, injection timing, and injection rate can further improve oil displacement efficiency by 5%-10%. Valuable theoretical guidance for applying CO 2 chemical additives is provided by these research findings.

engineering, chemical,chemistry, multidisciplinary
The Three-Dimensional Heterogeneous Simulation Study of CO2 Flooding in Low-Permeability Reservoirs

Yang Liu,Fajian Nie,Bin Zhang,Tenglong Liu,Yi Hong

DOI: https://doi.org/10.3390/pr12091843

IF: 3.5

2024-09-01

Processes

Abstract:CO2 flooding can significantly enhance oil recovery. However, the research on the distribution of remaining oil after CO2-oil and the method of further enhancing oil recovery still needs to be strengthened. Traditional studies on the mechanisms of CO2 flooding to enhance oil recovery mainly focus on core displacement experiments. In order to better simulate the actual field conditions, we conducted a three-dimensional heterogeneous physical simulation experiment. Compared to conventional core displacement experiments, three-dimensional heterogeneous physical model displacement experiments align more closely with actual conditions at the oilfield site. This study establishes a large-scale indoor three-dimensional high-temperature high-pressure displacement physical model and employs three different oil displacement methods: CO2–Water alternating flooding, CO2–Water alternating combined with foam flooding, and CO2–Water alternating combined with imbibition agent flooding. The study investigates the distribution of residual oil and recovery in heterogeneous reservoirs under different injection and production methods. We proposed three experimental schemes to see which one would have better effects in the oilfield. Experimental results show that CO2–Water alternating flooding combined with different chemical flooding agents improves oil recovery. The CO2–Water alternating combined with an imbibition enhancer flooding method achieves the best results, with recovery increased by 16.3% and 1.7% compared to CO2–Water alternating flooding and CO2–Water alternating combined with foam flooding, respectively. The imbibition agent significantly improves wettability and spontaneous imbibition by reducing interfacial tension and resolving the issue of CO2 failing to enter small pores under low differential pressure conditions, thereby maximizing recovery and displacement efficiency.

engineering, chemical
Experimental study on CO2 flooding characteristics in low-permeability fractured reservoirs

Tong Zhang,Guoliang Zhou,Ming Tang,Jun Wu,Xin Yang,Ming Zhu,Zhizheng Xie,Tong ZhangGuoliang ZhouMing TangJun WuXin YangMing ZhuZhizheng Xiea School of Safety Science and Engineering,State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines,School of Mining Engineering,Anhui University of Science and Technology,Huainan,Chinab Institute of Energy,Hefei Comprehensive National Science Center,Hefei,ChinaTong Zhang,male,born in 1990,Associate professor,mainly engaged in the coal and co-associated resource exploitation.Guoliang Zhou,male,born in 1999,Master candidate,mainly engaged in the CO2 enhanced oil recovery technology.Ming Tang,male,born in 1997,PhD candidate,mainly engaged in the CO2 enhanced oil recovery and carbon capture and storage.Jun Wu,male,born in 1999,Master candidate,mainly engaged in the prevention and control of coal mine water disasters.Xin Yang,male,born in 1997,PhD candidate,mainly engaged in uranium mining extractionMing Zhu,female,born in 1999,Master candidate,mainly engaged in the CO2 enhanced oil recovery technology.Zhizheng Xie,male,born in 1999,Master candidate,mainly engaged in the hydraulic fracturing technology.

