The Hybrid Stepping Motor CAD System

LI Ling-juan,LIU Jing-lin,FU Zhao-yang

DOI: https://doi.org/10.3969/j.issn.1004-7018.2006.06.009

2006-01-01

Abstract:In this thesis,a hybrid stepping motor CAD software for Windows operating system is introduced.The system is based on engineering database and alse includes a data-base management system.It is programmed by C++ Builder 6.0.The system's interface is friend and its operation is simple and convenient.

What problem does this paper attempt to address?

Object-oriented Visualization CAD System for DC Motor

QU Li-yan,WU Jian-hua,CHEN Yong-xiao

DOI: https://doi.org/10.3969/j.issn.1004-7018.2000.06.013

2000-01-01

Abstract:A Windows based CAD software for DC motor using object-oriented programming(OOP) language-microsoft visual basic 5.0 and microsoft visual C5.0 is given here.The software has amity interfaces and better function.Besides the basic function of calculating,it includes DBSM,text-edited system,drawing-referred,network,help-online,and so on,with a strong auxiliary function.
Development of Electromagnetic Field Analysis Software of Switched Reluctance Motors Based on ANSYS Platform

LIU Yun-yun,WU Jian-hua,ZHANG Shi-qin

DOI: https://doi.org/10.3969/j.issn.1673-6540.2005.03.001

2005-01-01

Abstract:The electromagnetic field analysis part of switched reluctance motors was developed based on the design software VSRD of the switched reluctance motor(SRM), using DELPHI 7.0, the encapsulating of the ANSYS was implemented. When the parameters of the motor were defined in VSRD, the APDL file was generated automatically, then the calculations for solution were executed by ANSYS in the background, integrating the application software with the ANSYS, the electromagnetic field of SR motor was analyzed successfully.
Host Computer Software Design of Control System of Ultra-magnetostrictive Boring-cutting Processing Non-circular Cylindrical Hole

Yue WANG,Yi-jie WU

DOI: https://doi.org/10.3969/j.issn.1005-2895.2010.06.025

2010-01-01

Abstract:This paper designs the host computer software of control system of ultra-magnetostrictive boring-cutting processing non-circular cylindrical hole.Based on LabVIEW software graphical programming language,a human-computer interface and data pre-processing module are designed,using uniform angle approaching method to handle elliptic curve of non-circular cylindrical hole cross-section.The communication protocol between host computer and slave computer of the control system and the RS-232 serial communication program are designed.
Design of Stepper Motor Subdivision Control System Based on ARM

XU Zu-hua,XIAO Zhi-hua,SU Ze-guang

2006-01-01

Abstract:A stepper motor subdivision control system has been designed in this paper,which is based on ARM7 chip LPC2214 and the LMD18245 electrical machinery special-purpose driver chip.The "linear + sine" wave driver method and the electric current vector constant breadth algorithm is used in this system.The digital wave data is generated by ARM controller,which is converted to corresponding control voltage.The voltage is enlarged by driver chip LMD18245 to drive the two-phase stepper motor.The control sign is input by the keyboard,and the frequency and the subdivided multiple are displayed by liquid crystal.The software based on uCLinux and MiniGUI platform is designed.Multi-purpose control of the stepper motor and 4096 subdivision multiple are realized in the system.
Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

MIAO Xin,LI Ling

DOI: https://doi.org/10.3969/j.issn.1673-6540.2011.02.005

2011-01-01

Abstract:The modeling process of multiphase PMSM variable speed system was expressed in detail based on analyzing the characters of system.Furthermore,the two closed loops control modulation system for the six phase PMSM based on field oriented control were established.Some engineering problems for multiphase PMSM variable speed system also have been discussed,and the circuit of sampling,protection,and fault disposal were designed,moreover,the software of interrupt handling and fault diagnosis were designed.Finally,the simulation result proved the veracity and feasibility of modeling and algorithm above.The hardware circuit was also designed.
Design of a Three-Phase Hybrid Stepping Motor Pulse Subdivision Controller Based on DSP

