Abstract:The interactions of femtosecond lasers with gold targets were investigated with a numerical method combining molecular dynamics (MD) and the two-temperature model (TTM). Previous works using MD-TTM method did not consider all the thermodynamic parameters and the interatomic potential dependent of the electron temperature simultaneously. Therefore, we developed a LAMMPS function to achieve this. To accurately capture the physics behind the interactions, we also included the electron blast force from free electron pressure and the modified Fourier law with steep electron temperature gradient in our model. For bulk materials, a stress non-reflecting and heat conducting boundary is added between the atomistic and the continuum parts. The modified boundary force in our study greatly reduces the reflectivity of the atomistic-continuum boundary compared with its original form. Our model is the first to consider all these factors simultaneously and manage to predict four femtosecond laser ablation phenomena observed in the experiments. In this dissertation, the thermodynamic parameters in the two-temperature model were extensively explored. We considered three different approaches to calculate these parameters: namely interpolation, ab initio calculation, and analytical expression. We found that simple interpolation between solid state and plasma state could lead to high level of inaccuracy, especially for electron thermal conductivity. Therefore, ab initio calculation and analytical expression were used for the calculation of the thermodynamic parameters in more advanced studies. The effects of electron thermal conductivity and electron-phonon coupling factor on electron and lattice temperatures were analyzed.Our studies considered electron temperature dependent (ETD) and electron temperature independent (ETI) interatomic potentials. The ETI interatomic potential is easier to implement and therefore it is used in our phase change study to investigate the effects of target thickness on melting. Homogeneous melting occurred for thin films, while melting can be observed through the movement of the solid-liquid interface in thick or bulk materials. However, the ETI potential overestimated the bond strength at high temperatures. Therefore, ablation process was studied with the ETD potential. Three ablation mechanisms were found in our simulations at different laser fluences. Short nonthermal ablation was only observed at the ablation threshold. With increasing laser fluence, spallation was then seen. In high laser fluence regime, phase explosion occurred on the surface and coexisted with spallation.Lastly, we researched on the effects of the delay time between two femtosecond laser pulses. Various delay times did not have much influence on melting depth. In low laser fluence regime, with increasing delay time, the target went through nonthermal ablation, to spallation and to no ablation. In high laser fluence regime, longer delay time encouraged phase explosion while suppressed spallation.

Study of flux limiter using Fokker–Planck and fluid simulations of planar laser-driven ablation

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Space-time dependent non-local thermal transport effects on laser ablation dynamics in inertial confinement fusion

Simulation of expansion of aluminum plasmas produced by a small focal spot nanosecond laser irradiation

Effect of non-local transport of hot electrons on the laser-target ablation

Simulations of Femtosecond-Laser Near-Field Ablation Using Nanosphere under Dynamic Excitation

Numerical simulation of electron thermal transport phenomenon

A fractional dual-phase-lag generalized thermoelastic model of ultrashort pulse laser ablation with variable thermal material properties, vaporization and plasma shielding

The numerical simulation of melting and evaporation due to ultrashort pulse laser irradiation

Numerical Simulation of Thin Foils Irradiated by Ultrashort Pulse Laser

Hydrodynamic simulations of metal ablation by femtosecond laser irradiation

Numerical Investigation of Non-Local Electron Transport in Laser-Produced Plasmas

Numerical simulation of copper ablation by ultrashort laser pulses

PHASE CHANGE AND ABLATION STUDY OF METALS BY FEMTOSECOND LASER IRRADIATION USING HYBRID TTM/MD SIMULATIONS

Kinetic Corrections to Heat-flow and Nernst advection for Laser Heated Plasmas

Multiphysics modeling of femtosecond laser-copper interaction: from electron dynamics to plasma eruption

Vaporization effect studying on high-power nanosecond pulsed laser deposition

Quasi-3D Hydrodynamics of the corona region of the laser irradiation of slab

Scaling Laws of Ion Acceleration in Ultrathin Foils Driven by Laser Radiation Pressure

Ablation of solids by femtosecond lasers: Ablation mechanism and ablation thresholds for metals and dielectrics

Nanosecond pulsed laser ablation of silicon—finite element simulation and experimental validation