DOI: https://doi.org/10.1080/15567036.2023.2263419

2023-09-30

Energy Sources Part A Recovery Utilization and Environmental Effects

Abstract:CO 2 flooding in oil reservoir is a complex process, which includes fluid flow in fractured sandstone and interaction of CO 2 and displaced oil. In order to thoroughly understand the CO2 flooding characteristics in low-permeability fractured reservoirs, a series of CO2 flooding experiments were conducted based on the multi-field coupling experimental system. Considering the difference of the fractured cores, pore cores and pore-fracture model, the effect of fracture, injection pressure, CO 2 phase, and heterogeneity of horizontal composite on the CO 2 flooding were analyzed. The results show that the oil recovery of fractured core was 46.96%, 7.13% higher than that of pore core, and there was no relatively stable gas-oil ratio (GOR) stage. For the pore-fracture model, the final recovery of two models increased from 49.45% to 45.86% at 2 MPa to 78.83% and 77.35% at 8 MPa, and the pore core was the main contributor to enhance oil recovery. The supercritical CO 2 (sc-CO 2 ) enhanced the oil recovery in post-gas breakthrough state, which accounted for final recovery 65.02%. Compared with the vertical layered heterogeneity, the horizontal composite heterogeneity had less influence on the final oil recovery, with differences of below 2%, and the highest CO 2 utilization rate was occurred at the permeability model of Low-High-Low. The work provides insight on oil recovery improvement of CO 2 flooding in low-permeability fractured reservoirs.

energy & fuels,engineering, chemical
A study on the fuzzy evaluation system of carbon dioxide flooding technology

Yu Lu,Rui Liu,Kexin Wang,Yongqiang Tang,Yue Cao

DOI: https://doi.org/10.1002/ese3.844

2020-12-25

Abstract:The research and application of carbon dioxide (CO2) flooding to improve enhanced oil recovery (EOR) technology has been carried out vigorously all over the world, because it not only helps meet the needs of oilfield development but also solve the problem of carbon sequestration. A comprehensive evaluation of the application of CO2 flooding technology is necessary. In this paper, the maximum membership degree method is used to construct a comprehensive evaluation model to evaluate the CO2 gas injection effect of the P1‐1 well group in the P city reservoir to verify the development effect of CO2 flooding. The factors that affect the effect of CO2 flooding include technology, management, and economic benefits. The final evaluation index system is obtained by decomposing the evaluation factors in the effect of CO2 flooding in the waterdrive petroleum reservoir and combining the relevant literature. The analytic hierarchy process (AHP) method is used to weight CO2 injection evaluation factors in the P1‐1 well group, and the results show that the CO2 flooding development effect is excellent; it is better in terms of the management and economic effect, but the score is not high.

energy & fuels
Application of CO2 miscible flooding in ultra-low permeability beach-bar sand reservoir

Sen Yang,Yangmengzhe Xu,Zhiwei Huang,Qunshuang Zhang,Ting Liu,Xuelei Li

DOI: https://doi.org/10.3389/feart.2022.970719

IF: 2.9

2022-08-16

Frontiers in Earth Science

Abstract:The beach-bar sand reservoir of the Sha 4 Member of the Shahejie Formation in the Dongying Sag is the main oil-bearing formation in this area. In recent years, its proven reserves have been getting lower and lower, and the poor petrophysical properties of the reservoir have made water injection development difficult. In turn, it results in a rapid decline in elastic development productivity and low oil recovery. In this study, the experimental evaluation and numerical simulation research on the adaptability of CO 2 flooding in beach-bar sand reservoirs are carried out on the basis of fully investigating the successful examples of CO 2 flooding conducted by the previous. According to the geological characteristics of the reservoir in the CL area of the Dongying Sag, the reasonable reservoir engineering parameters and surface injection procedures for the CO 2 flooding have been formulated. Experiments show that after the completion of water flooding, the recovery factor of the CO 2 continuous flooding is 85.64%. It proves that the recovery factor of the CO 2 flooding is higher than that of the water flooding. Field tests have shown that CO 2 molecules in beach-bar sand reservoirs behave in a supercritical state underground, which is easier to being injected into the reservoir than water. In addition, the displacement distance of the CO 2 is obviously larger than that of the water injection development. The gas-oil ratio variation of different flooding types is different, and CO 2 flooding can effectively increase the formation energy, and improve the oil recovery and economic benefits of this type of reservoir.

geosciences, multidisciplinary
Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Abdulla Alhosani,Qingyang Lin,Alessio Scanziani,Edward Andrews,Kaiqiang Zhang,Branko Bijeljic,Martin J. Blunt