Gangfeng Yan

2007-01-01

Abstract:Hybrid stepping motor is similar to permanent magnet synchronous motor in functional principle,therefore,it can be controlled by the advanced control technology of permanent magnet synchronous motor.A new control method is obtained from control at aspect of synchronous motor instead of control of phase currency.A three-phase hybrid stepping motor pulse subdivision controller based on TMS320LF2407 DSP is designed based on this theory.
Design of the Control System of Stepping Motor Based on SPCE061A

ZHANG Yong-de,LI Peng

2009-01-01

Abstract:This paper designs an control system to control stepping motor by Sunplus SPCE061A and microcomputer.Using the host computer and the slave computer realizes the control of stepping motor running a variety of ways.The program adopts modular design to achieve every function through PC.This system realized the functions of speed control and direction control of the stepping motors.There are comprehensive functions,steady operation,high reliability and high cost-effectiveness in the system.
Static Torque Analysis and Calculation of Enhanced Hybrid Stepping Motor Based on ANSYS

WANG Huan,LI Xing-gen

DOI: https://doi.org/10.3969/j.issn.1005-2895.2012.01.016

2012-01-01

Abstract:This paper introduced a new type of enhanced hybrid stepping motor,which had radial-magnetizing permanent magnet materials installed in the stator slots.In this paper,three-dimensional magnetic field FEM analysis of the enhanced hybrid stepping motor were carried out by ANSYS software.The FEM analysis results show a good agreement with the lab test results.The results show that the maximum static torque of enhanced hybrid stepping motor is improved over 60% comparing with hybrid stepping motor,and the overall performance of the hybrid stepping motor is greatly improved.
The Study on the Use of Multi-level Microstep Control of a 2-Phase Hybrid Stepping Motor

LIU Fei,LIU Xin-zheng

DOI: https://doi.org/10.3969/j.issn.1001-6848.2007.01.004

2007-01-01

Abstract:A microstep control system of the 2-phase hybrid stepping motor based on DSP and special motor control chip was represented in this paper,the constant torque and multi-level uniform microstep was implemented by software programming,the experimental study was demonstrated on the system.The research on multi-level microstep control indicats that the operation states between two random microstep levels can be changed smoothly by choosing the original balance position for full-step as shifting point.
Design of Five-Phase Hybrid Stepping Motor Reformative Driver Based on MCU

刁红泉,胡伟雄,颜钢锋

DOI: https://doi.org/10.3785/j.issn.1006-754x.2004.01.005

2004-01-01

Journal of Engineering Design

Abstract:Stepping motor is the most popular executive component in high performance textile machinery, especially in the computerised embroidery machine. Five-phase hybrid stepping motor drivers in the computerised embroidery machine have a good many defects such as low frequency torque vibrations, high frequency inadequate torque output and multi power supplies. Combined with theoretical analysis, this paper gives a reformative driver based on analysis of present stepping motor drivers. This driver uses single power supply and three-phase excitation and gives PWM output. The design improves the stability in low frequency and the torque-frequency characteristic in high frequency and it has been applied in the computerised embroidery machine and has achieved a real good effect.
The design and application of brushless DC motor on the control system of elevator door

WANG Fei,ZHAO Guo-jun,XIA Hong-feng

2009-01-01

Abstract:The thesis' main task is to complete the design and development of the control system of elevator door.The driving board of elevator door,which is developed by the author,controls the permanent magnet brushless DC motor to run normally with the 16-bit digital signal controllers(DSC).In the end,it forms the control system of elevator door.
Control Software Design of Stepping Motors for Micro-Operation of Fiber Measuring

