Abstract:The paper is aimed to present its methods for preparing four kinds of modified activated carbons under the different temperature conditions to protect the nitrogen atmosphere.For the research purpose,we have examined their surface physicochemical properties in a variety of approaches,such as the application of a gas adsorption analyzer,a Boehm titration,a scanning electronmicroscope (SEM) and the Fourier trans tormed infrared spectroscopy (FTIR).At the same time,we have also done the isothermal adsorption experiments under the conditions with carbaryl being used as the adsorbate.Besides,this paper has also made an exploration of the associated relation between the adsorption power and the physicochemical properties of the activated carbons.The results of the above experimental studies show that the thermal treatment of the activated carbon is in a position to change the physicochemical properties of its surface.For instance,it can promote the decrease of the oxygen content of the carbon surface and the acidic functional groups whereas the surface area and the basic composition of the activated carbons can help to increase themselves significantly,too.Moreover,the SEM analysis indicates that the pore number and volume can be found increased due to the activated carbons expansion with the rising of the temperature.What is more,the analysis results of FTIR experiment prove to be consistent with the results of the Boehm titration.In addition,the adsorption capacity of the activated carbons has been found strongly correlated with their surface area,pore volume,and the surface acidic functional groups while the oxygen content of the surface area and pore volume can help to improve the adsorption capacity of the activated carbons.On the contrary,the acidic functional groups and the oxygen content just behave oppositely.More exactly speaking,the experimental data indicate that the optimal modification temperature should be set up at 600℃.The adsorption behavior of the activated carbons has also been found consistent with the pseudo-second-order kinetic model and that of the Langmuir isotherm.And,finally,the adsorption capacity of all kinds of adsorbents proves to be greater than 8 kJ/mol,signifying that the adsorption process has been dominated by the chemical adsorption.The fitting data of the intraparticle diffusion reveals that the adsorption rate of the activated carbons is not rn()erely controlled in the liquid film diffusion stage.

Adsorption of bisphenol A from aqueous solution onto activated carbons with different modification treatments.

[Study on Adsorption of Bisphenol A from Aqueous Solution on Modified Activated Carbons].

Adsorption Characteristics of Bisphenol-A on Tailored Activated Carbon in Aqueous Solutions

Adsorption of Nitrous Oxide on Activated Carbons

On the Adsorption Capability of Powder Activated Carbon for Phenol

Removal of bisphenol A by Fe-impregnated activated carbons

Effect of Surface Modification of Activated Carbon on Its Adsorption Capacity for Bromate

Study on the adsorption capacity of furfuryl alcohol based mesoporous carbon for bisphenol-A in water

Nitrogen-doped Oxidized Activated Carbon As Efficient Metal-Free Bifunctional Material for Bisphenol Removal: A Tuning of Surface Chemistry

Study on Adsorption of Bromate from Aqueous Solution on Modified Activated Carbon

Adsorption of Polychlorinated Dibenzo-P-dioxins/dibenzofurans on Activated Carbon from Hexane.

Amination of Activated Carbon for Enhancing Phenol Adsorption: Effect of Nitrogen-Containing Functional Groups

Adsorption of Carbon Dioxide on Organically Functionalized Sba-16

Adsorption of Phenol on Commercial Activated Carbons: Modelling and Interpretation

On the adsorptive performance of carbaryl onto the activated carbons with the thermal treatment

Adsorption Properties of Modified Activated Carbon for 2-Dichloroethane

Adsorption of Acetone and Isopropanol on Organic Acid Modified Activated Carbons

Removal of bromate from water using modified activated carbon

Title : Effect of Na + impregnated activated carbon on the adsorption of NH 4 +-N from aqueous solution

Removal of Bisphenol S (BPS) by Adsorption on Activated Carbons Commercialized in Brazil

Adsorption Isotherm, Kinetic and Mechanism Studies of Some Substituted Phenols on Activated Carbon Fibers