DOI: https://doi.org/10.1016/j.ijggc.2020.103232

IF: 4.4

2021-01-01

International Journal of Greenhouse Gas Control

Abstract:Carbon dioxide storage combined with enhanced oil recovery (CCS-EOR) is an important approach for reducing greenhouse gas emissions. We use pore-scale imaging to help understand CO2 storage and oil recovery during CCS-EOR at immiscible and near-miscible CO2 injection conditions. We study in situ immiscible CO2 flooding in an oil-wet reservoir rock at elevated temperature and pressure using X-ray micro-tomography. We observe the predicted, but hitherto unreported, three-phase wettability order in strongly oil-wet rocks, where water occupies the largest pores, oil the smallest, while CO2 occupies pores of intermediate size. We investigate the pore occupancy, existence of CO2 layers, recovery and CO2 trapping in the oil-wet rock at immiscible conditions and compare to the results obtained on the same rock type under slightly more weakly oil-wet near-miscible conditions, with the same wettability order. CO2 spreads in connected layers at near-miscible conditions, while it exists as disconnected ganglia in medium-sized pores at immiscible conditions. Hence, capillary trapping of CO2 by oil occurs at immiscible but not at near-miscible conditions. Moreover, capillary trapping of CO2 by water is not possible in both cases since CO2 is more wetting to the rock than water. The oil recovery by CO2 injection alone is reduced at immiscible conditions compared to near-miscible conditions, where low gas-oil capillary pressure improves microscopic displacement efficiency. Based on these results, to maximize the amount of oil recovered and CO2 stored at immiscible conditions, a water-alternating-gas injection strategy is suggested, while a strategy of continuous CO2 injection is recommended at near-miscible conditions.
Enhanced Oil Recovery through Carbon Dioxide Injection: A Compositional Simulation Approach

Tamanna Zafrin Orin,Md Tauhidur Rahman,Mohammad Amirul Islam,K. M. Haidarul Alam,A.S.M. Mannafi,Khairul Habib

DOI: https://doi.org/10.37934/araset.49.1.149160

2024-07-28

Journal of Advanced Research in Applied Sciences and Engineering Technology

Abstract:Primary recovery techniques of hydrocarbons are insufficient to meet the ever-growing energy demand. This fact encourages researchers to establish tertiary hydrocarbon extraction techniques to increase production and meet the energy demand. The implementation of CO2 flooding has been widely regarded as a highly favourable approach for enhancing the recovery of both light and heavy oil resources. The rate of CO2 injection must be consistent so that viscosity decreases, and medium crude oil mobility is increased in accordance with production requirements. In this research, the compositional simulation model for CO2 flooding has been developed using Eclipse 2010.1 software with Lorentz-Bray-Clark correlation for enhanced oil recovery by reducing viscosity with constant CO2 injection. The compositional reservoir simulated model was executed from January 1, 2027 to January 1, 2050. From January 1, 2027 to January 1, 2048, the oil production rate remained constant. The concentration of CO2 in the oil phase has exhibited a notable increase, rising from 27.25% to 58.658% over the course of the twenty-three-year simulation period. This observation indicates that the oil phase has experienced a greater dissolution of CO2. Consequently, there has been a reduction in the viscosity of the reservoir oil, with a decrease from 0.126 centipoise (cp) to 0.088 cp, representing a 69.84 percent decline. Additionally, there has been an increase in the mobility of the reservoir oil. Furthermore, the enhanced oil recovery technique successfully achieved the recovery of 35.77 million stock tank barrels per day of medium crude oil. Finally, CO2 flooding reduces the amount of CO2 in nature, which is extremely significant from an environmental standpoint.
Stimulation and Sequestration Mechanism of CO 2 Waterless Fracturing for Continental Tight Oil Reservoirs

