Abstract:Split Hopkinson pressure bar (SHPB) tests were conducted on pre-rolled AZ31 magnesium alloy at 150–350 ℃ with strain rates of 2150s-1, 3430s-1 and 4160s-1. The mechanical response, microstructural evolution and accommodation mechanism of the pre-rolled AZ31 magnesium alloy under high-speed impact loading were investigated. The twin and shear band are prevailing at low temperature, and the coexistence of twins and recrystallized grains is the dominant microstructure at medium temperature, while at high temperature, dynamic recrystallization (DRX) is almost complete. The increment of temperature reduces the critical condition difference between twinning and DRX, and the recrystallized temperature decreases with increasing strain rate. The mechanical response is related to the competition among the shear band strengthen, the twin strengthen and the fine grain strengthen and determined by the prevailing grain structure. The fine grain strengthen could compensate soften caused by the temperature increase and the reduction of twin and shear band. During high-speed deformation, different twin variants, introduced by pre-rolling, induce different deformation mechanism to accommodate plastic deformation and are in favor for non-basal slip. At low temperature, the high-speed deformation is achieved by twinning, dislocation slip and the following deformation shear band at different deformation stages. At high temperature, the high-speed deformation is realized by twinning and dislocation slip of early deformation stage, transition shear band of medium deformation stage and DRX of final deformation stage.

Effect of Heating-Rate on Failure Temperature of Pre-Loaded Magnesium Alloy

Strain Rate and Temperature Effects on Formability and Microstructure of AZ31B Magnesium Alloy Sheet

Effect of Compression Loading Speeds on the Room Temperature Mechanical Properties of As-Extruded AZ31 Magnesium Alloy

Effects of Heat Treatment and Plastic Deformation on Structure and Properties of Mg-9al-1.2nd-0.45y-0.7zn Mg Alloy

Varying strain rates and elevated temperatures effects on the mechanical properties of AZ31B magnesium alloy

Thermographic Study of AZ31B Magnesium Alloy under Cyclic Loading: Temperature Evolution Analysis and Fatigue Limit Estimation

High Temperature Deformation Behavior of Fine-Grained AZ31 Magnesium Alloy

Effects of Heat Treatments on Microstructure and Properties of AZ81-1Sm-0.6Nd Magnesium Alloy

Effects of High Strain Rate on Mechanical Properties of As-extruded AZ61 Magnesium Alloy

Effect of Heat-Treating on Microstructure and High Cycle Bending Fatigue Behavior of AZ91 and AZE911 Magnesium Alloys

Tensile and Isothermal Fatigue Behaviors of Mg-12gd-3y-0.5zr Alloy at High Temperature

Unveiling the mechanical response and accommodation mechanism of pre-rolled AZ31 magnesium alloy under high-speed impact loading

Effect of Heat Treatment on Microstructures and Mechanical Properties of Sand-Cast Mg–4Y–2Nd–1Gd–0.4Zr Magnesium Alloy

Influence of temperature and strain rate on flow stress behavior of twin-roll cast, rolled and heat-treated AZ31 magnesium alloys

Experimental study on temperature-dependent ratchetting-fatigue interaction of extruded AZ31 magnesium alloy

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Effect of heat treatment on microstructure and mechanical properties of Mg-4Y-1.6Nd-1Sm-0.5Zr alloy

Forming Limits of Magnesium Alloy AZ31B Sheet at Elevated Temperatures

Effect of Heat Treatments on Mechanical Properties and Corrosion Behavior of MgY3Zn2Al Magnesium Alloy

Standard and Strain Path Change Forming Limit Diagrams of AZ31B Magnesium Sheet at Elevated Temperatures

Effect of Strain Rate and Temperature on the Mechanical Behavior of Magnesium Nanocomposites