Abstract:Organic electroluminescence is one of the most promising technology for next generation of flat panel display. Hole transporting layer represents the weakest link in the electroluminescent structure considering the thermal stability of the materials. The most widely used hole transporting material, N,N'-bis (1-naphthyl)-N, N'-diphenyl-1, 1'-biphenyl-4, 4'-diamine (NPB), has a glass transition temperature ( Tg) of 95℃, which is much lower than that of the electron transporting material, tris (8- hydroxyquinoline) aluminum (Alq3) . Based on the good hole transporting property and suitable energy level matched with other materials of NPB, two new hole transporting materials: N, N'-bis(1-naphthyl)- N,N'-di(4-methylphenyl)-1,1'-biphenyl-4, 4'-diamine (NTB) and N, N'-bis(1-naphthyl)-N, N'-di(4- tert-butylphenyl)-1, 1'-biphenyl-4, 4'-diamine (NBB) were synthesized by introducing methyl and tert- butyl groups into NPB to improve its thermal stability. The glass transition temperature (Tg) of NTB and NBB measured by DSC are 108℃ and 129℃ respectively, showing better thermal stability than that of NPB. The ionization energy obtained by ultraviolet photoemission spectroscopy is 5. 2eV for all of NPB and its derivatives. The emission peak in the photoluminescent spectra of the solid films of NTB and NBB are at 455nm and 460nm, which are close to the emission peak of NPB at 440nm. The organic electroluminescent devices using NPB, NTB and NBB as hole transporting layer (HTM) were fabricated with the structure of ITO/CuPc(20nm)/HTM(50nm)/Alq3(60nm)/LiF(0.5nm)/Al(100nm). The emission spectra of the three devices are the same and the green color light was emitted from the Alq3 layer. The turn-on voltages of the devices are 11, 9, 8V for NPB, NTB and NBB, respectively. The brightness of the devices at 15V are 1 000, 1 300, 1 200cd/m2 for NPB, NTB and NBB. The devices with NTB and NBB also show better longevity than that of NPB in a prelimin ary test.

A Carbon Nanotube Composite As an Electron Transport Layer for M3EH-PPV Based Light-Emitting Diodes

Enhanced Brightness in Organic Light-Emitting Diodes Using a Carbon Nanotube Composite As an Electron-Transport Layer

Green Oled Based On Doped Tetra-Methylest& Of Perylene-3,4,9,10-Tetracarboxylicacid Emitter

Hole Blocking in Carbon Nanotube–polymer Composite Organic Light-Emitting Diodes Based on Poly (M-Phenylene Vinylene-Co-2, 5-Dioctoxy-p-phenylene Vinylene)

A Composite from Poly(M-Phenylenevinylene-Co-2,5-Dioctoxy-P-Phenylenevinylene) and Carbon Nanotubes: A Novel Material for Molecular Optoelectronics

Light-Emitting Electrochemical Cells Based On Poly(2-Methoxy-5-Triethoxy-1,4-Phenylene Vinylene)

Electroluminescent Devices Based on Poly(3-Alkylthiophene) Blended with Poly(n-Vinyl Carbazole)

Carbon Nanotube Composites As Efficient Charge Transport Media in Organic Optoelectronic Devices

Transport and Field Emission in Carbon Nanotube - Polymer Composite Cathodes

A Deeper Investigation of New Organic Nanocomposite System MEH‐PPV‐P3HT/SWCNT for Optoelectronic Applications

Photoelectrochemical, photophysical and morphological studies of electrostatic layer-by-layer thin films based on poly(p-phenylenevinylene) and single-walled carbon nanotubes

Multilayered phosphorescent polymer light-emitting diodes using a solution-processed n-doped electron transport layer

Electric Field Evolution of Charge and Energy Transfer in Molecule-Doped Polymer Light-Emitting Diodes

Networked Conductive Polythiophene/Polyaniline Bottlebrushes with Modified Carbon Nanotubes As Hole Transport Layer in Organic Photovoltaics

Poly(pyridine-2,5-diyl) as electron-transport/hole blocking layer in poly(phenylene vinylene) light-emitting diode

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices

Organic electrophosphorescent devices with mixed hole transport material as emission layer

Study on Triplet Exciton Diffusion Length of Mcp in Phosphorescent Organic Light-Emitting Devices Using Electroluminescent Spectra

Bright perovskite light-emitting electrochemical cell utilizing CNT sheets as a tunable charge injector

Photoluminescent and Electroluminescent Properties of DCM-1 Dispersed Poly(p-Phenylene Vinylene) Derivatives

Enhanced Electrical Properties in Percolative Low-Density Polyethylene/carbon Nanotubes Nanocomposites