Abstract:As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC–MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides , which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.

Influence of PAC Addition on Membrane Fouling Control in Micro- Polluted Water Treatment

Membrane Fouling Mechanisms and Control in MBR/PAC Process for Treatment of Micro-polluted Source Water

Study on the Influence Factors of MBR-PAC System

Pesticide Wastewater Treatment by a Membrane Bioreactor

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Combined Process of MBR and PAC for Treatment of Tailwater from WWTP

Membrane Bioreactor for Treatment of Micro-polluted River Water

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Purification of Micro Polluted Surface Water and Study on Membrane Fouling by PAC-UF Process

Using Polyaluminum Chloride and Polyacrylamide to Control Membrane Fouling in A Cross-Flow Anaerobic Membrane Bioreactor

The role of PAC adsorption-catalytic oxidation in the ultrafiltration performance for treating natural water: Efficiency improvement, fouling mitigation and mechanisms

Revisiting the effects of powdered activated carbon on membrane fouling mitigation in an anaerobic membrane bioreactor by evaluating long-term impacts on the surface layer.

Evaluating the impacts of a high concentration of powdered activated carbon in a ceramic membrane bioreactor: Mixed liquor properties, hydraulic performance and fouling mechanism

Using inorganic coagulants to control membrane fouling in a submerged membrane bioreactor

STUDY OF TREATMENT OF MICRO-POLLUTED RAW WATER BY PAC-MBR PROCESS

Optimization of membrane bioreactors by the addition of powdered activated carbon.

Influence of powdered activated carbon on the membrane filtration performance

Comparing Powdered and Granular Activated Carbon Addition on Membrane Fouling Control Through Evaluating the Impacts on Mixed Liquor and Cake Layer Properties in Anaerobic Membrane Bioreactors

The impact of powdered activated carbon types on membrane anti-fouling mechanism in membrane bioreactors