Abstract:Shape memory polymers (SMPs) have a wide range of potential applications in many fields. In particular, electrically driven SMPs have attracted increasing attention due to their unique electrical deformation behaviors. Carbon nanotubes (CNTs) are often used as SMP conductive fillers because of their excellent electrical conductivities. However, raw CNTs do not disperse into the polymer matrix well. This strictly limits their use. In this study, to improve their dispersion performance characteristics in the polymer matrix, hydroxylated multi-walled carbon nanotubes (MWCNT-OHs) were functionalized with octadecyl isocyanate (i-MWCNTs). Polyurethane with shape memory properties (SMPU) was synthesized using polycaprolactone diol (PCL-diol), hexamethylene diisocyanate (HDI), and 1,4-butanediol (BDO) at a 1:5:4 ratio. Then, electroactive shape memory composites were developed by blending SMPU with i-MWCNTs to produce SMPU/i-MWCNTs. The functionalized i-MWCNTs exhibited better dispersibility characteristics in organic solvents and SMPU composites than the MWCNT-OHs. The addition of i-MWCNTs reduced the crystallinity of SMPU without affecting the original chemical structure. In addition, the hydrogen bond index and melting temperature of the SMPU soft segment decreased significantly, and the thermal decomposition temperatures of the composites increased. The SMPU/i-MWCNT composites exhibited conductivity when the i-MWCNT content was 0.5 wt%. This conductivity increased with the i-MWCNT content. In addition, when the i-MWCNT content exceeded 1 wt%, the composite temperature could increase beyond 60°C within 140 s and the temporary structure could be restored to its initial state within 120 s using a voltage of 30 eV. Therefore, the functionalized CNTs exhibit excellent potential for use in the development of electroactive shape memory composites, which may be used in flexible electronics and other fields.

Significantly Reducing Electrical Resistivity By Forming Conductive Ni Chains In A Polyurethane Shape-Memory Polymer/Carbon-Black Composite

Improving the Electrical Conductivity by Forming Ni Powder Chains in a Shape-Memory Polymer Filled with Carbon Black

Electrical Conductivity of Thermoresponsive Shape-Memory Polymer with Embedded Micron Sized Ni Powder Chains

High-Performance Multifunctional Shape Memory Epoxy with Hybrid Graphene Oxide and Carbon Nanotube Reinforcement

Shape Memory Nanocomposite and Its Application

Investigate Of Electrical Conductivity Of Shape-Memory Polymer Filled With Carbon Black

Synergistic Effect Of Carbon Nanofiber And Sub-Micro Filamentary Nickel Nanostrand On The Shape Memory Polymer Nanocomposite

Electroactive shape memory polyurethane composites reinforced with octadecyl isocyanate-functionalized multi-walled carbon nanotubes

Improved electrical conductivity of polymer/carbon black composites by simultaneous dispersion and interaction-induced network assembly

Shape Memory Polymer Carbon Nanocomposites; Based on Carbon Nanopaper

Electro-Induced Shape-Memory Polymer Nanocomposite Containing Conductive Particles and Short Fibers

Conductive Nanoparticles in Electro Activated Shape Memory Polymer Sensor and Actuator

Mechanical and electrical properties of shape memory polymer matrix and carbon nanocomposite

Electroactivate Shape-Memory Polymer Filled With Nanocarbon Particles And Short Carbon Fibers

Conductive Shape Memory Polymer Composite Technology and Its Applications in Aerospace

Using In-Situ Polymerization of Conductive Polymers to Enhance the Electrical Properties of Solution-Processed Carbon Nanotube Films and Fibers

Shape memory polymer nanocomposites based on carbon nanopaper

Fast Electrochemical Netting of Composite Chains for Transferable Highly Conductive Polymeric Nanofilms.

Electro-activate Styrene-Based Shape Memory Polymer Nanocomposite Filled with Multi-Walled Carbon Nanotubes

Enhancing the electrical conductivity of polymer composites

Electroactive Shape-Memory Polymer Nanocomposites Incorporating Carbon Nanofiber Paper