Jiaping Tao,Siwei Meng,Xu Jin,Jianguo Xu,Qinghai Yang,Xiaoqi Wang,He Liu,Bo Peng

DOI: https://doi.org/10.1021/acsomega.1c01059

IF: 4.1

2021-08-04

ACS Omega

Abstract:CO2 fracturing is a promising technology for oil field development in tight, continental deposits, with potential advantages of enhanced oil recovery (EOR), CO2 sequestration, and water conservation. Compared with CO2-EOR techniques, such as CO2 huff and puff and CO2 flooding, CO2 can interact with reservoir rock and fluid under higher pressure conditions during fracturing, resulting in CO2 stimulation and sequestration effects that differ from those that occur during conventional CO2-EOR. In this paper, the CO2 interactions between CO2 and reservoirs in continental tight oil reservoirs under fracturing conditions are systematically studied through laboratory experiments. The results show that under high pressure, CO2 effectively changes the pore structure through the extraction of hydrocarbons, dissolution of the rock matrix, and migration of minerals. CO2 dissolution of the rock matrix can significantly increase the number and complexity of fractures. Furthermore, CO2 has a higher solubility in formation fluid under high-pressure conditions. Given the higher pressures, CO2 forms a miscible phase with crude oil, diffuses more deeply into the formation, and reacts fully with the reservoir minerals and fluid during CO2 fracturing. Accordingly, CO2 can improve the permeability of the reservoir and flowability of crude oil significantly. Hence, CO2 fracturing can enhance oil recovery and CO2 sequestration more effectively. Core displacement experiments indicate that oil recovery of CO2 soaking process after CO2 fracturing is 36%, which is 12% and 9% higher than those of CO2 huff and puff and CO2 flooding with 5 pore volume, respectively. Field tests show that average oil production after CO2 fracturing is 1.42 times higher than that after CO2 flooding, which further validates the advantage of CO2 fracturing and demonstrates its huge application potential.This article has not yet been cited by other publications.

chemistry, multidisciplinary
Characteristics and Mechanisms of CO2 Flooding with Varying Degrees of Miscibility in Reservoirs Composed of Low-Permeability Conglomerate Formations

Yun Luo,Shenglai Yang,Yiqi Zhang,Gen Kou,Shuai Zhao,Xiangshang Zhao,Xing Zhang,Hao Chen,Xiuyu Wang,Zhipeng Xiao,Lei Bai

DOI: https://doi.org/10.3390/pr12061203

IF: 3.5

2024-06-13

Processes

Abstract:The reservoir type of the MH oil field in the Junggar Basin is a typical low-permeability conglomerate reservoir. The MH oilfield was developed by water injection in the early stage. Nowadays, the reservoir damage is serious, and water injection is difficult. There is an urgent need to carry out conversion injection flooding research to improve oil recovery. The use of CO2 oil-flooding technology can effectively supplement formation energy, reduce greenhouse gas emissions, and improve economic benefits. In order to clarify the feasibility of CO2 flooding to improve oil recovery in conglomerate reservoirs with low permeability, strong water sensitivity, and severe heterogeneity, this paper researched the impact of CO2 miscibility on production characteristics and mechanisms through multi-scale experiments. The aim was to determine the feasibility of using CO2 flooding to enhance oil recovery. This study initially elucidated the oil displacement characteristics of varying degrees of miscibility in different dimensions using slim tube experiments and long core experiments. Subsequently, mechanistic research was conducted, focusing on the produced oil components, changes in interfacial tension, and conditions for pore mobilization. The results indicate that the minimum miscibility pressure (MMP) of the block is 24 MPa. Under the slim tube scale, the increase in the degree of miscibility can effectively delay the gas breakthrough time; under the core scale, once the pressure reaches the near mixing phase, the drive state can transition from a non-mixed "closed-seal" to a "mixed-phase" state. Compared to the immiscible phase, the near-miscible and completely miscible phase can improve the final recovery efficiency by 9.27% and 18.72%. The component differences in the displacement products are mainly concentrated in the high-yield stage and gas breakthrough stage. During the high-yield stage, an increase in miscibility leads to a higher proportion of heavy components in the produced material. Conversely, in the gas breakthrough stage, extraction increases as the level of mixing increases, demonstrating the distinct extracting characteristics of different degrees of mixed phases. The core experiences significant variations in oil saturation mostly during the pre-gas stage. CO2 miscible flooding can effectively utilize crude oil in tiny and medium-sized pores during the middle stage of flooding, hence reducing the minimum threshold for pore utilization to 0.3 μm.

