Abstract:High density polyethylene (HDPE)/polyethylene-block-poly(ethylene glycol) (PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation (TIPS) process using diphenyl ether (DPE) as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry (DSC). By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.

Pervaporation Performance of Polyethylene Glycol Membranes for Separation of Thiophene/heptane Mixtures(i) Effect of PEG/PEI Composite Membrane Preparation Condition

Pervaporation separation of ethyl thioether/heptane mixtures by polyethylene glycol membranes

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Pervaporation Performance of Polydimethylsiloxane/polyetherimide Composite Membrane for Separation of Thiophene/heptane Mixture(ⅰ) Effect of PDMS/PVDF Membrane Preparation Condition

Pervaporation Separation of Thiophene–Heptane Mixtures with Polydimethylsiloxane (PDMS) Membrane for Desulfurization

Pervaporation Performance of Polydimethylsiloxane Membranes for Separation of Benzene/cyclohexane Mixtures

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Preparation and characterization of polyelectrolyte complex membranes bearing alkyl side chains for the pervaporation dehydration of alcohols

Pervaporation Performance of Crosslinked PEG/PVDF Composite Membrane for Separating Cyclohexanol/cyclohexane Mixtures

Preparation and Pervaporation of A Palygorskite/Polyacrylamide Inorganic-Organic Hybrid Membrane for Separating M-/P-Xylene Isomers

Pervaporation performance of polydimethylsiloxane/polyetherimide composite membrane for gasoline desulphurization(III) Scale-up experiment study

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

Preparation and Characterization of PEG/PVDF Composite Membranes and Effects of Solvents on Its Pervaporation Performance in Heptane Desulfurization

Effects of the Extractant on the Hydrophilicity and Performance of High-Density Polyethylene/Polyethylene-B-Poly(Ethylene Glycol) Blend Membranes Prepared Via A Thermally Induced Phase Separation Process

Pervaporation performance of polydimethylsiloxane/polyetherimide composite membrane for gasoline desulphurization(Ⅲ) Scale-up experiment study

Effect of PEG Additives on Properties and Morphologies of Polyetherimide Membranes Prepared by Phase Inversion

I&Ec 104-Preparation And Pervaporation Performances Of Pea-Based Polyurethaneimide (Pui) Membranes To Benzene/Cyclohexane Mixture

Preparation of Hyperbranched Polyethyleneimine Composite Membrane Using Interfacial Polymerization Catalyzed by 4-Dimethylamiopryidine

Effect of coagulation bath on selective separation of PEI-PEG1000 methane dehydration membrane

Pervaporation performance of PDMS composite membranes for separation of ethanol/water mixtures(Ⅱ)and effect of membrane preparation conditions

Influences of extractant on the hydrophilicity and performances of HDPE/PE-b-PEG blend membranes prepared via thermally induced phase separation (TIPS) process