WANG Xiao-fang,QIU Shu-Bo

DOI: https://doi.org/10.3969/j.issn.1004-7018.2010.05.018

2010-01-01

Abstract:A control scheme based on PC and data acquisition and control card was provided to apply stepping motors to the positioning control of fiber measuring system more conveniently.Besides,in order to generate pluses of high stability and increase the positioning precision of stepping motor,multithread of Windows and high resolution timer techniques were applied to software designing.In the thesis,software designing process was introduced and control software interface was presented.
Design of Five-Phase Hybrid General-Purpose Stepping Motor Driver Based on MCU

刁红泉,颜钢锋

DOI: https://doi.org/10.3969/j.issn.1671-7147.2004.02.011

2004-01-01

Abstract:Base on the analysis of the defects of present five-phase hybrid stepping motor drivers in computerised embroidery machine such as low frequency torque vibrations, high frequency inadequate torque output, multi power supplies and out of general-purpose, this paper designs a general-purpose stepping motor driver based on MCU. The new driver uses single power supply and three-phase excitation and gives PWM output. The design improves the stability in low frequency and the torque-frequency characteristic in high frequency. Even under the condition without impulse-subdivision, it can excite the motor of 2,3,4 phases. It has been applied in the computerised embroidery machine and has achieved a real good effect.
Development of Open CNC System Software

Qian Cao

2005-01-01

Abstract:This article mainly discusses the research and development of open CNC system software designed by Microsoft Visual C++, Especially discusses the Figure display ,G code disposal , software module of communication between motion control card and PC,communication software module between PC and Frequency Changer through RS485 .In additional,it provides the key program source codes.
An Open-loop Vector Microstepping Drive System of Two Phase Hybrid Stepping Motor Based on DSP

QU Liang,QIU Jianqi,SHI Cenwei

DOI: https://doi.org/10.3969/j.issn.1001-6848.2011.05.016

2011-01-01

Abstract:An open-loop vector microstepping drive system of two phase hybrid stepping motor was built.In order to modulate the current of two phase windings,two H-bridges were controlled by PWM based on DSP in terms of software.Dead time compensation must be added,according to the principle of PWM on DSP.This paper talked about the principle of the system,the frame of the structure and the scheme of realization.From the result,the system has a good performance,and can be easy to control.
Design and Realization of Stepping Motor Drive System Controlled by Single-Chip Microcomputer

Cheng Deng,Erhui Bian,Zhishen Ge

DOI: https://doi.org/10.1007/s11277-022-09534-z

IF: 2.017

2022-02-07

Wireless Personal Communications

Abstract:In order to meet the needs of operation and management of multiple stepping motors in the current Internet of things environment, this paper designed the software and hardware of the stepping motor drive management system under the control of a single-chip microcomputer based on LabVIEW, which is a graphical programming platform developed by National Instruments Corporation of the United States, and tested and verified the functions of the system. The software part of the system transmitted data between the host computer and the driver terminal based on a service cloud platform called Easy-Control, realizing the network real-time online management operation function. In the hardware design, the existing functions of the STM32F407ZGT6 single-chip microcomputer were combined with the the design of the special driver chip LV8726TA to simplify the circuit design of hardware to increase system stability. The comparison demonstrated that the software and hardware of the system were developed on the LabVIEW platform, which had the advantages of high efficiency, short development cycle, low cost, and convenient function expansion. This work provides a scheme for the design and implementation of similar systems.

telecommunications
A Normalized Design for Hybrid Stepper Motor Based on Tooth-Layer Rate Permeance Method

LI Ting-bin,ZHAO Kui,YANG Nan,CHAI Feng

DOI: https://doi.org/10.3969/j.issn.1004-7018.2012.10.011

2012-01-01

Abstract:The tooth-layer rate permeance method was implemented to build a magnetic circuit network model for a hybrid stepper motor.A normalized algorithm was designed based on the magnetic circuit network.By numbering each node of the magnetic circuit network,a normalized nodal-based equation of the network was given,and a general magnetic circuit network for arbitrary number of phase and pole was built.A aided design program for hybrid stepper motor was written by VC++6.0 language with the field-circuit coupled method.Simulations of the torque-angle characteristics of the mentioned four-phase eight-pole motor were run before and after the normalization process.Its accuracy and practicability were validated.
Computer Aided Design System of Remotely Operated Vehicle