engineering, chemical
Research Progress and Prospect of Carbon Dioxide Utilization and Storage Based on Unconventional Oil and Gas Development

Lei Li,Xue Zhang,Jiahui Liu,Qiuheng Xie,Xiaomei Zhou,Jianyang Zheng,Yuliang Su

DOI: https://doi.org/10.3390/en15249383

IF: 3.2

2022-12-11

Energies

Abstract:Energy security and the reduction of greenhouse gases such as carbon dioxide are two major crises facing the world today. Using carbon dioxide to develop unconventional oil and gas resources is a positive way to reduce greenhouse gas emissions, which can significantly alleviate global energy security issues. This study systematically introduces the prerequisites for CO2 to extract crude oil and CO2 to be safely and effectively stored. Under high temperature and high pressure, the rock properties of deep reservoirs are completely different from those of atmospheric conditions in the two-phase porous media environment of crude oil and high salinity formation water. The research progress on the phase behavior, mutual solubility, CO2 storage potential and mechanism between supercritical CO2 and crude oil, formation water and reservoir are reviewed in detail. In addition, CO2 leakage will inevitably occur during long-term geological storage, the proper estimation and evaluation of the risk and establishment of corresponding sealing methods are the way forward for CO2 geological storage. By systematically elaborating the nature, advantages and disadvantages of fluid–fluid, fluid–solid interaction and geological integrity destruction mechanism, the directions in which several key problems should be solved were pointed out.

energy & fuels
The Difference in Damage to Low-Permeability Reservoirs by Different Injection Methods of CO2 Flooding

Yiwen Liu,Meilong Fu

DOI: https://doi.org/10.3390/pr11123260

IF: 3.5

2023-11-22

Processes

Abstract:Low-permeability reservoirs have become an important field of oil and gas development in China. CO2 flooding technology is an effective technical means for tertiary oil recovery. Although the asphaltene in the system is deposited in the form of a solid after CO2 injection into the reservoir in contact with crude oil, which causes a certain blockage to the reservoir, the dissolution during the injection process improves the seepage capacity of the reservoir as a whole, and the damage degree of CO2 flooding to low-permeability reservoirs under different injection modes is different. In this paper, the damage degree of asphaltene precipitation to low-permeability reservoirs under different injection modes of CO2 flooding is quantitatively characterized. The mechanism experiment of organic scale plugging after continuous CO2 flooding and CO2–water alternate flooding, the wettability experiment of reservoirs, and the evaluation experiment of CO2–water solution on rock dissolution are carried out, and the variation characteristics of relative permeability curve parameters are evaluated. In this paper, the damage degree of asphaltene precipitation to low-permeability reservoirs under different injection modes of CO2 flooding is quantitatively characterized. The mechanism experiment of organic scale plugging after continuous CO2 flooding and CO2–water alternate flooding, the wettability experiment of reservoirs, and the evaluation experiment of CO2–water solution on rock dissolution are carried out. The variation characteristics of relative permeability curve parameters are evaluated. The results show that the organic scale produced by CO2 flooding will block the pore throat of the rock, but, on the whole, the dissolution caused by the reaction of CO2 and chlorite is stronger, which makes the recovery rate of low-permeability reservoirs effectively improved. The organic scale blockage caused by CO2–water alternating flooding is weaker than that caused by continuous CO2 flooding. The dissolution effect is better and the permeability is higher. It can achieve a better oil displacement effect in pores with a pore size greater than 0.2 μm. On the whole, it can increase the core pore space and seepage channel, so that the recovery rate of low-permeability reservoirs can be effectively improved. This study has important theoretical and practical significance for improving oil recovery in low-permeability reservoirs.

engineering, chemical
Characterization of Stages of CO2-Enhanced Oil Recovery Process in Low-Permeability Oil Reservoirs Based on Core Flooding Experiments

