Abstract:The traditional cation exchangers used in ion-selective electrodes and optodes are tetraphenylborate derivatives, which are generally adequate for most analytical applications but may in some cases suffer from decomposition by acid hydrolysis, oxidants, and light. Recently, halogenated dodecacarboranes were found to be improved cation exchangers in terms of lipophilicity and chemical stability. This forms the basis for the convenient covalent attachment of the cation exchanger to the polymeric backbone of the sensing material. This is a challenge that has not satisfactorily been solved and which is especially important in view of developing ultraminiaturized sensing arrays. Here, a C-derivative of the closo-dodecacarborane anion (CB11H12-) with a polymerizable group was synthesized as a chemically stable cation exchanger. This new derivative was copolymerized with methyl methacrylate and decyl methacrylate (MMA-DMA) to fabricate a plasticizer-free polymer with cation-exchange properties. This polymer could be conveniently blended with traditional plasticized poly(vinyl chloride) or with noncrosslinked methacrylic polymers to give solvent cast films that appear to be clear and homogeneous and that could be doped with ionophores. Optode leaching experiments supported the covalent grafting of the carborane anions. Ion-selective membranes and optode thin films were evaluated in terms of response function, response time, and selectivity. In all cases, the new material exhibited behavior similar to free tetraphenylborate derivative-based membranes. As a result of these studies, an all-polymeric plasticizer-free calcium-selective membrane was fabricated on the basis of the covalently attached carborane, a recently introduced grafted calcium ionophore, and an MMA-DMA polymer matrix. The resulting ion-selective electrodes showed Nernstian response slopes and rapid response times, demonstrating that covalent grafting of all sensing components is a feasible approach to the development of ion sensors.

All-solid-state sodium-selective electrode based on a calixarene ionophore in a poly(vinyl chloride) membrane with a polypyrrole solid contact

All-solid-state blood calcium sensors based on screen-printed poly(3,4-ethylenedioxythiophene) as the solid contact

All-Solid-State Carbonate-Selective Electrode Based on Screen-Printed Carbon Paste Electrode

All-solid-state Potentiometric Sensor Using Single-Walled Carbon Nanohorns As Transducer

Design and Characterization of Sodium-Selective Optode Membranes Based on the Lipophilic Tetraester of Calix[4]Arene

SELECTIVE ELECTRODE FOR SILVER BASED ON POLYMER MEMBRANES CONTAINING EXOCYCLIC CHALCOGEN ATOMS CALIX[4]ARENE AND CROWN ETHER

New Signal Readout Principle for Solid-Contact Ion-Selective Electrodes

Coulometric Response of H+-Selective Solid-Contact Ion-Selective Electrodes and Its Application in Flexible Sensors

Stable Ion-Selective Electrode Based on Screen Printed Electrode for the Pb 2+ Detection Using Hierarchical Polypyrrole-Cupct Nanowires As the Solid Contact

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Polymeric Membrane Silver-Ion Selective Electrodes Based on Bis(dialkyldithiophosphates)

Single-piece Solid-Contact Ion-Selective Electrodes with Polymer–carbon Nanotube Composites

Potentiometric/time resolved chronopotentiometric sensing for an all-solid-state ion-selective electrode based on MXene/MWCNTs as solid contact

A Ladder Conjugated Polymer Transducer for Solid-Contact Cu2+-selective Electrodes

Development of A Fluorescent Optode Membrane for Sodium Ion Based on the Calix[4]Arene and Tetraphenylporphine

Solid-contact polymeric membrane ion-selective electrodes using a covalent organic framework@reduced graphene oxide composite as ion-to-electron transducer

Direct Potentiometric Bicarbonate/carbon Dioxide Sensing Based on Polymeric Membranes Doped with Selective Meso-Bisubstituted Calix[4]pyrrole Ionophores.

Beryllium-Ion-Selective PEDOT Solid Contact Electrode Based on 9,10-Dinitrobenzo-9-Crown-3-Ether

Improved Lead Sensing Using a Solid-Contact Ion-Selective Electrode with Polymeric Membrane Modified with Carbon Nanofibers and Ionic Liquid Nanocomposite

A copolymerized dodecacarborane anion as covalently attached cation exchanger in ion-selective sensors.

The Influence of the Conditioning Procedure on Potentiometric Characteristics of Solid Contact Calcium-Selective Electrodes in Nanomolar Concentration Solutions