YI Hong,ZHANG Yu-fang,LIN Zhou

DOI: https://doi.org/10.3321/j.issn:1006-2467.2000.01.028

2000-01-01

Abstract:This software is developed for the open ROV (remotely operated vehicle) design on Visual Basic 5.0. It is based on AutoCAD 14, a popular CAD tool, and takes advantage of its ActiveX Automation tech and makes use of relation database Access 97 to store the design data. This integrative design idea puts forward a new graphic database manage system which is based on information database and graphic database. It puts a series of functions and modules such as graphic module add -in, weight calculation, center of gravity calculation and system price evaluation. For the CAD second development of ROV, it will take a great deal of effect.
A Clutch Parametric CAD System based on the Pro/E

Mei Qiongfeng,Yan Zhongsheng,Gong Chunquan,Li Qiang,Shen Yu,Liu Yongjie

DOI: https://doi.org/10.3969/j.issn.1004-2539.2009.01.021

2009-01-01

Abstract:A clutch parametric CAD system based on the Pro/E has been investigated. VC + +6.0 were selected as a programming platform . With its advantages the interface of the software was programmed and intelligent design has been achieved. The asynchronous mode of Pro/Toolkit has been applied, so that designer don't need to interact with Pro/E. Object-oriented thinking have been applied in process of software development. Friendly interface is easy to operate. The results reveal that clutch designers can improve design efficiency more than 30% with application of this system.
Design of Sine-wave Current Microstep Drive for Hybrid Stepping Motor

ZHAO Ke,GAO Han-ying,LI Jian-chao,LIU Da-wei

DOI: https://doi.org/10.3969/j.issn.1004-7018.2006.02.008

2006-01-01

Abstract:A control system of three-phase hybrid stepping motor based on AT89C51 is introduced in this paper.With current-tracing PWM method,the current of three-phase windings was controlled to close sinusoidal wave,thus round magnetic field with approximate constant amplitude in the electrical machinery can be formed.By the sine-wave microstep method,resolution ratio of hybrid stepping motor can be improved and low-frequency vibration can be weaken synchronously.

The Hybrid Stepping Motor CAD System

Object-oriented Visualization CAD System for DC Motor

Development of Electromagnetic Field Analysis Software of Switched Reluctance Motors Based on ANSYS Platform

Host Computer Software Design of Control System of Ultra-magnetostrictive Boring-cutting Processing Non-circular Cylindrical Hole

Design of Stepper Motor Subdivision Control System Based on ARM

Modeling and Realization of Multiphase Permanent Magnet Synchronous Motor Variable Speed System

Design of a Three-Phase Hybrid Stepping Motor Pulse Subdivision Controller Based on DSP

Design of the Control System of Stepping Motor Based on SPCE061A

Static Torque Analysis and Calculation of Enhanced Hybrid Stepping Motor Based on ANSYS

The Study on the Use of Multi-level Microstep Control of a 2-Phase Hybrid Stepping Motor

Design of Five-Phase Hybrid Stepping Motor Reformative Driver Based on MCU

The design and application of brushless DC motor on the control system of elevator door

Control Software Design of Stepping Motors for Micro-Operation of Fiber Measuring

Design of Five-Phase Hybrid General-Purpose Stepping Motor Driver Based on MCU

Development of Open CNC System Software

An Open-loop Vector Microstepping Drive System of Two Phase Hybrid Stepping Motor Based on DSP

Design and Realization of Stepping Motor Drive System Controlled by Single-Chip Microcomputer

A Normalized Design for Hybrid Stepper Motor Based on Tooth-Layer Rate Permeance Method

Computer Aided Design System of Remotely Operated Vehicle

A Clutch Parametric CAD System based on the Pro/E

Design of Sine-wave Current Microstep Drive for Hybrid Stepping Motor