Yutong Zhu,Xinwen Wang,Yulong Kang,Chaobin Guo,Qingcheng He,Cai Li

DOI: https://doi.org/10.3390/en17215469

IF: 3.2

2024-11-01

Energies

Abstract:Understanding the CO2 displacement mechanism in ultra-low-permeability reservoirs is essential for improving oil recovery. In this research, a series of displacement experiments were conducted on sandstone core samples from the Chang 6 reservoir in the Huaziping area using a multifunctional core displacement apparatus and Nuclear Magnetic Resonance (NMR) technology. The experiments were designed under conditions of constant pressure, variable pressure, and constant effective confining stress to simulate various reservoir scenarios. The results indicated that the distribution characteristics of the pore structure in the rock samples significantly influenced the CO2 displacement efficiency. Specifically, under identical conditions, rock cores with a higher macropore ratio exhibited a significantly enhanced recovery rate, reaching 68.21%, which represents a maximum increase of 31.97% compared to cores with a lower macropore ratio. Though fractures can facilitate CO2 flowing through pores, the confining pressure applied during displacement caused a partial closure of fractures, resulting in reduced rock permeability. Based on the oil-to-gas ratio and oil recovery in the outlet section of the fractured rock samples, the CO2 displacement process exhibited five stages of no gas, a small amount of gas, gas breakthrough, large gas channeling, and gas fluctuation. Although the displacement stage of different cores varies, the breakthrough stage consistently occurs within the range of 2 PV. These insights not only enhance our understanding of CO2 displacement mechanisms in low-permeability reservoirs but also provide actionable data to inform the development of more effective CO2-EOR strategies, significantly impacting industrial practices.

energy & fuels

The Existing State of Enhanced Oil Recovery by Utilizing Carbon Dioxide

Research on Evaluation Methodologies of Carbon Dioxide Flooding Technology and Current Applications

Carbon Dioxide Flooding Technology for Ultra-Low Permeability Reservoirs to Greatly Enhance oil Recovery

Laboratory Evaluation of CO2 Flooding: A Strategic Technology for Sustainable Development of Oil Companies

Experimental investigation of carbon dioxide flooding in heavy oil reservoirs for enhanced oil recovery

Inspirations from Field-Reservoir CO2 Flooding with Different Miscible Degrees under Cross-Scale Oil Reservoir Conditions

Study of Supercritical State Characteristics of Miscible CO2 Used in the Flooding Process

Mechanism of CO2 enhanced oil recovery in shale reservoirs

Experimental Study on Carbon Dioxide Flooding Technology in the Lunnan Oilfield, Tarim Basin

Investigation on Displacement Efficiency and Enhance Oil Recovery Performance of CO 2 and CO 2 -chemical Additive Composite System Flooding Using LBM Simulation

The Three-Dimensional Heterogeneous Simulation Study of CO2 Flooding in Low-Permeability Reservoirs

Experimental study on CO2 flooding characteristics in low-permeability fractured reservoirs

A study on the fuzzy evaluation system of carbon dioxide flooding technology

Application of CO2 miscible flooding in ultra-low permeability beach-bar sand reservoir

Pore-scale characterization of carbon dioxide storage at immiscible and near-miscible conditions in altered-wettability reservoir rocks

Enhanced Oil Recovery through Carbon Dioxide Injection: A Compositional Simulation Approach

Stimulation and Sequestration Mechanism of CO 2 Waterless Fracturing for Continental Tight Oil Reservoirs

Characteristics and Mechanisms of CO2 Flooding with Varying Degrees of Miscibility in Reservoirs Composed of Low-Permeability Conglomerate Formations

Research Progress and Prospect of Carbon Dioxide Utilization and Storage Based on Unconventional Oil and Gas Development

The Difference in Damage to Low-Permeability Reservoirs by Different Injection Methods of CO2 Flooding

Characterization of Stages of CO2-Enhanced Oil Recovery Process in Low-Permeability Oil Reservoirs Based on Core Flooding Experiments