Abstract:<p>The paper presents the numerical investigations for a light civil helicopter fuselage with the purpose of reducing the helicopter drag. Two numerical methods: Reynolds-Averaged Navier-Stokes (RANS) and a hybrid RANS-LES method: improved delayed detached-eddy simulation (IDDES) method are performed for the simulation of a prototype helicopter fuselage. The RANS method is validated by a modular helicopter fuselage with experimental data, while the IDDES method has already been used in other studies and good results have been achieved. The numerical results of the civil helicopter in terms of the aerodynamic coefficients obtained by the two methods are consistent with each other. Compared to the RANS method, the IDDES approach is capable of predicting the large separation flow of the fuselage/components and the small-scale vortices in the flow field. It is found that the hybrid method captures the periodically detached separating vortices behind the skid struts, while the flow at the same position simulated by the RANS method is still attached. Moreover, separating vortices, which develop diagonally upwards, are captured at fuselage/tail-boom junction by the hybrid method, whereas RANS simulation doesn't predict. Subsequently, the design of the helicopter drag reduction is carried out at <span class="math"><math>α=0</math></span> deg angle of attack and 0.2 Mach number through shape optimization based on the numerical simulations, and the numerical results are verified by the force tests. It shows that the optimization of the landing skids aims at reducing the strong Karman vortex shedding effect induced by the skids, which greatly decreases the total drag. Combined with the optimization of the fuselage/tail-boom transition, this approach suppresses the separation flow of the fuselage and reduces the pressure drag, and the adjustment of transition slope benefits of up to 1.18% drag reduction, while the extension of transition reduces the drag by 2.64%. The optimization of tail-boom layout demonstrates that lower tail-boom layout can contribute to a drag reduction by 4.37% (RANS) and 3.89% (test), respectively, when compared to the original tail-boom layout.</p>

Optimization of Air Dam Skirts of the Front-Wheels of a Car Based on Kriging Model

Parameters optimization of interconnected hydro-pneumatic suspension for road comfort and road-friendliness based on genetic algorithm

Multiobjective Shape Optimization of A Hypersonic Lifting Body Using A Correlation-Based Transition Model

Multi-objective and Multi-criteria Decision Optimization of Automobile Suspension Parameters

Optimization of aerodynamic drag reduction for vehicles with non-smooth surfaces and research on aerodynamic characteristics under crosswind

Structural Multi-objective Optimization Design of Air-suspending Frictionless Pneumatic Cylinders

Aerodynamic shape optimization using design-variables-screening method

On the aerodynamic effects of the optimised DrivAer fastback model car under adverse situations

Multi-objective optimization study on the power cooling performance and the cooling drag of a full-scale vehicle

CFD Analysis on Effect of Front Windshield Angle on Aerodynamic Drag

Genetic algorithm-based optimization design method of the Formula SAE racing car’s rear wing

City Car Drag Reduction by Means of Shape Optimization and Add-On Devices

Extended Study of Full-Scale Wind Tunnel Test and Simulation Analysis Based on DrivAer Model

Numerical investigations on drag reduction of a civil light helicopter fuselage

On the Drag Reduction Optimization of the DrivAer Fastback Model Car with Digital Side Mirror

Numerical Drag Reduction of a Ground Vehicle by NACA2415 Airfoil Structured Vortex Generator and Spoiler

Surrogate-based drag optimization of Autonomous Remotely Vehicle using an improved Sequentially Constrained Monte Carlo Method

Numerical Study on Aerodynamic Noise Reduction in Passenger Car with Fender Shape Optimization

A Study of Multi-Objective Aerodynamic Optimization Design for Variable Camber Airfoils and High Lift Devices

Application and Optimization of Drag Reduction Characteristics on the Flow Around a Partial Grooved Cylinder by Using the Response Surface Method

Research on precise and standardized numerical simulation strategy for vehicle aerodynamics