Wavelets Analysis of Signal Singularity

LIANG Ya-ping,WANG Hui-zhen,REN Xing-min

DOI: https://doi.org/10.3969/j.issn.1673-9728.2005.03.179

2005-01-01

Abstract:Quantitative analysis of the signal singularity based on wavelets has been given in this paper.The local ability. the classifying ability of signal singularity and computing ability of the Lipschitz exponents have been discussed.

What problem does this paper attempt to address?

Signal Wavelet Analysis in Ultrasonic Image

JQ MO,XJ ZHOU,YD CHENG,J QI,YL CHENG

DOI: https://doi.org/10.1007/978-1-4615-2958-3_10

1993-01-01

Abstract:The detection and analysis of the singularity of a signal is extended into the field of acoustic signal analysis. In processing of sonic signals with abrupt changes, e. g., of ultrasonic reflected pulse signal the usages of signal processing methods of pure time or frequency domain are limited because of the singularity of these kinds of signals. In this paper, Wavelet Transform (WT) , a time-frequency domain analysis method, is employed as a basic tool for A-mode ultrasonic signals feature extraction. And an implemental algorithm for generating of B-mode ultrasonic image based on zero-crossing detection of odd WT and quantification of even WT is also presented. In the end of the paper, a practical experiment example is given.
Singularity Detection and Feature Extraction Based on Analytic Wavelet Transform

PANG Mao,ZHOU Xiao-jun,HU Hong-wei,MENG Qing-hua

DOI: https://doi.org/10.3785/j.issn.1008-973x.2006.11.033

2006-01-01

Abstract:A singularity detection and denoising method based on analytic wavelet transform(AWT) and signal reconstruction was proposed to improve the accuracy of signal singularity detection and the efficiency of fault diagnosis.According to the difference of propagation characteristics of wavelet transform modulus maximum(WTMM) of signal and noise along the scale direction,signal denoising and fault feature extraction were realized.Singularity detection and denoising based on AWT was applied to the vibration signals of running machines.Signals sampled under several conditions in a main reducer performance test bed were analyzed,and the fault diagnosis of the main reducer was conducted by analytic WTMM and real WTMM respectively.Experimental results show that the singularity detection using the modulus maximum of an analytic wavelet is better than that of a real wavelet,and that the fault feature can be distinguished more obviously and accurately.
Singularity Exponent from Wavelet-Based Multiscale Analysis: A New Seismic Attribute

CF Li,C Liner

DOI: https://doi.org/10.1002/cjg2.735

2005-01-01

Chinese Journal of Geophysics

Abstract:Seismic interpretation is traditionally based on reflection or amplitude. However, amplitude can also disguise the true nature of subsurface geology and blur stratigraphy boundaries. In many cases important information is carried by singularities that are not necessarily associated to a certain amplitude pattern. We present the Holder exponent ( a) as a new seismic attribute which captures locations and strengths of irregularities in data. The Holder exponent ( a) is a measure of singularity strength defined at or around a point. Higher a indicates a higher degree of regularity. We demonstrate that a is a natural attribute for delineating stratigraphy boundaries due to its excellent ability in detecting detailed geologic features from seismic data. We test our concept and wavelet - based multiscale analyzing algorithm on both synthetic and seismic data, and show that a improves our ability in the delineation of stratigraphy layers that would be otherwise vague in the original amplitude display. a has the potential to bring a major breakthrough in seismic data interpretation.
Application of Wavelet Analysis in the Signal Processing

Youwei Du

2010-01-01

Abstract:In the detection of signal singularity,the signal was decomposed by multi-scale wavelet at first,and each sub-band coefficient of the signal was obtained.Then the high-frequency parts was reconstructed,and the location of maximum modulus points was determined,so the location of the signal singularity was determined.The voltage signal containing the fault information was detected in the case,and the re sults show that the details of part of the signal decomposition can clearly show the exact location of singular points.In the course of signal de-noising,the signal was analyzed by multi-scale wavelet at first,and each sub-band of signal was obtained.Then the high frequency subband were processed by the threshold setting method,and the processed signal was reconstructed next.The polluted voltage signal was denoised in the case,and the results show that threshold selection is directly related to the quality of de-noising.
Singular Signal Feature Extraction and Identification Based on Empirical Orthogonal Function for Module Maxim and Phase Matrix of Wavelet

