Abstract:Graphene oxide (GO) and yttria-stabilized zirconia (YSZ) nanoparticle reinforced copper (Cu) matrix nanocomposite coatings were successfully fabricated via direct current electroplating from a copper sulfate electrolyte. Influences of particle concentration (GO/YSZ) in electrolyte, electrodeposition time and applied current density on composition, microstructural and anti-corrosion performance of Cu-GO and Cu-GO-YSZ composite coatings were explored. The corrosion behaviors were evaluated by electrochemical measurement. Results indicated the composite coatings exhibit a uniform and compact surface which was made up of stacked granules, exhibiting morphologies that nanoflake-like structures dispersed on the pyramid-like copper matrix granule clusters network. The crystallite sizes of Cu-GO first increased and then decreased as GO, time and current density increased, while it varied little for Cu-GO-YSZ composite coating. The preferred orientation of Cu matrix composite coating was oriented (220) texture. The content of incorporated GO increased with the introduction of YSZ into the Gu-GO matrix. The Gu-GO coating contains 93.3 wt% Cu and 5.5 GO, and the Gu-GO-YSZ coating contains 91.7 wt% Cu and 7.6 wt% GO. The average roughness Ra of Cu-GO and Cu-GO-YSZ were 240 ± 7 nm and 236 ± 40 nm, respectively. The addition of GO nanosheets could improve the microhardness and decrease the COF of Cu matrix. Both self-lubrication effect and load-bearing capability were improved by introducing GO and YSZ together in the Cu matrix. Deposits obtained at 30 mA cm−2, 30 min, 0.1 g L−1 GO and 10 g L−1 YSZ particles own the optimal corrosion resistance with the maximum Rp. It reveals that corrosion resistance was enhanced by the presence of GO nanosheets in Cu matrix for physical isolation effect of GO and the preferred orientation (220) plane, which benefited the formation of passive film.

Investigation of Cu-graphite Composites Prepared by Electroforming

Effect of Copper-Plated Graphite Content on the Microstructure and Properties of Copper-Graphite Composites Prepared by Spark Plasma Sintering

Superior mechanical properties and wear resistance of copper/graphite metallic composites fabricated with fibrous copper powder

Role of Cr-carbide Coating on Graphite Particles in the Mechanical and Wear Behavior of Graphite/Copper Composites

Characterization and Tribological Properties of Graphene/Copper Composites Fabricated by Electroless Plating and Powder Metallurgy

Fretting wear behavior of brass/copper-graphite composites as a contactor material under electrical contact

Microstructure and property of electroformed nano-Al2O3/Cu composite

Enhanced mechanical and tribological properties of copper matrix composites reinforced by copper-coated graphite and Ti3AlC2

Friction and Wear Behavior of Copper-Graphite Composite Material in High-Speed Sliding with Current

Microstructure and Wear Resistance of Cu/nano-SiC Composite

The Study of Microstructure Characterization: Cu Modified Cu-Ni-graphite Composite

Effect of graphene addition on properties of Cu-based composites for electrical contacts

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites

On the tribological behaviors of Cu matrix composites with different Cu-coated graphite content

Microstructure and performance of electroformed Cu/nano-SiC composite

In-situ synthesized graphene reinforced copper matrix composites with enhanced thermal properties and corrosion resistance

Preparation and characterization of Cu-GO and Cu-GO-YSZ nanocomposite coating by electrochemical deposition for improved mechanical and anti-corrosion properties

Wear resistance mechanism of graphene/copper composite foils with bimodal structure

Effect of La2O3 on Electrical Friction and Wear Properties of Cu-graphite Composites

A novel approach for in-situ preparation of copper/graphene composite with high hardness and high electrical conductivity

Enhanced Wetting and Properties of Carbon/Copper Composites by Cu-Fe Alloying