Abstract:Reliable process development is accompanied by intense experimental effort. The utilization of an intensified design of experiments (iDoE) (intra-experimental critical process parameter (CPP) shifts combined) with hybrid modeling potentially reduces process development burden. The iDoE can provide more process response information in less overall process time, whereas hybrid modeling serves as a commodity to describe this behavior the best way. Therefore, a combination of both approaches appears beneficial for faster design screening and is especially of interest at larger scales where the costs per experiment rise significantly. Ideally, profound process knowledge is gathered at a small scale and only complemented with few validation experiments on a larger scale, saving valuable resources. In this work, the transferability of hybrid modeling for Chinese hamster ovary cell bioprocess development along process scales was investigated. A two-dimensional DoE was fully characterized in shake flask duplicates (300 ml), containing three different levels for the cultivation temperature and the glucose concentration in the feed. Based on these data, a hybrid model was developed, and its performance was assessed by estimating the viable cell concentration and product titer in 15 L bioprocesses with the same DoE settings. To challenge the modeling approach, 15 L bioprocesses also comprised iDoE runs with intra-experimental CPP shifts, impacting specific cell rates such as growth, consumption, and formation. Subsequently, the applicability of the iDoE cultivations to estimate static cultivations was also investigated. The shaker-scale hybrid model proved suitable for application to a 15 L scale (1:50), estimating the viable cell concentration and the product titer with an NRMSE of 10.92% and 17.79%, respectively. Additionally, the iDoE hybrid model performed comparably, displaying NRMSE values of 13.75% and 21.13%. The low errors when transferring the models from shaker to reactor and between the DoE and the iDoE approach highlight the suitability of hybrid modeling for mammalian cell culture bioprocess development and the potential of iDoE to accelerate process characterization and to improve process understanding.

Model Migration for Development of a New Process Model

Process Similarity and Developing New Process Models Through Migration

Model Migration with Inclusive Similarity for Development of a New Process Model

Process Modeling Based on Process Similarity

Cost-effective process modeling and optimization methodology assisted by robust migration techniques

Transfer Learning Based on Incorporating Source Knowledge Using Gaussian Process Models for Quick Modeling of Dynamic Target Processes

Model Migration Based on Subspace Separation for Development of a New Process Monitoring Model

Bayesian migration of Gaussian process regression for rapid process modeling and optimization

An Approach to Incremental Feature Model Conversion

Model Management for Refinery Multi-level Simulation and Optimization

Data Driven Model Mismatch Detection Based on Statistical Band of Markov Parameters

Batch process modeling based on process similarity

Iterative improvement of parameter estimation for model migration by means of sequential experiments

A Selective Migration-Based Improved GPR Modeling Method for Batch Process

A Review for Model Plant Mismatch Measures in Process Monitoring

Improving the Generalization Performance of Data-driven Predictive Model for Dynamic Process Systems

Model Transferability and Reduced Experimental Burden in Cell Culture Process Development Facilitated by Hybrid Modeling and Intensified Design of Experiments

Model Validation Via Uncertainty Propagation and Data Transformations

Model-Free Quality Optimization Strategy for a Batch Process with Short Cycle Time and Low Operational Cost

Model evolvement and reuse technology of injection molding machine based on performance knowledge

Process Modeling Leveraged by Workflow Structure and Running Logs Analysis