Abstract:In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. A set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare with the integrating sphere, meet the conditions of fiber position measurement.Using parallel controlled fiber positioner as the spectroscopic receiver is an efficiency observation system for spectra survey, has been used in LAMOST recently, and will be proposed in CFHT and rebuilt telescope Mayall. In the telescope observation, the position of fiber will highly influence the spectra efficient input in the fiber to the spectrograph. When the fibers were back illuminated on the spectra end, they would export light on the positioner end, so the CCD cameras could capture the photo of fiber tip position covered the focal plane, calculates the precise position information by light centroid method and feeds back to control system. After many years on these research, the back illuminated fiber measurement was the best method to acquire the precision position of fibers. In LAMOST, a set of fiber back illuminated system was developed which combined to the low revolution spectro instruments in LAMOST. It could provide uniform light output to the fibers, meet the requirements for the CCD camera measurement and was controlled by high-level observation system which could shut down during the telescope observation. The paper was introduced the back illuminated system design and different test for the light resource. After optimization, the effect illuminated system could compare the integrating sphere, meet the conditions of fiber position measurement.

Development and Test of Scientific CCD Camera for Large Sky Area Multi-object Fiber Spectroscopic Telescope

A Novel Calibration Method of Ccd Camera for Lamost

The Optical Performance of LAMOST Telescope

Design of CCD Test Platform of Scientific Imaging for Wide Field Survey Telescope

A Control System for LAMOST CCD Cameras

Design and Implementation of the General Control of the CCD Cameras on the LAMOST

Atmospheric Dispersion Corrector for the Large Sky Area Multi-Object Fibre Spectroscopic Telescope

The Atmospheric Dispersion Corrector for the Large Sky Area Multi–object Fibre Spectroscopic Telescope (LAMOST)

LAMOST large sky area simulation under real observation time

Back-illuminate Fiber System Research for Multi-Object Fiber Spectroscopic Telescope

Scientific Projects of LAMOST

The Large Sky Area Multi-Object Fibre Spectroscopy Telescope (Lamost) Project

Stady of Large Sky Area Multi-Object Fiber Spectroscopic Telescope--Observatory Control System of Level 0

Design of a Non-vacuum-cooling Compact Scientific CCD Camera

LAMOST CCD camera-control system based on RTS2

Design of a Scientific CMOS Camera for Astronomical Observation

The Measurement System for Fiber Positioning Unit of Lamost

Southern Lamost For All Sky Spectroscopic Survey

The Research of LAMOST Control System Communication Mechanism Based on the Distributed Environment

Design of the Electronic System for a 2×2 Mosaic CCD Camera

Development of Micro-Spectrometer Based on Linear CCD Chip