Abstract:In order to suppress the overpressure and flame damage caused by the explosion of premixed methane-air, a self-built duct with a 10 x 10 x 100 cm was used to conduct an experimental study on the explosive characteristics and propagation rules of 9.5% methane under the effect of different porous materials at a fixed position. The methods of suppressing methane-air explosion in confined space are optimized. By analyzing the effect of porosity and distance of the porous material on the explosion, the overpressure and flame propagation characteristics after the methane-air explosion and under the influence of the dual factors are studied. It provides data support to explain the mechanism of blocking and suppressing premixed methane-air explosion when porous materials with different porosity and different positions. Studies have shown that the different porosity of porous materials and the position from the explosion source have significant and different effects on the propagation of overpressure and flame. The 10 PPI porous material has a strong promoting effect on the overpressure and flame propagation after the explosion, it accelerates the overpressure rising rate and increases the overpressure peak, and enhances the turbulence intensity of the explosion flame and accelerates the flame propagation rate. The 20 PPI porous material failed to suppress the explosion during the acceleration phase, but had certain suppression on the explosion flame in other phases. The effect of 30 PPI porous material to suppress explosion overpressure and flame depends on where it is placed. Both 20 PPI and 30 PPI porous materials can quench the flame and block the propagation of high-temperature carbonaceous products. This research results have theoretical value and guiding significance for the prevention and emergency treatment of methane explosion accidents.

Effect of Air-compressed Explosion on Drying Rate and Permeability of Locust

Study on the moisture uniformity of paddy drying technology by employing air direction reversals.

Experimental Studies on Chopping Cotton Stalk when Compressed to High Densities

Influence of Steam Explosion on Rice Straw Fiber Content

Effect of High Pressure Processing on Moisture Sorption Properties of Brown Rice

Study on Heat and Mass Transfer Performance during Heating, Pressurization and Expansion Stage in Explosion Puffing at Low Temperature and High-Pressure

Influence of Clod Size and Water Content on Gas Permeability of A Compacted Loess

The Effect of Explosion Parameters on Seismic Source Wavelet Calculation and Its Characteristics

Effects of Compressed Air Explosion Treatment on the Permeability of Poplar

The Effect of Micro-Explosion on Average Drying Rate of Poplar

EFFECTS OF MOISTURE ON DRYING RATE OF MICRO- EXPLOSION-PRETREATED FAST-GROWING POPLAR WOOD

Experimental Study on Explosion of Premixed Methane-air with Different Porosity and Distance from Ignition Position

Enhanced Anaerobic Ruminal Degradation of Bulrush through Steam Explosion Pretreatment

EFFECT OF PROCESSING FACTORS OF EXPLOSION PUFFING ON POTATO CHIPS QUALITY

Variation and correlation between water retention capacity and gas permeability of compacted loess overburden during wetting-drying cycles

Experimental research on methane/air explosion inhibition using ultrafine water mist containing methane oxidizing bacteria

Effect of Perlite Content on Performance of Emulsion Explosive in Under-Water Environment

Experimental Research on Single Lignite Particle Drying Process in Hot Gas

Experimental investigation of the pressure characteristics in the dust explosion venting

Experimental Research on the Inhibition of Methane/Coal Dust Hybrid Explosions by the Ultrafine Water Mist

Experimental Study on the Effect of Modified Attapulgite Powder with Different Outlet Blockage Ratios on Methane-Air Explosion