Abstract:Non-charged PVA-SiO2 hybrid membranes are prepared through sol-gel process among polyvinyl alcohol.(PVA) and double cross-linking agents, which are selected from four types of alkoxysilanes including tetraethoxysilane (TEOS), tetramethoxysilane (TMOS), gamma-aminopropyl triethoxysilane (APTEOS) and methacryloxypropyl trimethoxy silane (MPS). The double cross-linking agent can combine their advantages including different hydrolysis rates of -OC2H5 and -OCH3 groups, high compatibility of -NH2, and polymerizable C=C bonds.The -NH2 group from APTEOS can 'enhance membrane homogeneity, thermal stability and flexibility due to its compatibility with PVA-OH groups. The membranes have high selectivity (62-101) but low permeability in diffusion dialysis process for separating NaOH/Na2WO4 solution. Single type of -Si (OCH3) groups produces large silica particles (1.5-5 mu m), which reduce membrane stability but enhance permeability. The membrane has low strength and flexibility, and high swelling degrees in 65 degrees C water (373-408%) and weight loss percentage in 65 degrees C NaOH solution (25.8-28.7%). The permeability can reach up to 0.0076-0.0092 m/h but the selectivity is only 23.7-25.0 at 20-40 degrees C. The combination of -Si(OCH3) and -Si(OC2H5) groups (TEOS and MPS) can obtain high strength and flexibility (20.3 MPa, 571%), acceptable swelling degrees (232-279%) and balanced permeability and selectivity (0.0043-0.0071 m/h, 45110). Hence, double cross-linking agents can be combined to prepare optimized neutral membranes for diffusion dialysis. (C) 2016 Elsevier B.V. All rights reserved.

Free-standing anion-exchange PEO–SiO2 hybrid membranes

Polybenzimidazole/ionic-liquid-functional Silica Composite Membranes with Improved Proton Conductivity for High Temperature Proton Exchange Membrane Fuel Cells

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Novel silica/poly(2,6-dimethyl-1,4-phenylene oxide) hybrid anion-exchange membranes for alkaline fuel cells: Effect of heat treatment

Preparation and properties of SiO2/PEG/PWA hybrid proton exchange membranes

Hybrid anion exchange hollow fiber membranes through sol–gel process of different organic silanes within BPPO matrix

Free-standing hybrid anion-exchange membranes for application in fuel cells

A novel anion exchange membrane based on silicone/polyphenylene oxide with excellent ionic conductivity for AEMFC

Novel Anion-Exchange Organic–inorganic Hybrid Membranes Prepared Through Sol–gel Reaction of Multi-Alkoxy Precursors

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

A Cross-Linked Fluorinated Poly (aryl Ether Oxadiazole) S Using a Thermal Cross-Linking for Anion Exchange Membranes

Fundamental studies of a new hybrid (inorganic–organic) positively charged membrane: membrane preparation and characterizations

Organic–inorganic crosslinked and hybrid membranes derived from sulfonated poly(arylene ether sulfone)/silica via sol–gel process

Cross-linked Hydroxide Conductive Membranes with Side Chains for Direct Methanol Fuel Cell Applications

Novel anion-exchange organic-inorganic hybrid membranes prepared through sol-gel reaction and UV/thermal curing

Novel Hollow‐fiber Anion‐exchange Hybrid Membranes: Preparation and Characterization

Anion exchange hybrid membranes from PVA and multi-alkoxy silicon copolymer tailored for diffusion dialysis process

Double Cross-Linking PVA-SiO2 Hybrid Membranes for Alkali Recovery

Study of High Performance Sulfonated Polyether Ether Ketone Composite Electrolyte Membranes

SPES‐SiO2 Hybrid Proton Exchange Membranes from in Situ Sol–gel Process of Negatively Charged Alkoxysilane

Novel anion-exchange organic–inorganic hybrid membranes: Preparation and characterizations for potential use in fuel cells