Abstract:In order to enhance energy characteristics of propellants in hybrid rocket motors, aluminum particles are added into the solid fuel. However, these particles may lead to nozzle mechanical erosion, which significantly affects the motor performance. This paper intends to study thermochemical and mechanical erosion mechanism of carbon-based nozzles in hybrid rocket motors with aluminum metallized fuel. A firing test is performed, and 95% hydrogen peroxide and hydroxyl-terminated polybutadiene based fuel with aluminum particles are utilized. Experimental results show that many metal particles are ejected from the nozzle, and aluminum oxide deposits heavily on the nozzle inner surface. A method of numerical calculation coupled with two-phase flow, combustion of aluminum metallized fuel, thermochemical ablation reactions, and mechanical erosion is established. The errors of combustion chamber pressure and throat erosion rate between numerical calculation and test results are 0.53% and 7.76%, respectively. Simulation results indicate that with the increase of aluminum content, nozzle wall pressure gradually increases, while the mass fraction of H 2 O, CO 2 , OH, and O declines. The nozzle wall temperature and thermochemical erosion rate raise first and then reduce as aluminum content increases. The mechanical erosion is mainly distributed in the convergent section, and it raises with the increase of aluminum content. When aluminum content is up to 38%, the maximum mechanical and thermochemical erosion rates are 0.09185 mm/s and 0.0976 mm/s, respectively. This reveals that effects of mechanical erosion on hybrid rocket nozzles should be carefully considered and evaluated under conditions of high aluminum content.

Study on the Possibility of the Application of Metal Matrix Composites on Extendible Exit Cone Nozzles

A Physically-Based Plastic Constitutive Model Considering Nanoparticle Cluster Effect for Metal Matrix Nanocomposites

Research Progress of CMC Used in Rocket Motor Nozzle and Nozzle Throat

Research on energy-absorption and failure of carbon fiber reinforced epoxy resins double cone structure

Large-diameter Metal Matrix Composite Lattice Truss Sandwich Cylinder: Additive Manufacturing, Testing and Analyzing

Probabilistic Reliability Analysis of Carbon/Carbon Composite Nozzle Cones with Uncertain Parameters

Analysis of stress and strength of filament wound solid rocket motor case

Recent Applications Of Metal Matrix Composites In Precision Instruments And Optical Systems

Effects of non-uniform needled microstructure on failure mechanisms of 3D needled composites thick-walled cylinder under axial compression and internal pressure

A Dual-scale Model for Estimating the Ablation Rate of C/C Composite Nozzle

Parametric Influences of Geometric Dimensions on High Temperature Mechanical Behaviors and Damage Mechanisms of Ceramic Matrix Composite and Superalloy Double Bolted Joints

Experimental and numerical investigation on thermochemical erosion and mechanical erosion of carbon-based nozzles in hybrid rocket motors

A Numerical Study on Carbon-Fiber-Reinforced Composite Cylindrical Skirts for Solid Propeller Rockets

Physical and Numerical Simulation Study on Structure Optimization of the Inner Wall of Submerged Entry Nozzle for Continuous Casting of Molten Steel

Experimental Investigations on the Mechanical Performances of Auxetic Metal-Ceramic Hybrid Lattice under Quasi-Static Compression and Dynamic Ballistic Loading

Progress of Metal Matrix Composites for Efficient Thermal Management Applications

Free Vibration and Axial Compression of All-Metallic Cylindrical and Truncated Conical Sandwich Shells with Corrugated Cores

Numerical study of heat transfer and load-bearing performances of corrugated sandwich structure with open-cell metal foam

Multifunctional Metal Matrix Composites by Friction Stir Additive Manufacturing

A Review on Ceramic Matrix Composites and Environmental Barrier Coatings for Aero-Engine: Material Development and Failure Analysis

Review of the Mechanical Properties and Numerical Simulation of Composite Solid Propellants