Microstructural and tribological characterization of plasma- and gas-nitrided 2Cr13 steel in vacuum

Jianqun Yang,Yong Liu,Zhuyu Ye,Dezhuang Yang,Shiyu He

DOI: https://doi.org/10.1016/j.matdes.2010.07.022

IF: 9.417

2011-01-01

Materials & Design

Abstract:Plasma- and gas-nitrided 2Cr13 samples were characterized using optical microscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and microhardness testing techniques. Nitrogen concentration profiles in the cross-sections of the nitrided samples were obtained by glow discharge optical spectroscopy (GDOS). Residual stress profiles along depth of the nitrided samples were measured using an X-ray stress tester. The tribological behaviour of the plasma- and the gas-nitrided samples in vacuum was investigated in order to analyse the effect of nitriding on wear resistance of the 2Cr13 steel. The results show the tribological properties of the 2Cr13 steel in vacuum are improved considerably by plasma nitriding and gas nitriding resulted from microstructure modification and surface hardening during nitriding. The plasma-nitrided samples have better wear resistance than the gas-nitrided samples under 30N, while the gas-nitrided samples have higher wear resistance under 90N. With increasing normal load from 30N to 90N, the wear mechanism shows a transition from mild adhesive and abrasive wear to severe adhesive or even delamination wear. The plasma-nitrided sample has thicker compound layer than the gas-nitrided sample, resulting that it exhibits more intensive delamination under high load of 90N.