Gui-guo LIU,Bao-hai HAN,Dao HUANG

DOI: https://doi.org/10.3969/j.issn.1006-3080.2007.06.025

2007-01-01

Abstract:The singular signal feature extraction and identification based on empirical orthogonal function for module maximum and phase matrix of wavelet is proposed. By using the method, the singular characteristic value vector and the plot of maximum and phase are obtained as the signal feature. The experiments on the application of fault diagnosis for rolling bearings shows that singular characteristic value vector has the merit of time translation invariability, the plot of denoised module maximum and phase matrix of wavelet clearly reflects the singular feature of vibration.
Selection of Vanishing Moments of Wavelet in Denoising the Signal with Singularity

JIAN Tao,HE You,SU Feng,QU Chang-wen

DOI: https://doi.org/10.3969/j.issn.1672-2337.2006.01.007

2006-01-01

Abstract:The wavelet transform modular maximum of signal corresponds to the singularity of signal.Because the wavelet transform modular maximum of signal is contrary to one of noise on different scales,the noise can be eliminated from the signal.The relationship between vanishing moments of wavelet and Lipschitz exponent of signal is discussed.Then the influence of vanishing moments on the detection of signal with singularity is analyzed.The experimental results show that it is necessary to choose appropriate wavelets with different vanishing moments to detect effectively signals with different singularities.
Wavelet Multifractal Approaches for Singularity Analysis of Vibration Signals

Z Peng,Y He,D Guo,F Chu

DOI: https://doi.org/10.4028/www.scientific.net/kem.245-246.565

2003-01-01

Abstract:For rotating machinery, there may exist many kinds of malfunctions that will influence the normal operation, such as oil whirl, coupling misalignment, rub-impact etc, whose vibration signals often have different singularity properties. The multifractal spectrum, also called singularity spectrum, calculated by the wavelet transform modulus-maxima (WTMM) method is a comprehensive reflection of the distribution of the singularities of signals. In this paper, the WTMM method for multifractal spectrum is introduced, and the multifractal spectra are used to analyze the experimental data of rub-impact, oil whirl, coupling misalignment and imbalance faults. The results show that the vibration signals of the rub-impact have the strongest singularity; the signals of the coupling misalignment are the next and the signals of the imbalance have the weakest singularity. It means that some features can be extracted from the multifractal spectra for fault diagnosis.
Singularity analysis of the vibration signals by means of wavelet modulus maximal method

Z.K. Peng,F.L. Chu,Peter W. Tse

DOI: https://doi.org/10.1016/j.ymssp.2005.12.005

IF: 8.4

2007-01-01

Mechanical Systems and Signal Processing

Abstract:Machine fault diagnosis is vital for safe services and non-interrupted production. The key issue in fault diagnosis is the pattern recognition. A set of valid features will simplify the classifying operations and enhance the accuracy in diagnosis. In this paper, a novel singularity based fault features is presented. Vibration signals collected under different machine health conditions will show different patterns of singularities that can be measured quantitatively by the Lipschitz exponents. The wavelet transforms modulus maximal (WTMM) method provides a simple but accurate method in calculating the Lipschitz exponents. Therefore, the WTMM based Lipschitz exponent calculation as well as the method to select the appropriate wavelet function for WTMM and its range of scale are introduced. Three parameters about the singularity analysis are recommended. They are the number of Lipschitz exponents per rotation N¯, the mean value μα and the relative standard deviation s¯α of the Lipschitz exponents that are obtained from the extracted features. To verify the usefulness of the proposed methods, simulated signals and vibration signals generated by four types of faults commonly occurred in a rotating machine, including the imbalance, the oil whirl, the coupling misalignment and the rub-impact, had been used for testing purpose. The results show that the signal from the rub-impact possesses the highest singular value and the widest range of singularity. The signal of the coupling misalignment ranked the second. Whilst, the signal of imbalance is more regular or having the smallest singular value and the narrowest range of singularity. The results also prove that the three parameters are excellent fault features for pattern recognition as they can well separate the four fault patterns.
Singularity Detection Using AWT with Application to Fault Diagnosis

