Abstract:Railway acoustic problems commonly have a constant cross-section and uniform properties in the longitudinal direction. To solve such 3D acoustic problems with reduced effort, a wavenumber domain acoustic finite element (2.5D acoustic FE) method is introduced in which the cross-section of the domain is meshed and the third dimension is represented by a wavenumber transform. The acoustic wavenumber is thereby decomposed into a combination of wavenumbers in the x direction and in the y-z plane. The method is extended to exterior noise problems by including a perfectly matched layer (PML) with bespoke absorption to prevent reflection of the sound waves at the boundary of the domain. The method as presented can be used with 2D finite element solutions from commercial software. To verify the application of the 2.5D acoustic FE method for interior acoustic problems, sound attenuation in a tunnel is predicted and compared with existing measurements. To verify the implementation for exterior acoustic problems, an example is given of the sound distribution on the side surface of a train due to a compact source below it. The comparison of the solutions obtained from the 2.5D acoustic FE models with measurements shows good agreement in the both validation cases. The method is then used to investigate the effect of the tunnel walls on the sound distribution on the train external surface by comparing the results with the case in the open field. A highly reverberant sound field is found in tunnels, which increases the sound pressure level on the train side-surface above 250 Hz by about 10 dB for a tunnel with a ballasted track and by about a further 6 dB for a slab track.

Research on 2D compound sonic field finite element model of ANSYS

Numerical Simulation and Structure Optimization of Compressor Muffler

Hybrid Method of Image Source Model and Diffuse Surface Integration for the Simulation of Room Sound Field

Computer Simulation Model for Room Diffuse Sound Field

Finite Element Method Simulation Analysis for Sound Field of Exhaust Muffler

Sound Field Separating on Arbitrary Surfaces Enclosing a Sound Scatterer Based on Combined Integral Equations.

Modeling and Analysis for Sound Field of Rectangular Small Enclosure under the Excitation of Panel Loudspeaker by Using FEM

Fracture Modeling of Curved Composite Shell Structures Using Augmented Finite Element Method

Acoustic simulation using singular boundary method based on loop subdivision surfaces: A seamless integration of CAD and CAE

Extended finite element method with cell-based smoothing for modeling frictional contact crack-induced acoustic nonlinearity involving distorted mesh

A hybrid spectral/finite element method for accurate and efficient modelling of crack-induced contact acoustic nonlinearity

Numerical Model on Sound-Solid Coupling in Human Ear and Study on Sound Pressure of Tympanic Membrane

Sensitivity Analysis of Underwater Structural-Acoustic Problems Based on Coupled Finite Element Method/Fast Multipole Boundary Element Method with Non-Uniform Rational B-Splines

Interior three-dimensional acoustic modeling and modal analysis using wavelet-based finite-element approach

Finite Element Modeling for a Human Tympanic Membrane with Sections of Polymer-Embedded Temporal Bone

Numerical research on the focusing characteristics of steady state sound field in finite space by combining finite element and phase conjugation methods

Study on vibro-acoustic performances of coupled orthogonally stiffened cylindrical shell-inner foundation system using wavenumber analysis method

Research on sound propagation model in acoustic diode

A coherent model of sound propagation in long enclosures with different acoustics boundaries

Sensitivity analysis of non-uniform rational B-splines–based finite element/boundary element coupling in structural-acoustic design

A 2.5D acoustic finite element method applied to railway acoustics