Abstract:Currently, a neutral beam injection (NBI) system prototype with a 200-keV negative ion source, called the negative neutral beam injection (NNBI) system, is under construction for the China Fusion Engineering Test Reactor Project. In the NNBI system, the calorimeter is an extremely important high-heat-flux component, and its panels have to withstand a heat flux density of up to dozens of MW/m(2) under some extreme conditions; thus, its efficient heat transfer enhancement design and the corresponding supporting structural design are most important, especially under the condition of a 3600-s long pulse. According to the detailed design requirements of the NNBI system, an overall design scheme of the calorimeter based on the heat transfer enhancement structure of the swirl tube (SW for short) is proposed in this paper. By using the gas-liquid two-phase flow boiling model and the supporting structure's finite element model, the heat transfer performance of the heat exchange module, the mass flow distribution and pressure drop of the entire cooling circuit of the component, and the strength of the support structure are evaluated to verify the feasibility of the design scheme. Finally, based on the proposed design scheme, the detailed design of the temperature monitor system, which has high reliability and economy, is completed. This research provides important theoretical and engineering support for the structural development of the calorimeter for the NNBI verification prototype and will also provide references for the design and development of other internal components of large-scale fusion devices.

An RFQ Calibration System for L3 BGO Calorimeter

The Performance of an L3 Hadron Calorimeter Prototype Module with BGO

Commissioning of the FRIB RFQ

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

An Ecr Oxygen Source And A Lebt System Developed For 1mev Isr Rfq Accelerator Upgrade

Beam Commissioning of the Coupled RFQ-SFRFQ Cavity

The low-temperature energy calibration system for the CUORE bolometer array

Beam Experiments on the RFQ and SFRFQ Combined Accelerator System

The beam commissioning of a CW high charge state heavy ion RFQ

Absolute energy calibration with the neutron-activated liquid-source system at BABAR's CsI(Tl) calorimeter

Separated Function Rfq Beam Dynamics Design and Commissioning

Development of the Heavy Ion RFQ for CAFE2

Radioactive Source Calibration Technique for the CMS Hadron Calorimeter

Design and Cold Measurements of a Coupled RFQ-SFRFQ Cavity

Power Test of the Ladder Ih-Rfq Accelerator at Peking University

Progress in the Beam Commissioning of Separated Function RFQ Accelerator

Design and Verification of Calorimeter for CFETR Neutral Beam Injection System Prototype with Negative Ion Source

A Compact RFQ Cooler Buncher for CRIS Experiments

RF and Field Measurements of the SSC-LINAC RFQ

Calibration of RPC-based muon detector at BESIII