Pang Mao,Yang Chen-long,Zhou Xiao-jun

DOI: https://doi.org/10.1109/cisp.2008.416

2008-01-01

Abstract:Singularity analysis of vibration signal is an effective method for mechanical fault diagnosis. Signal singularities can be characterized by its wavelet transforms modulus. Real wavelets are generally adopted in analysis. In fact, analytic wavelet transform (AWT) only reflects positive frequencies of signal and its modulus oscillation is weaker than real wavelet transform (RWT), so signal singularities can be detected more accurately. Singularities detection and de-noise based AWT are applied to vibration signals of running machines. Signals are analyzed by this method sampled under several conditions in a main reducer performance test bed developed by us. Experiment results show that singularity detection using the modulus maximum of an analytic wavelet is better than that of a real wavelet. The fault feature can be distinguished from the reconstructing signals more easily, which makes for fault features extraction.
Harmonic Wavelet Package Method Used to Extract Fault Signal of a Rotation Machinery

张文斌,周晓军,林勇,李俊生,沈路

DOI: https://doi.org/10.3969/j.issn.1000-3835.2009.03.020

2009-01-01

Abstract:Singular non-stable signal will occur when a rotating machinery has some faults.Hence,it is important to detect singularities of signals for condition monitoring and fault pre-diagnosis of a machinery.Based on partial decomposition in frequency domain,harmonic wavelet package method was used to analyze the simulated signal and diagnosis the practical rub faults of a rotor,it revealed the ability of harmonic wavelet analysis in arbitrary detail of frequency area.It was shown that harmonic wavelet package method has many advantages over other wavelets.The satisfied results were verified by tests.This provided a new method for fault signal analysis of a rotating machinery.
Wavelet Fault Detection Based on Filtering Pretreatment

Guangzhou Zhao

2007-01-01

Abstract:Noise degrades most existing fault detection methods based on singularity analysis.A method based on wavelet module maxima of the pretreated electric signal is proposed.As wavelet module maxima occur at peaks of signal,the pretreatment removes power frequency periodic components from electric signal and thus avoids misjudgments of fault.Wavelet transform decomposes fault component and noise into different scale spaces,which guarantees the abstraction of fault signature and the de-noising performance.The simplified Mallat singularity detection method not only reduces the computational complexity,but also keeps the localization accuracy.Simulations show that the fault detection method is precise for fault locating and insensible to noise.The method can also be applied to other periodic signal analysis.
Singularity Analysis of the Integral Equation for Three Dimension Vector Fields Scattering

Hao-gang WANG,Zai-ping NIE

DOI: https://doi.org/10.3321/j.issn:0372-2112.1999.12.018

1999-01-01

Abstract:In this paper, the singularity in the integrand of electrical field integral equation (EFIE) for 3-dimensionalvector fields scattering is first analyzed. Two numerical metods for solving the singularity integral equation are developed.One method is the singularity transferring method for calculating integral value containing O(1/R) singularity in its integrand[1];. The other singularity is removed first and the integral contribution of this small area is proved to be zero. Thus, theintegral on the whole integral area can be calculated properly by using numberical method.
Wavelet analysis [for signal processing]

A. Bruce,D. Donoho,H.-Y. Gao

DOI: https://doi.org/10.1109/6.540087

IF: 3.578

1996-10-01

IEEE Spectrum

Abstract:As every engineering student knows, any signal can be portrayed as an overlay of sinusoidal waveforms of assorted frequencies. But while classical analysis copes superbly with naturally occurring sinusoidal behavior-the kind seen in speech signals-it is ill-suited to representing signals with discontinuities, such as the edges of features in images. Latterly, another powerful concept has swept applied mathematics and engineering research: wavelet analysis. In contrast to a Fourier sinusoid, which oscillates forever, a wavelet is localized in time-it lasts for only a few cycles. Like Fourier analysis, however, wavelet analysis uses an algorithm to decompose a signal into simpler elements. Here, the authors describe how localized waveforms are powerful building blocks for signal analysis and rapid prototyping-and how they are now available in software toolkits.

