Abstract:Poly(lactic acid) (PLA) is a biodegradable plastic and grabs attention in several applications such as biomedical implantation, film, packaging and clothing. Instead, PLA itself has a characteristic of brittleness, resulting in poor mechanical properties, and its slow ability in degradation leads to waste disposal problem. The present research aims to develop material in such a way to have a good combination of properties and optimum degradation ability. The PLA nanocomposites were prepared via melt blending that consisted of two types of carbon nanotubes (CNTs): unmodified carbon nanotubes (CNTs) and modified CNTs (mCNTs). The effect of 5 wt% poly (ethylene glycol) (PEG) as plasticizer on nanocomposites with CNTs material loading at 0.5 wt%, 1.0 wt%, 1.5 wt% and 2.0 wt% was studied. The analysis of physical properties was done using hardness testing and melt flow index (MFI). Neat PLA only gave around 69.0–77.6 Shore D in hardness test, while MFI exhibited around 36.1–39.4 g/10 min. PLA/mCNTs and PLA/PEG/mCNTs at 1.5 wt% exhibited the highest values of hardness testing which were 86.0 and 85.9 Shore D, respectively. In MFI study, the results were 70.0 g/10 min for PLA/mCNTs and 80.3 g/10 min for PLA/PEG/mCNTs. This proved that the PEG is useful in reducing the brittleness of nanocomposite. The full exfoliation of CNTs and mCNTs in the matrix observed from the X-ray diffraction analysis supported the excellent hardness and MFI properties. These nanocomposites also showed high thermal stability as obtained from differential scanning calorimetry and thermogravimetric analysis studies compared with neat PLA. The morphology study by field emission scanning electron microscopy analysis confirmed these findings through the existence of a smooth fracture surface, especially when PEG was loaded as evidence of good distribution of nanofiller in the matrix was established. Based on all analyses done, PLA/PEG/mCNTs were chosen as the good nanocomposite among others.

EFFECT OF PEG ON PROPERTIES OF PLA/THERMOPLASTIC STARCH COMPOSITES

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

Thermal and mechanical properties of polyethylene glycol (PEG)-modified lignin/polylactic acid (PLA) biocomposites

Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid)

Influence of carboxy-terminated hyperbranched polyester and polyethylene glycol on the mechanical and thermal properties of polylactic acid/straw flour composites

Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

The Effect of Polyethylene Glycol on the Non-Isothermal Crystallization of Poly(L-lactide) and Poly(D-lactide) Blends

The effect of poly(ethylene glycol) on the properties of poly (lactic acid)/silane-modified bacterial cellulose nanocomposites

Physical and degradation properties of binary or ternary blends composed of poly (lactic acid), thermoplastic starch and GMA grafted POE

Effect of screw speed in compounding of poly(butylene adipate‐co‐terephthalate)/thermoplastic starch blends and their processability by cast extrusion

Effect of different proportions of glycerol and D-mannitol as plasticizer on the properties of extruded corn starch

Tailoring the mechanical and thermal properties of polylactic acid-based bionanocomposite films using halloysite nanotubes and polyethylene glycol by solvent casting process

Thermoplastic Starch (TPS)/Polylactic Acid (PLA) Blending Methodologies: A Review

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Relationship between phase morphologies and mechanical properties of thermoplastic starch/poly(butylene adipate-co-terephthalate) composite films prepared by extrusion blowing

Reactive compatibilization and properties of low-cost and high-performance PBAT/thermoplastic starch blends

Elucidating the plasticizing effect on mechanical and thermal properties of poly(lactic acid)/carbon nanotubes nanocomposites

Effects of primary, secondary and tertiary structures on functional properties of thermoplastic starch biopolymer blend films

An Efficient Plasticization Method For Poly(Lactic Acid) Using Combination Of Liquid-State And Solid-State Plasticizers