Abstract:Methyltrichlorosilane(M_1) and trimethylchlorosilane(M_3) are usually produced as byproducts in the direct synthesis process of dimethyldichlorosilane.The two chemicals could be converted into more valuable dimethyldichlorosilane through the redistribution technology.By using activated carbon as support, environmentally benign activated carbon supported AlCl_ 3 solid acid catalysts were prepared by the impregnation-evaporation-calcination method.The effects of acid-treatment conditions, AlCl_ 3 loading and activation(calcination)temperature on the catalytic activity were examined for the redistribution reaction of methyltrichlorosilane and trimethylchlorosilane in a 20 mm×800 mm fixed bed reactor under conditions of 310℃,n(M_1/M_3)=1.0 and LHSV=1.5 h~ -1 , and the stability of catalytic activity was investigated also.The structure and surface properties of catalysts were characterized with BET, XRD, TG-DSC and pyridine-adsorbed Raman spectroscopy.The results revealed that it would be better if the activated carbon was treated by hydrochloric acid of 2.0 mol·L~ -1 for 6 h,and suitable conditions for AlCl_ 3 loading and calcination temperature were 1.87 mmol·g~ -1 and 450—500℃ respectively.The stability of the activated carbon supported AlCl_3 catalyst was good for at least 100 h.The XRD and TG-DSC results indicated that AlCl_ 3 would no longer exist in the form of AlCl_ 3 crystal after it was supported on activated carbon and activated.The TG-DSC analysis showed that further heating of the catalyst at 485—600℃ resulted in decomposition and removal of active component from the catalyst surface.The pyridine-adsorbed Raman spectroscopy revealed that the active component of the catalyst behaved as Lewis acid.

Grafting SnCl4 Catalyst As a Novel Solid Acid for the Synthesis of 3-Methylbut-3-en-1-ol

Activated Carbon Supported AlCl_3 Solid Acid Catalyst:Structural Characterization and Catalytic Properties for Redistribution Reaction of Methylchlorosilane

A MOF-supported Chromium Catalyst for Ethylene Polymerization Through Post-Synthetic Modification

Synthesis of Sec - Butyl Acetate by SnCl4/SiO2 Catalyst

Synthesis of 3-methyl-3-buten-1-ol by supercritical CO2 in coordination with HZSM-5-catalyzed formaldehyde-isobutene Prins reaction

Trimerization of Aldehydes with One Α -Hydrogen Catalyzed by Sodium Hydroxide

Synthesis of a novel multi-SO 3 H functionalized strong Brønsted acidic ionic liquid and its catalytic activities for acetalization

A New Solid Acid Catalyst Grafting BF 3 ·et 2 O on Mesoporous Molecular Sieve MCM-41

Synthesis of 1,3-Diols from Isobutene and HCHO via Prins Condensation-Hydrolysis Using CeO2 Catalysts: Effects of Crystal Plane and Oxygen Vacancy

Synthesis of a Novel Strong Brønsted Acidic Ionic Liquid and its Catalytic Activities for the Oxathioacetalization

Acetalization of Carbonyl Compounds with 2,2,4-Trimethyl-1,3-pentanedio Catalyzed by Novel Carbon Based Solid Acid Catalyst

Brønsted acidic ionic liquids as novel catalysts for Prins reaction

Influence of Acid-Base Properties of ZnMgAl-mixed Oxides for the Synthesis of 1-Methoxy-2-propanol

A novel solid acid for synthesis of bisphenol A

Tunable Synthesis of Propylene Glycol Ether from Methanol and Propylene Oxide under Ambient Pressure

A Supported-Catalyst of Grafting [co(tpa)cl]cl Molecular Catalyst Onto SiO2 Nanoparticles to Achieve Robust Syngas Production in a Photochemical System

MoO3-MCM-41 materials as effective catalysts in Prins reaction of isoprenol with butanal followed by esterification in one-pot reaction arrangement

Zirconium-Modified Cs/SiO2 Catalyst for Synthesis of Methyl Acrylate Via Aldol Condensation of Methyl Acetate with Formaldehyde

Studies on the BF3 • Et2O/MCM-41 Solid Acid Catalyst and Its Catalytic Performance

Synthesis of Precursors to Ethylene Glycol via the Acid-Catalyzed Carbonylation of Formaldehyde

Studies on the Bf3 Center Dot Et2o/Mcm-41 Solid Acid Catalyst and Its Catalytic Performance