Abstract:Many hydraulic tools, like hydraulic cylinders and hydraulic artificial muscle joints are operated by adjusting pressure differences between different zones. Typically, the method employed to change the pressure difference is establishing hydraulic bridges and adjusting liquid resistance. While effective, this method's drawback is complex structures. To address this issue, a water-hydraulic pressure difference control valve, integrating two hydraulic bridges, was designed. The static performances including the output pressure difference, the flow rate and the force acting on the valve core were analyzed using AMESim and computational fluid dynamics simulations. Based on the simulation results, a prototype of voice coil motor direct drive pressure difference control valve was manufactured and the corresponding experiments were carried out. The computational fluid dynamics simulation results show that the internal leakage and the through-flow capacity difference between throttling grooves affect the flow field characteristics of the valve. When the pump pressure is 3 MPa and the valve opening is at the middle position, the internal leakage increases the flow rate from 2.25 L/min to 2.38 L/min, and the through-flow capacity difference reduces the control port pressure from the theoretical analysis of 1.5 MPa to 1.41 MPa. Furthermore, combined with the analysis of the external liquid resistance, the AMESim model of the pressure difference control valve is modified. When the pump pressure is 3 MPa, the pressure difference and flow rate average deviations between the modified AMESim model and the experiment are 0.021 MPa and 0.048 L /min. Finally, a rotational angle experiment for a water hydraulic artificial muscle joints showed satisfactory control effects, suggesting the valve's application in controlling hydraulic tools and actuators.

Pressure Field Analysis of Continuous Rotary Electro-Hydraulic Servo Motor Based on ADINA

Analysis of force and leakage in water hydraulic motor' s piston pairs

Research on Performance and Structure Optimization of Continuous Rotary Electro-hydraulic Servomotor Based on ADINA

Design and Optimization of Self-Compensation Oil Distributor for Hydraulic Motors

Study on the Leakage of the Continuous Rotary Electro-hydraulic Servo Motor

Analysis of the static and dynamic characteristics of the electro-hydraulic pressure servo valve of robot

Capability Analysis and Optimization Design of Variable Hydraulic Motor Used in Automobile Crane

58812 ANALYSIS OF THE PISTON/CYLINDER PAIR OF AXIAL PISTON PUMP BASED ON VIRTUAL PROTOTYPE(Fluid-Structure Interaction in MBS)

Dynamic Impact of Hydraulic Systems Using Pressure Feedback for Active Damping

The Hydraulic System Design of High Pressure Servo-control Pulse Test Bed

Structure Optimization for Improving Low Speed Performance of Continuous Rotary Electro Hydraulic Servomotor Based on the Improved Genetic Algorithm

Loading Methodology and Dynamics Analysis of the Digital-Servo Hydraulic Cylinders Group in Large Wind Turbine Drivetrain Test Bench

Modeling and Parameter Sensitivity Analysis of Valve-controlled Helical Hydraulic Rotary Actuator System

Analysis and Experimental Validation of a Pressure Control Method Using Magneto-Rheology Fluid Flows

Effecting factors of low speed characteristic of the continuous rotary electro-hydraulic servomotor applied to flight simulation turntable

Dynamic Response Analysis of Control Loops in an Electro-Hydraulic Servo Pump Control System

Continuous Rotary Motor Electro-Hydraulic Servo System Based on Discrete Sliding Mode Controller

Investigation of the leakage in the flow distribution pair of radial piston hydraulic motors through CFD analysis and experiments

FEM Analysis of Connecting-rod in Low Speed High Torque Hydraulic Motors with ANSYS

Analysis of vane loads and motion in a hydraulic double vane pump with integrated electrical drive

Simulation Analysis and Experimental Research on Static Performance of Water-hydraulic Pressure Difference Control Valve