Abstract:N-decane decomposition with plasma to obtain prone detonation gaseous fuel is investigated by adopting fuel liquid film feeding mode at applied voltage of 10 kV and 15 kV, discharge frequency of 300-3000 Hz with interval 100 Hz. The result shows that the discharge parameters can regulate the composition and the concentration of the cracked products. When the composition of the product is unchanged, the concentration and proportion of the components can be increased as the discharge frequency becomes higher. The hydrogen concentration increases 3.4 times and 2.3 times respectively for the applied voltage of 15 kV and 10 kV as the discharge frequency is increased from 500 to 3000 Hz. However, the voltage has no effect on the proportion of the components, and increasing the voltage only increases the concentration of the species. For selectivity, raising the discharge frequency can greatly increase the species selectivity of hydrogen and acetylene that are most prone to detonate. The selectivities of hydrogen and acetylene are the highest at 15 kV and 3 kHz, reaching 18.40% and 4.22% respectively, and at this time, the selectivity of ethylene is the lowest, which is 60.4%. Besides, it is confirmed that high selectivity can be achieved at the lower specific energy input causing by low-voltage/high-frequency discharge. Through the analysis of the bond dissociation energy, there is a competitive relationship between the production of ethylene, ethane and pentane which all consume ethyl, and two possible pathways for the production of acetylene are put forward. (C) 2018 Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.

The experimental investigation on the decomposition of hexane in gliding arc discharge

Plasma Catalysis on the Decomposition of Hexane with Gliding Arc Discharge

Study of Mechanism for Hexane Decomposition with Gliding Arc Gas Discharge

Energy efficiency optimization for H2S removal by dielectric barrier discharge plasma

Decomposition of Straight Chain Hydrocarbon Volatile Organic Compounds with Gliding Arc Discharge

Hydropyrolysis of N-Hexane and Toluene to Acetylene in Rotating-Arc Plasma

Gliding Arc Discharge Plasma Assisted Decomposition of Ammonia into Hydrogen

Decomposition of Naphthalene by Dc Gliding Arc Gas Discharge

The Dependence of Gliding Arc Gas Discharge Characteristics on Reactor Geometrical Configuration

Scale-up analysis and development of gliding arc discharge facility for volatile organic compounds decomposition

Decomposition of Toluene in A Gliding Arc Discharge Plasma Reactor

Degradation of n-hexane by the high-throughput double dielectric barrier discharge: Influencing factors, degradation mechanism and pathways

Decomposition of ammonia and hydrogen sulfide in simulated sludge drying waste gas by a novel non-thermal plasma.

Heterogeneous liquid discharge cracking of n-hexadecane as a heavy oil model compound: a way to generate plasma in liquid hydrocarbons at low voltage

Decomposition of volatile organic compounds using gliding arc discharge plasma

N-decane Decomposition by Microsecond Pulsed DBD Plasma in a Flow Reactor

Decomposition of Toluene in A Rotating Glidarc Discharge Reactor

Removal of Toluene by Gliding Arc Discharge Plasma

Destruction of n -hexane from the air stream by pulsed discharge plasma: Modelling and key process parameters optimization by CCD-RSM

Degradation of Phenol in Aqueous Solutions by Gas–Liquid Gliding Arc Discharges

Mechanism of Decane Decomposition in a Pulsed Dielectric Barrier Discharge Reactor