A System for Dynamically Measuring the Geometric Parameters of Wheelset

冯其波,陈士谦,崔建英,李凤山,张英杰

DOI: https://doi.org/10.3321/j.issn:1001-4632.2008.05.026

2008-01-01

Abstract:A system for dynamically measuring the geometric parameters of wheelset has been developed,which consists of three sub-systems,namely,the triggering subsystem,the measurement subsystem mounted on the rails and the indoor data collecting and processing subsystem.When trains pass through the measurement system with low speed,the wheel flat and abrasion can be measured dynamically and quantitatively by use of four sets of parallelogram mechanisms together with eddy-current displacement transducers.Two laser displacement sensors are used to continuously measure the distance between the wheel tread and the laser sensor from both sides of the wheel when the wheel rolls along the rail,thus the diameter of wheel tread can be dynamically obtained by computation.Six laser displacement transducers are used,and the flange thickness,rim width, and the distance between the internal faces of the wheelset can be dynamically measured through the integrated measurement of these six laser sensors.The developed system was installed in a station,and field tests were made on the system,showing that the measurement method above mentioned is workable and the system can be used to dynamically measure the geometric parameters of the wheelset such as the tread diameter,the wheel flat and abrasion,flange thickness,rim width,and distance between the internal faces.