Abstract:The octaammonium chloride salt of octaaminopropyl polyhedral oligomeric silsesquioxane (OapPOSS) was synthesized via the hydrolytic condensation of γ-aminopropyltrimethoxysilane in the methanol solution catalyzed by concentrated hydrochloric acid and was further used as the intercalating agent to modify sodium montmorillonite (MMT). X-ray diffraction (XRD) data indicate that the MMT was successfully intercalated by the ammonium of OapPOSS, as evidenced by the fact that the basal spacing of MMT galleries was expanded from 1.3 to 1.7nm. The intercalation method used here introduced only the octaammonium POSS salt in contrast to the introduction of all hydrolyzed products from γ-aminopropyltriethoxysilane (APTEOS). The POSS-modified MMT was exploited to prepare the epoxy-MMT nanocomposites. Using a two-step technique, the disorderly exfoliated epoxy-MMT nanocomposites were obtained. XRD studies showed that the formation of the nanocomposites in all the cases with the disappearance of the peaks corresponding to the basal spacing of MMT. Transmission electronic microscopy (TEM) was used to investigate the morphology of the nanocomposites and indicates that the nanocomposites are comprised of a random dispersion of intercalated/exfoliated aggregates throughout the matrix. Differential scanning calorimetry (DSC) indicates that the glass transition temperatures of the as-prepared epoxy-MMT nanocomposites remained invariant in comparison with that of the control epoxy when the POSS-MMT content is less than 10wt%. However, the nanocomposite containing 15wt% of POSS-MMT displayed a decreased Tg, which could be attributed to the incomplete curing reaction resulting from the POSS-MMT loading. Thermogravimetric analysis (TGA) shows that the incorporation of POSS-MMT into epoxy networks displayed an apparent improvement in the thermal stability, and the char residue increased with increasing the concentration of POSS-MMT.

Studies on Epoxy Resin/Montmorillonite Nanocomposites Cured with 4,4′-Diamino Diphenyl Ether Diphenyl Ketone

Effects of the Heating Rate and the Amount of Organic Montmorillonite on the Thermal Properties of the Novel Liquid Crystalline Epoxy Nanocomposite

Kinetics of Curing Reaction of Epoxy Resin/Montmorillonite Nanocomposites

Intercalation and Exfoliation Behavior of Epoxy Resin/Curing Agent/Montmorillonite Nanocomposite

Preparation and Curing Reaction Kinetics of Epoxy Resin Containing Biphenyl Structure/Montmorillonite Nanocomposites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

The Curing Behavior and Properties of Diglycidyl Ether of 4,4′-Bis(4-hydroxybenzoyloxy)-3,3′,5,5′-tetramethylbiphenyl and Its Composites with Multi-Wall Carbon Nanotubes

Exploitation of introducing of catalytic centers into layer galleries of layered silicates and related epoxy nanocomposites. I. Epoxy nanocomposites derived from montmorillonite modified with catalytic surfactant-bearing carboxyl groups

Preparation and Characterization of Epoxy/Montmorillonite Nanocomposites

Epoxy Resin Nanocomposites Prepared by Organic Montmorillonite Bearing Carboxyl Groups

NOVEL ORGANIC MODIFICATION OF MONTMORILLONITE BY SOLID-STATE REACTION WITH EPOXY COMPOUND

Effects of Organo-Montmorillonite Dispersion on Thermal Stability of Epoxy Resin Nanocomposites

STRUCTURE AND MECHANICAL PROPERTIES OF NEWLY MODIFIED CLAY/EPOXY NANOCOMPOSITES PREPARED BY BALL MILLING

Study curing of epoxy resin by Isophoronediamine/ Triethylenetetramine and reinforced with montmorillonite and effect on compressive strength

Preparation of epoxy-montmorillonit e nanocomposite and its formation mechanism

Montmorillonite Intercalated by Ammonium of Octaaminopropyl Polyhedral Oligomeric Silsesquioxane and Its Nanocomposites with Epoxy Resin

EFFECT OF CURING AGENTS AND CURING CONDITIONS ON INTERCALATION AND EXFOLIATION BEHAVIOR OF EPOXY/CLAY NANOCOMPOSITE

Cure Kinetics of Epoxy-Based Nanocomposites Analyzed by Avrami Theory of Phase Change

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

STUDY ON PREPARATION AND PROPERTIES OF EPOXY AND ORGANIC MONTMORILLONITE NANOCOMPOSITES CURED BY ANHYDRIDE

Epoxy/Clay Nanocomposites: Further Exfoliation of Newly Modified Clay Induced by Shearing Force of Ball Milling