Abstract:Acoustical materials are usually used for architectural design, ambient noise, and traffic noise to absorb sound. The sound absorption coefficient (SAC) is often used as the performance index of acoustical materials. It is measured using the reverberation room method (RRM) and the impedance tube method (ITM). The sound source of the RRM is a random incidence in various directions, whereas that of the ITM is a normal incident. The SAC measured by the RRM is more extensive, practical, and costly than ITM. Usually, the SAC measured by RRM is used as the commercially available acoustical materials index. However, RRM requires large-area test samples for measurement and a special sound field of reverberation room for test experiments. Therefore, this study aims to use the ITM to measure SAC. The measured SAC, frequency, thickness, and material density were employed as independent variables and substituted in the obtained multiple regression model to predict SAC obtained by RRM. In addition, the measurement characteristics of impedance tubes provide varisized calibers for different frequency ranges to measure a relatively accurate SAC. Based on the abovementioned characteristics, this study proposed a dual-model for estimating the SAC of the reverberation room method to achieve the best-estimated result. After experimental validation, the dual-model estimated result was compared with SAC from the reverberation room method. It was observed that the maximum absolute value of all errors did not exceed 0.16. Most of the absolute errors were below 0.1, proving the accuracy of this method. Therefore, the method proposed in this study can shorten the acoustical material development schedule for manufacturers and save the cost of the development process.

Sound absorption measurements of a large sample based on the short impulse method

Measurement of acoustic properties for passive-material samples using multichannel inverse filter.

Measurement of the absorption coefficient for acoustical coating samples using multi-channel inverse filter

Measurement of the Echo Reduction for Passive Materials Based on Inverse Filtering Technique

Experimental Study on Measuring Reflection Coefficients at Oblique Incidence Using the Inverse Filter

Acoustic Insertion Loss Measurement Using Time Reversal Focusing

Sound absorption coefficient measurement by extracting the first reflected wave in a short tube

Measurements of the normal incidence sound absorption coefficient for Non-standard sized absorbers in impedance tubes

Tuning of Estimated Sound Absorption Coefficient of Materials of Reverberation Room Method

Sound absorption coefficient measurement for various building elements

Estimation of the random incidence sound absorption coefficients of different size rectangular samples

Effects of Sample Length on the Transient Measurement Results of Water Vapor Diffusion Coefficient of Porous Building Materials: A Case Study of Autoclave Aerated Concrete (AAC) with Various Porosities

Measurement of the diffuse field sound absorption using a sound field synthesis method

A new technique for the measurement of the normal incidence absorption coefficient using an impedance tube and a single microphone with fixed position

Measurement of the sound absorption coefficient for an advanced undergraduate physics laboratory

Measuring sound absorption properties of porous materials using a calibrated volume velocity source

In situ sound absorption estimation with the discrete complex image source method

A Method of Measuring Acoustic Absorption Coefficient of a Material Specimen Using a Dynamic Microphone

Determining and Comparison of Sound Absorption Coefficients using Small Reverberation Chamber and Test Tube Methods

Validation study of in situ sound absorption measurement

The measurement of absorption coefficient and acoustic impedance using spherical waves and a transfer function method