Abstract:In hot and humid tropical countries, the air-conditioning system has a high energy usage in commercial buildings. This study introduces a static balance duct design method for a temperature dependent variable air volume system. Ducts are looped together, which cause the air to self-balance and minimize the pressure loss across the duct network. The static balance duct network can easily identify the critical zone of highest pressure loss. This zone appears at the longest duct length from the air source and is always consistent for different load conditions. The air supplied to this critical zone is controlled by the zone temperature sensor, which directs feedback to the variable frequency drive fan of the air-handling unit. The rest of the variable air volume terminal units are zone temperature controlled. The duct looping design mitigates the problems in pressure variations and complements the temperature dependent control strategy. An open office case study is carried out to demonstrate the merit of the static balance duct design method. An actual installation was completed in a shopping mall. The recorded temperature readings verified that the static balance duct network and temperature dependent variable air volume air-conditioning system is operational and functional. Approximately 27% energy savings is achieved compared to the constant air volume system. Practical application: The static balance duct design method is a combination of equal friction duct design method and a loop duct network. This static balance duct network can identify the critical zone of highest pressure loss and this zone is always consistent. In this temperature-dependent variable air volume (TDVAV), the variable air volume (VAV) terminal unit at the critical zone is eliminated. The zone temperature sensor at the critical zone provides direct feedback to the variable frequency drive fan. All other terminal units are temperature dependent. The static balance TDVAV system enhances energy savings, improves the performance of VAV system and reduces the faults for VAV systems.

Network method for calculation of looped ducting in VAV systems

The Basic Study on Hydraulic Regime Calculation of Hot Water Network by Basic Loop Analytical Method

Static balance duct design method and temperature dependent variable air volume systems

Network flow calculation based on the directional nodal potential method for meshed heating networks

Networks Dividing Wind Algorithm Based on Node Press- Energy

THE METHOD OF CONSTRUCTING LOOPS IN DISTRICT HEATING NETWORKS FOR MINIMIZING TRANSPORTING ENERGY

Study on resistance reduction in a jugular profiled bend based on entropy increase analysis and the field synergy principle

Truncation method for calculating the resistance of ventilation air-conditioning duct systems under nonfully developed flow boundary conditions

A novel online air balancing method for the ventilation duct system via distributed cooperative control

The Influence of Central Regulation Methods Upon Annual Heat Loss in Heating Network

Numerical Study On Indoor Air Distribution For Vav System

Study on Standby Hydraulic of Single-heat-source Single-looped District Heating Network

Nodal-pressure-based Heating Flow Model for Analyzing Heating Networks in Integrated Energy Systems

Loss calculation method for distribution network based on measured data

A Passive Calculation Method for Loop-Closing Current in Distribution Networks Based on Thevenin Theorem

Calculation of the Loop Closing Steady-state Current in Distribution Network by Considering the Branch Load Distribution

An Energy-Saving Oriented Air Balancing Method for Demand Controlled Ventilation Systems with Branch and Black-Box Model

Optimal Dynamic Duct Static Pressure Method in a Multi-Zone Variable Air Volume System

STUDY ON LOOP ANALYSIS THEOREM OF DISTRIBUTION SYSTEM POWER FLOW

Loop Type Conversion and Regulation of Line Flow Violation Based on Loop Analysis

A network model to simulate performance of variable refrigerant volume refrigeration systems