Abstract:This paper presents a procedure for simplified collapse probability prediction of RC frame buildings when subjected to ground motion intensities commonly used in designing buildings. For this purpose, seismic collapse probability of a range of RC moment resisting frame buildings are assessed at the design basis earthquake (DBE) and the maximum considered earthquake (MCE) levels of seismic intensity by conducting more than a thousand nonlinear response history analyses (NRHA) using a suite of 40 seismic ground motion records. The 13 buildings included in the investigation have different heights (5–15 storeys) and footprints (3–6 bays), are designed to different target maximum inter‐storey drifts (within the code specified limit), and have critical members detailed to sustain different levels of confinement and anti‐buckling demands. The NRHA results consistently demonstrate that the design inter‐storey drift and the anti‐buckling detailing of longitudinal rebars in the critical frame members strongly influence the collapse probability of RC frame buildings. The results also show that while RC frame buildings designed to reach 2.5% (or less) inter‐storey drifts and detailed for ductile seismic performance can successfully avoid collapse at DBE, avoidance of collapse at DBE cannot be guaranteed if RC frames are designed to reach a target drift of more than 2% and not detailed for full ductility. At MCE, collapse probability is found to consistently exceed 10% unless the building is designed to incur no more than 1% plastic drift and the frame members have ductile detailing. Based on the NRHA results of the 13 case study buildings, easy‐to‐use equations relating their seismic collapse probability at MCE with the design drift and a quantifiable measure of ductile detailing are generated and validated by comparing with the collapse probability obtained by NRHA of an independent RC frame building. The proposed equations provide a rapid, yet reasonably reliable tool for performance‐based seismic design of RC frame buildings, and enable designers to estimate seismic collapse probability of RC frame buildings without having to conduct cumbersome NRHA.

A Simplified Method to Determine the Elastic Reaction of RC Frame Structures under Ground Motion

Response Spectra of Two-Story Frames with Racks on the Elastic Floor

Global Seismic Reliability Analysis Of Rc Frame Structure

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Fragility Curves of a RC Frame Building Subjected to Seismic Ground Motions

Research on Earthquake Resistance Behavior of R/C Frame Structures Subjected to Vertical Motion

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

A Simplified Method Of Seismic Response Analysis Of Soil-Underground Structure System

Numerical simulation for pseudo-static test of RC frame structure based on the fiber model

Modified Multi-Support Response Spectrum Analysis of Structures with Multiple Supports under Incoherent Ground Excitation

Equivalent linear model for seismic damage evaluation of single-degree-of-freedom systems representing reinforced concrete structures considering cyclic degradation behavior

Computer Simulation of Three-Dimensional Seismic Responses for RC Frame Structures

Assessment of RC Frame Structure under Different Seismic Condition

SEISMIC ANALYSIS OF MULTI-SPAN CONTINUOUS REINFORCED CONCRETE RIGID-FRAME ARCH-BRIDGE

Seismic global sensitivity analysis of RC frame structures through stochastic response surface methods

A simplified procedure for seismic collapse probability assessment of RC frame buildings

A Practical Multiscale Analysis for Nonlinear Rc Structures Using a Smart Substructure Replacement Strategy

Investigation of Small-Scaled Soil Structure Model under Earthquake Loads Via Small Shaking Table Tests

Seismic Analysis Of R/C Short Column Member With Modified Csmm, Fa-Stm And Ra-Stm Theory

An efficient method based on shear models for structural seismic response prediction considering hysteretic characteristics

Preliminary study on seismic design method of RC frame structure under the excitations of two earthquakes