engineering, electrical & electronic
Filtering the Finite Impulse Signals Using Biorthogonal Wavelets

赵维俊,田钢,石战结

DOI: https://doi.org/10.3969/j.issn.1004-5589.2002.04.012

2002-01-01

Abstract:Wavelet analysis is a time-frequency analysis method, which assume multiple resolution and multiple analysis characteristics. Moreover, it has the function of characterization of localization of signal. Therefore, it is credited with telescope in the mathematics. Compact-support orthogonal wavelets have linear phase except the Haar wavelet, so th finite impulse signal is decomposed and reconstructed using biorthogonal wavelets by Mallat algorithm. Basing on the principle of the principle of wavelet transform equivalent to band-pass filer in fequency domain, it is filtered using wavelet transform in the time domain. A mathematical model is attained to demonstrate it. Results illustrate that the unwanted waveforms are basically suppressed. In the case the order problem of biorthogonal spline wavelets is discussed.
Singularity recognization of vibration signal based on Hermitian wavelet for diagnosis

Yanyang Zi,Qingxiang Li,Zhengjia He

DOI: https://doi.org/10.1117/12.521526

2003-01-01

Abstract:The vibration signal in the nature of singularity is always caused by mechanical fault of equipment. It is important to recognize the signal singularity correctly for mechanical fault diagnosis. The complex Hermitian wavelet is constructed by means of the first and the second derivatives of the Gaussian function to detect signal singularities. The Hermitian wavelet has a real Fourier transform that will not mix the signal phase with its filter phase, and its real part and imaginary part have less oscillation than Morlet wavelet, so that the convolution operation can be process with fewer number of data points and the signal singularity will not be smeared. The time-scale amplitude plot and phase plot based on Hermitian wavelet are presented to detect signal singularities. A successful application has been obtained in diagnosis of large air compressor gearbox. According to the singularities extracted from amplitude plot and phase plot of gearbox vibration signals, it is obvious that there existed impact rub fault that caused intense vibration in the gearbox. After justified maintenance the compressor gearbox runs smoothly in a good condition.
Detection And Characterization Of Cusp Singularities

SELİN BÜYÜKTAŞ,DENİZ KARAÇOR

DOI: https://doi.org/10.1142/s0218348x24500890

2024-06-20

Fractals

Abstract:Fractals, Ahead of Print. Studies on nonlinear analysis of system dynamics have increased in recent years. Since most systems that exist in nature have complex dynamics and therefore exhibit nonlinear behavior; there are various methods and theories developed in this context. Self-similar functions are mathematical functions exhibiting self-similar and scale-invariant behaviors performing fractal structures. Singularities are the basis for producing the self-similar behavior of these functions. Singularity analysis is mainly carried out by using wavelet transform (WT). The cusp singularities are non-oscillating singularities which are characterized by their singularity strength. However, the representation and behavior of this type of singularity differs depending on the sign of the exponent, known as the singularity strength. The cusp singularity functions with negative exponent show irregular behavior progressively different than positively valued functions since the value of the function is undefined at that particular singular point. It is commonly accepted that the singularity strength is studied as Hölder exponent of the cusp function, but by definition, the value of this exponent cannot take negative values. We present a new method to estimate the singularity strength of cusp singularities with negative exponent. The developed method is based on analyzing and redistributing the amplitudes of a cusp function with negative exponent by taking the WT. The redistribution of amplitudes over time is achieved by applying curve fitting process to frequency values of the analyzing function.

mathematics, interdisciplinary applications,multidisciplinary sciences
Step Singularity Detection and Analyzing of Rolling Force in Skin Pass Mill Based on Wavelet Analysis

LI Hao,KONG Xiangdong,AI Chao

DOI: https://doi.org/10.3969/j.issn.1001-3881.2011.13.006

2011-01-01

Abstract:Step singularity of rolling force in skin pass mill is a kind of vital important data for troubleshooting and system analyzing of rolling force control system.Wavelet analysis was adopted for step singularity detecting,positioning and analyzing of skin pass mill rolling force control system.The singularity detecting method based on wavelet analysis was discussed,and the wavelet function was determined.With the processing of real rolling force data based on wavelet analysis of a skin pass mill,the correctness and effectiveness of the above method are proved.
RESEARCH ON TURBINE CAVITATION TESTING BASED ON WAVELET SINGULARITY DETECTION

