Abstract:Inverted drop test is a dynamic roof crush test which is simple, realistic, reliable and easily implemented. It can produce repeatable roof impacts that can be used to compare one test run with another and has long been used by the automotive industry and researchers to test roof integrity. However, practical full-scale vehicle roof crush tests are always very costly, especially for finding out the impact orientation for the worst structural behaviour. Computer simulation can provide an effective solution, since it is highly repeatable, and under different environmental conditions permits the variation of parameters to evaluate sensitivity. A full-scale Finite Element model of Ford Fiesta that was originally modelled in parts by Ford Motor Company using Radioss code was translated into LS-DYNA3D and refined through extensive employment of better elements and spotwelds formulation. The inverted drop-test simulation, therefore, was made using a combination of different pitch and roll angles in the search of the worst-case rollover condition. These parametric studies show the critical vehicle orientation at roof impact that causes the highest amount of roof crush to be 10 degrees pitch angle and 12.5 degrees roll angle. This is similar to the test conditions employed in the experimental test using a Renault Clio. The results obtained from simulating these two different vehicles show the existence of some design problems, i.e., a very weak roof that is supported by weak roof rails and weak reinforcing plates. Furthermore, the inverted drop-test simulation results depict clearly the differences between static roof crush tests based on FMVSS No. 216 that is loaded along a fixed orientation and only reflects the roof strength, rather than the pillar's strengths, response in that direction. The dynamic test in that sense is more realistic and closer in nature to a number of recorded real-world accidents.

Analysis and Evaluation on General Property of Car Roof Structure

Research on Roof Crush Simulation and Structural Crashworthiness of Passenger Car

Experimental Investigation on Characteristics of Wind Loads on Tilt Membrane Roof

Study on wind-induced dynamic responses and wind tunnel test for a large-span double-layered roof structure

Structural Design of Retractable Roof Structures

Simulation analysis on collision strengths of bus roof in rollover condition

Structure Design and Analysis of Magnesium-Alloy Car Roof Members

Simulation and parametric analysis on movement of radial retractable roof structure

Analysis and Improvement for Key Parts of Car Based on Frontal Crashworthiness Simulation

Sensitivity Analysis on Car Body Structural Modification

THE STRUCTURAL ANALYSIS OF THE GLASS ROOF OF A PROJECT

A Study of the Vehicle Structure Crashworthiness in Dolly and Curb-Trip Rollover Tests

Simulation and Improvement of Safety Performances of a Certain School Bus

Strength and Modal Analysis for Carbody Structure of Overhead Contact System Maintenance Vehicle

Integral structural analysis on the roof of composite reticulated shell

The Structure Strength Analysis on the Internal-Car Body of CRH3

Considering Grid Division Optimization of Free-Form Surface Roof Structure

Assessment of Vehicle Roof Crush Test Protocols Using Fe Models: Inverted Drop Tests Versus Updated Fmvss No. 216

Evaluation Method for Structural Performance of Light Bus Body and Its Applications

Finite Element Analysis on Stability and Strength of Tank Roof with Reinforcing Ribs

SUBSTANTIATION OF THE STRENGTH OF THE CAR BODY BEARING STRUCTURE TAKING INTO ACCOUNT CRITICAL STRESSES IN FLUTES