Abstract:As an unavoidable hazard threatening the mining safety and an important energy resources for human society and environmental protection, coalbed methane (CBM) extraction is proved to be of great importance pre mining. The method of upward borehole extraction is commonly used for underground gas extraction, however, some limitations of the traditional sealing methods and materials always make poor sealing results and extraction efficiency. In this paper, a method of upward borehole self-sealing technology using drill cuttings has been proposed. The sealing failure of the upward boreholes has been investigated and three potential leakage paths for air have also been studied, such as the defects of the sealing material, the channels between materials and the borehole walls, and the cracks around the borehole. An experimental system was been established to simulate upward borehole self-sealing technology, and some critical parameters, like particle size distribution (PSD) and the motion of drill cuttings within the borehole, were investigated. The PSD results indicated that huge amount of small scale particles could be compacted to be dense with low porosity; the motion of particles results shown that the cracks around the boreholes could be occupied by different scales of particles due to the large initial velocity; the angle of repose for accumulated particles increased as the increasing particle volume, blocking the contact interface by some water-coal fines. A field application was carried out in the No. 8 coal mine in Pingdingshan, China, and the high concentration of extracted CBM verified the feasibility of upward borehole self-sealing technology, in which these boreholes could be sealed by cuttings by preventing the three potential leakage paths, and the concentration variances indicated that the effective sealing duration could be recognized. The laboratory and field results all prove that the method of upward borehole self-sealing using drill cuttings could be helpful to improve CBM extraction efficiency and might be a potential and promising technology in the future.

Research and application of directional grouting sealing under pressure technology in Bide coal mine

Parameter Optimization of Constant Pressure Grouting Technology for Borehole Sealing with Inorganic Noncondensable Material in Tectonic Coalbed of South China

Research and application of hydraulic fracturing borehole bag sealing technology

Performance of New Inorganic Retarding Sealing Material for Gas Drainage Boreholes

Study on key grouting blocking parameters of gas drainage boreholes in soft coal seams

Technology research on long-distance compressing-air grouting sealing of drilling hole in coal seam

Comparative analysis of sealing effect of different hole sealing processes in coal mine

Determination of Key Technical Parameters in the Study of New Pressure Sealing Technology for Coal Seam Gas Extraction

Research and Application of Sealed coring Technology in In-situ Coal Seam of Directional Long borehole in Coal mine

Precise application of grouting technology in underground coal mining: water inrush risk of floor elimination

Experimental Research on Performance of New Gas Drainage Borehole Sealing Material with High Fluidity

Borehole sealing mechanism and a new technology for coal seam gas pressure test:a research

Method for Pressure Relief in Deep Coal Mine Roadways Using Borehole Groups and Its Application to Guqiao Coal Mine

Research on gas drainage technology and equipment of high-level directional drilling in coal mine

Performance and application of new inorganic retarding sealing material suitable for multi-scale fractures

Diffusion Mechanism of Slurry during Grouting in a Fractured Aquifer: A Case Study in Chensilou Coal Mine, China

Investigation of sealing mechanism and field application of upward borehole self-sealing technology using drill cuttings for safe mining

Air Leakage Characteristics of Gas Boreholes in Deep Coal Seams and Application of Short-Hole Grouting and Plugging

Research and Application of Coal Seam Permeability Improvement Technology by Sectional Directional Hydraulic Fracturing

Criterion of Grouting Pressure in Regional Advance Grouting Treatment to Prevent Water Disaster from Karst Aquifers in Coal Seam Floors

Physical simulation study on grouting water plugging of flexible isolation layer in coal seam mining