Abstract:In this paper, we report an incoherent space laser beam combiner for rectangular beam combination with 18 fiber-transmitted semiconductor lasers at 972 nm wavelength. The coupled thermo-mechanical properties of all the optical lenses in the combiner were analyzed to evaluate the long-term reliability of the combiner subjected to beyond 10 kW high-power laser irradiation. An experiment-based numerical model was developed on the basis of the multi-beam laser volumetric heat source, and the performance of lenses irradiated by 10 kW combined laser for 1000 s was studied with finite element method (FEM). The maximum temperature among all lenses was 427.27 K which is much lower than the softening point temperature of fused silica material made of lenses. And the 0.1 aperture number corresponding to the maximum thermal deformation of 4.53 µm is much smaller than the conventional optical lens processing tolerance. The maximal stress of 12.73 MPa is far less than the yield stress of 4.5 GPa for the material. The manufactured laser beam combiner realized a highest output power of 10.641 kW at a power combination efficiency of 98.5%, a combination length of 200 mm and a rectangular focal beam spot of 30 mm × 10 mm. Our method provides a valuable choice for realizing fast and flexible laser surface heat treatment.

Flat-top Laser Beam Generated by Coherent Beam Combining of Gaussian Lasers

Coherent Combining of Two Pulsed Solid State Lasers

Generation of the Flat-top beam using convolutional neural networks and Gerchberg-Saxton algorithm

Generation of Flattop Beams from a Distorted Optical Field by the Wavefront Shaping Technique.

All-fiber Laser with Flattop Beam Output Using a Few-Mode Fiber Bragg Grating.

Near-diffraction-limited Flattop Laser Beam Adaptively Generated by Stochastic Parallel Gradient Descent Algorithm.

Mode-locked Laser with Flat-Top Beam Output Based on All Polarization-Maintaining Fiber Structure

Coherent Beam Combination Of A Hexagonal Distributed High Power Fiber Amplifier Array

The Development and the Present Status of the Flat-Topped Beam

10 kW rectangular laser beam generation with incoherent space combiner

Beam Quality Improvement of Coherent Beam Combining by Gradient Power Distribution Hexagonal Tiled-Aperture Large Laser Array

Nonlinear Generation of a Neat Semi-Gaussian Laser Beam with a Transversely Varying Periodically-Poled LiTaO_3 Crystal

High-Efficiency Grating Couplers for Pixel-Level Flat-Top Beam Generation

Flat-Topped Beam Output from A Double-Clad Rectangular Dielectric Waveguide Laser with A High-Index Inner Cladding

Characterizing the shaping, transmission, and amplification of near flat-top Gaussian beams through soft-edged apertures

Space-Incoherent Beam Combining of Rectangular Spot Using 18 Fiber-Transmitted Semiconductor-Laser Beams

Beam Combination of A Radial Laser Array: Flat-Topped Beam

Design and Verification of a Flat-Top Beam Shaper Utilizing Spherical Lenses

Laser Coherent Combination with Circular Array of Airy Beams

Generating a Bessel-Gaussian beam for the application in optical engineering

Analysis of far-field characteristics of spatial coherent beam combining fiber lasers