PU Zhong-qi,ZHANG Wei,SHI Ke-Ren,WU Yu-lin

DOI: https://doi.org/10.3321/j.issn:0258-8013.2005.08.019

2005-01-01

Abstract:Cavitation is the main harm in turbine, which is difficult to avoid. Power Spectrum analysis is always used in spectrum analysis of cavitation noise. However, it is obviously unfit for research on the transient signal such as cavitation noise. Wavelet transform is just localized, which is popularly used in detection and localization of singularity. Methods of turbine cavitation testing based on wavelet singularity detection are presented in this paper. At the same time, mother wavelet option methods and determined conditions are presented. The computation of the methods is simpler than ever methods based on detection of modulus maxima of wavelet transform. The methods of turbine cavitation testing are used in real data analysis and it is proved that the methods are effective and incipient cavitation and change of cavitation pattern can both be detected effectively.
The Singularity of a Differential Equation

Tao CHENG,Yue-ming KANG,Jun WANG

DOI: https://doi.org/10.3969/j.issn.0427-7104.2006.02.018

2006-01-01

Abstract:The singularity of a kind of differential equation is investigated,and the possible forms of the solution and possible form of coefficients in the equation are obtained.
Unique wavelet sign retrieval from samples without bandlimiting

Rima Alaifari,Francesca Bartolucci,Matthias Wellershoff

2024-07-02

Abstract:We study the problem of recovering a signal from magnitudes of its wavelet frame coefficients when the analyzing wavelet is real-valued. We show that every real-valued signal can be uniquely recovered, up to global sign, from its multi-wavelet frame coefficients \[ \{\lvert \mathcal{W}_{\phi_i} f(\alpha^{m}\beta n,\alpha^{m}) \rvert: i\in\{1,2,3\}, m,n\in\mathbb{Z}\} \] for every $\alpha>1,\beta>0$ with $\beta\ln(\alpha)\leq 4\pi/(1+4p)$, $p>0$, when the three wavelets $\phi_i$ are suitable linear combinations of the Poisson wavelet $P_p$ of order $p$ and its Hilbert transform $\mathscr{H}P_p$. For complex-valued signals we find that this is not possible for any choice of the parameters $\alpha>1,\beta>0$, and for any window. In contrast to the existing literature on wavelet sign retrieval, our uniqueness results do not require any bandlimiting constraints or other a priori knowledge on the real-valued signals to guarantee their unique recovery from the absolute values of their wavelet coefficients.

Functional Analysis

Wavelets Analysis of Signal Singularity

Signal Wavelet Analysis in Ultrasonic Image

Singularity Detection and Feature Extraction Based on Analytic Wavelet Transform

Singularity Exponent from Wavelet-Based Multiscale Analysis: A New Seismic Attribute

Application of Wavelet Analysis in the Signal Processing

Singular Signal Feature Extraction and Identification Based on Empirical Orthogonal Function for Module Maxim and Phase Matrix of Wavelet

Selection of Vanishing Moments of Wavelet in Denoising the Signal with Singularity

Wavelet Multifractal Approaches for Singularity Analysis of Vibration Signals

Singularity analysis of the vibration signals by means of wavelet modulus maximal method

Singularity Detection Using AWT with Application to Fault Diagnosis

Harmonic Wavelet Package Method Used to Extract Fault Signal of a Rotation Machinery

Wavelet Fault Detection Based on Filtering Pretreatment

Singularity Analysis of the Integral Equation for Three Dimension Vector Fields Scattering

Wavelet analysis [for signal processing]

Filtering the Finite Impulse Signals Using Biorthogonal Wavelets

Singularity recognization of vibration signal based on Hermitian wavelet for diagnosis

Detection And Characterization Of Cusp Singularities

Step Singularity Detection and Analyzing of Rolling Force in Skin Pass Mill Based on Wavelet Analysis

RESEARCH ON TURBINE CAVITATION TESTING BASED ON WAVELET SINGULARITY DETECTION

The Singularity of a Differential Equation

Unique wavelet sign retrieval from samples without bandlimiting